The present study aimed to investigate the bond strength between resin cement and different glass-ceramics manufactured in different processing systems using two different microtensile bond strength test (μTBs) assemblies ...

Purpose: To evaluate the influence of different processing techniques, ceramic thicknesses, and cooling rate protocols on the μTBS of a veneering ceramic to zirconia (Y-TZP). Materials and Methods: Eighty Y-TZP ceramic ...

Objectives. (1) To synthesize 3 mol% yttria-stabilized zirconia (3Y-TZP) powders via coprecipitation route, (2) to obtain zirconia ceramic specimens, analyze surface characteristics, and mechanical properties, and (3) to ...

Objectives. (1) To synthesize 3 mol% yttria-stabilized zirconia (3Y-TZP) powders via coprecipitation route, (2) to obtain zirconia ceramic specimens, analyze surface characteristics, and mechanical properties, and (3) to ...

Monitoring the grinding of ceramics using the vibration signal has been presented as an alternative for the diagnosis of the workpiece surface. This paper has the objective of studying the vibration signal through spectral ...

Ceramic parts are increasingly replacing metal parts due to their excellent physical, chemical and mechanical properties, however they also make them difficult to manufacture by traditional machining methods. The developments ...

The presence of pores in ceramics is directly related to the chosen forming process. So, in the starch consolidation method, the ceramics show, after burning, pores with morphology similar to that presented by this organic ...

In this paper, the red and black pigments and slips of 63 Guanacaste ceramics were analyzed by Scanning Electronic Microscopy and infrared spectroscopy. All the pigment layers were made by dilution of a pure pigment in the ...

The effects of powder characteristics and conformation methods on green microstructure have been investigated, and microstructural evolution was analyzed based on the green density and the different sintering techniques. ...