Buscar
Mostrando ítems 31-40 de 859
Chloride induced corrosion of reinforcing steel evaluated by concrete resistivity measurements
(Pergamon-Elsevier Science Ltd, 2004-10)
The chloride threshold (ClTH) concentration for rebar corrosion initiation has received extensive attention over the last years. The chloride threshold concentration depends on several factors involving concrete composition ...
Formation of silver chloride nanocrystals as a corrosion product of silver in H2SO4 solution
(2012-12-01)
The purpose of this study is to characterize the corrosion product on the surface of silver, employing H2SO4 (0.5M) as electrolyte. The electrochemical parameters, Ecor, Icor, V cor and Rp were obtained after analyzing the ...
Silicate Ions as Corrosion Inhibitors for Carbon Steel in Chloride-Contaminated Concrete Pore Simulating Solutions
(NACE International, 2020-10)
Silicate ions were tested as corrosion inhibitors for construction steel using concrete pore simulating solutions contaminated with chloride ions. The results are compared to those from solutions with no silicate and with ...
Failure analysis of reinforced concrete structures subjected to chloride penetration and reinforcements corrosion
(2016-01-01)
Structural durability is an important design criterion, which must be assessed for every type of structure, especially for reinforced concrete (RC) structures. When RC structures are located in aggressive environments, its ...
Effect of temperature on the crevice corrosion of nickel alloys containing chromium and molybdenum
(Electrochemical Society, 2015-03)
Chloride-induced crevice corrosion of alloys 625, C-22, C-22HS and HYBRID-BC1 was studied at different temperatures. Crevice corrosion occurred tens of degrees below the reported critical crevice temperatures obtained ...