Buscar
Mostrando ítems 1-10 de 313
A Quality Assessment of Titanium Castings Produced in an Experimental Short-Heating-Cycle Investment
(Univ Fed Sao Carlos, Dept Engenharia Materials, 2014-03-01)
The aim of this study was to evaluate the quality of casting produced in an experimental short-term heating-cycle investment. Thus, reaction layer and castability of titanium casting using an experimental spinel-based ...
The Effect of Coating Patterns with Spinel-Based Investment on the Castability and Porosity of Titanium Cast into Three Phosphate-Bonded Investments
(WILEY-BLACKWELL, 2010)
Purpose: This study evaluated the effect of pattern coating with spinel-based investment Rematitan Ultra (RU) on the castability and internal porosity of commercially pure (CP) titanium invested into phosphate-bonded ...
The Effect of Coating Patterns with Spinel-Based Investment on the Castability and Porosity of Titanium Cast into Three Phosphate-Bonded Investments
(Wiley-Blackwell, 2010-10-01)
Purpose: This study evaluated the effect of pattern coating with spinel-based investment Rematitan Ultra (RU) on the castability and internal porosity of commercially pure (CP) titanium invested into phosphate-bonded ...
A Quality Assessment of Titanium Castings Produced in an Experimental Short-Heating-Cycle Investment
(Univ Fed Sao Carlos, Dept Engenharia Materials, 2014)
Effect of phosphate-bonded investments on titanium reaction layer and crown fit
(2010-04-01)
This study analyzed the reaction layer and measured the marginal crown fit of cast titanium applied to different phosphate-bonded investments, prepared under the following conditions (liquid concentration/casting temperature): ...
Effect of phosphate-bonded investments on titanium reaction layer and crown fit
(2010-04-01)
This study analyzed the reaction layer and measured the marginal crown fit of cast titanium applied to different phosphate-bonded investments, prepared under the following conditions (liquid concentration/casting temperature): ...
Influence of investment granulometry on the castability and surface roughness of castings obtained with Ni/Cr alloys
(ABM, ABC, ABPol, 2009)
The aim of this study was to verify the influence of investment granulometry on the castability and surface roughness of Ni/Cr castings. Four investments were selected for casting according to decreasing order of granulometry: ...
IMPROVEMENT TO THE MARGINAL COPING FIT of COMMERCIALLY PURE TITANIUM CAST IN PHOSPHATE-BONDED INVESTMENT BY USING A SIMPLE PATTERN COATING TECHNIQUE
(Mosby-elsevier, 2012-07-01)
Statement of problem. Coatings of zirconite, Y2O3 or ZrO2 on wax patterns before investing in phosphate-bonded investments have been recommended to reduce the reaction layer in titanium castings, but they are not easily ...