Buscar
Mostrando ítems 1-10 de 95
Verification of applicability of the polyurethane adhesive based on castor oil in the manufacture of glued laminated bamboo
(2014)
The current concern with the environment promotes the development of new technologies for production with use of alternative materials, from renewable resources, and changes in production processes, having as main objective ...
Polyurethane-based bioadhesive synthesized from polyols derived from castor oil (Ricinus communis) and low concentration of chitosan
(Journal of Materials Research, 2017-09-25)
Polyurethane-based bioadhesive was synthesized with polyols derived from castor oil (chemically modified and unmodified) and hexamethylene diisocyanate with chitosan addition as a bioactive filler. The objective was to ...
High-density Particleboard Made from Agro-industrial Waste and Different Adhesives
(North Carolina State Univ Dept Wood & Paper Sci, 2019-01-01)
Particleboards were made using particles from sugarcane bagasse and eucalyptus residues of the pulp industry. The particleboard properties were evaluated according to ABNT NBR 14810-1 (2013), ABNT NBR 14810-2 (2013), and ...
Particulate composite based on coconut fiber and castor oil polyurethane adhesive: An eco-efficient product
(ELSEVIER SCIENCE BVAMSTERDAM, 2012)
This paper presents a study on the potential use of coconut fiber as material to produce particleboards, with two different densities (0.8 g/cm(3) and 1.0 g/cm3), using castor oil-based polyurethane adhesive and ...
Agro-industrial waste composites as components for rural buildings
(2017-06-06)
The growing demand of the consumer market for wood does not follow the same pace as its offer, demanding from the productive sector a search for alternative lignocellulosic raw materials, such as agro-industrial waste. ...
Production of particleboards with bamboo (Dendrocalamus giganteus) reinforcement
(2015-01-01)
The focus of this research was to study the utilization of residues from bamboo (Dendrocalamus giganteus) lamination in the manufacturing of panels for structural purposes. Bamboo particleboards were produced under three ...
Production of particleboards with bamboo (Dendrocalamus giganteus) reinforcement
(North Carolina State Univ Dept Wood &paper Sci, 2015-01-01)
The focus of this research was to study the utilization of residues from bamboo (Dendrocalamus giganteus) lamination in the manufacturing of panels for structural purposes. Bamboo particleboards were produced under three ...
Particleboards from CCB-Treated Pinus sp. Wastes and Castor Oil Resin: Morphology Analyses and Physical-Mechanical Properties
(2019-11-01)
This work evaluated the use of Pinus sp. wastes treated with a chromium, copper and boron compound (CCB), a wood preservative, to fabricate particleboards based on castor oil-polyurethane resin. The effects of wood particle ...