Buscar
Mostrando ítems 51-60 de 1585
Effect of nitrogen on the corrosion-erosion synergism in an austenitic stainless steel
(ELSEVIER SCI LTD, 2011)
High temperature gas nitrided AISI 304L austenitic stainless steel containing 0.55 wt% N in solid solution, was corrosion, erosion and corrosion-erosion tested in a jet-like device, using slurry composed of 3.5% NaCl and ...
Solute segregation and microstructure of directionally solidified austenitic stainless steel
(Elsevier Science SaLausanneSuíça, 2006)
Elemental determination of austenitic stainless steel alloy used as biomaterial by neutron activation analysis
(Associa????o Brasileira de Energia Nuclear, 2019)
Strategies to increase austenite FCC relative phase stability in High-Mn steels
(Elsevier Science SA, 2021-02-15)
Several strategies to increase the FCC austenite stability compared to BCC and HCP martensites have been tested and are discussed. The relative stability of the different phases was analyzed by studying the effects of: a) ...
Ultrasonic fatigue tests at high temperature on an austenitic steel
(Elsevier Ltd, 2012-12)
The objective of this paper is to study the gigacycle fatigue behavior of an austenitic steel at temperatures of 600 °C and 700 °C under fully reverse loading (R=−1). Numerical simulation by finite element method (FEM) was ...
Structure and properties of low temperature plasma carburized austenitic stainless steels
(ELSEVIER SCIENCE SA, 2009)
Austenitic stainless steels cannot be conventionally surface treated at temperatures close to 550 degrees C due to intense precipitation of nitrides or carbides. Plasma carburizing allows introducing carbon in the steel ...
Examination of the Size and Morphology of Austenite Grains in Lamellar Graphite Cast Iron
(American Foundry Society, 2020-07)
There is a current discussion concerning the austenite grains of lamellar graphite irons and its growth at different carbon equivalent contents. The term “grain” is often employed to refer not only to the primary austenite, ...
Intragranular formation of austenite during delta ferrite decomposition in a duplex stainless steel
(SPRINGER, 2010)
A Fe-22.5%Cr-4.53%Ni-3.0%Mo duplex stainless steel was solution treated at 1,325 A degrees C for 1 h, quenched in water and isothermally treated at 900 A degrees C for 5,000 s. The crystallography of austenite was studied ...
Niobium Effects on the Recrystallization Behavior on a Full Austenitic 15Cr-15Ni Stainless Steel Investigated Using Adaptive Neural Networks (ANN)
(AMER SCIENTIFIC PUBLISHERSVALENCIA, 2012)
A new series of austenitic stainless steels-Nb stabilized, without Mo additions, non-susceptible to delta ferrite formation and devoid of intemetallic phases (sigma and chi), without deformation induced martensite is being ...