Buscar
Mostrando ítems 1-10 de 419
An AI-Extended Prediction of Erosion-Corrosion Degradation of API 5L X65 Steel
(MDPI, 2023)
The application of Artificial Neuronal Networks (ANN) offers better statistical accuracy in erosion-corrosion (E-C) predictions compared to the conventional linear regression based on Multifactorial Analysis (MFA). However, ...
Use of Electrochemical Tests for Assessment of the Effect of Erosive Particle Size on the Erosion-Corrosion Behaviour of AISI 304L Austenitic Stainless Steel.
(Dot Editoração Eletrônica & Multimídia,São Carlos, 2016)
The degradation of AISI 304L stainless steel under static corrosion, liquid impingement and corrosion-erosion was studied using polarization curves. Static corrosion and liquid impingement tests were performed in 3.5% NaCl ...
Cr3C2-NiCr and WC-Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance
(ELSEVIER SCIENCE SA, 2008)
Cr3C2-NiCr and WC-Ni coatings are widely used for wear applications at high and room temperature, respectively. Due to the high corrosion resistance of NiCr binder, Cr3C2-NiCr coatings are also used in corrosive environments. ...
Cr3C2-NiCr and WC-Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance
(Elsevier B.V. Sa, 2008-01-15)
Cr3C2-NiCr and WC-Ni coatings are widely used for wear applications at high and room temperature, respectively. Due to the high corrosion resistance of NiCr binder, Cr3C2-NiCr coatings are also used in corrosive environments. ...
Cr3C2-NiCr and WC-Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance
(Elsevier B.V. Sa, 2008-01-15)
Cr3C2-NiCr and WC-Ni coatings are widely used for wear applications at high and room temperature, respectively. Due to the high corrosion resistance of NiCr binder, Cr3C2-NiCr coatings are also used in corrosive environments. ...
RESISTENCIA AL DESGASTE EROSIVO-CORROSIVO DE ACEROS AUSTENÍTICOS FERMANAL (EROSIVE-CORROSIVE WEAR RESISTANCE OF FERMANAL AUSTENITIC STEELS)
(Fondo Editorial EIA - Universidad EIA, 2013-09-27)
Se obtuvieron aleaciones austeníticas del sistema Fe-Mn-Al, en el intervalo Fe-(4,9~11,0 wt% de Al)- (17,49~34,3 wt% de Mn)-(0,43~1,25 wt% de C), las cuales fueron fundidas en un horno de inducción a partir de materiales ...
Effect of nitrogen on the corrosion-erosion synergism in an austenitic stainless steel
(ELSEVIER SCI LTD, 2011)
High temperature gas nitrided AISI 304L austenitic stainless steel containing 0.55 wt% N in solid solution, was corrosion, erosion and corrosion-erosion tested in a jet-like device, using slurry composed of 3.5% NaCl and ...
EROSION-CORROSION SYNERGISM OF AN AISI 410 MARTENSITIC STAINLESS STEEL
(UNIV NAC COLOMBIA, FAC NAC MINAS, 2009)
In this work, the behavior of an AISI 410 martensitic stainless steel under corrosion-erosion conditions is evaluated. Quenched and tempered samples were used for the wear test, using a low velocity jet-like device connected ...