Buscar
Mostrando ítems 1-10 de 1287
Three-body wear effect on different CAD/CAM ceramics staining durability: Staining durability after wear
(2020-03-01)
Regardless the materials properties, the vast majority of ceramic restorations could require an individualization through the extrinsic staining to improve aesthetics. This study aimed to compare the staining wear durability ...
Durability of staining and glazing on a hybrid ceramics after the three-body wear: Hybrid ceramic stain durability
(2020-09-01)
Hybrid ceramic is a promising material for monolithic restorations that could require an individualization through the extrinsic staining to improve aesthetics. Due to the possibilities to treat this ceramic prior to ...
Effect of wear conditions, parameters and sliding motions on tribological characteristics of basalt and glass fibre reinforced epoxy composites
(2021-02-01)
Basalt fibre is a promising mineral fibre that has high potential to replace synthetic based glass fibre in today’s stringent environmental concern. In this study, friction and wear characteristics of glass and basalt ...
A comparative study on the dry sliding wear behaviour of nitrocarburised, gas nitrided, fluidised-bed nitrided, and plasma nitrided plastic mould steel
(2016-01-01)
Plastic injection moulds suffer wear due to the relative movements of the mould parts and the polymeric material flow which is often reinforced by hard abrasive fibres or whiskers. Several studies were performed on the ...
Tempering temperature effects on abrasive wear of mottled cast iron
(ELSEVIER SCIENCE SA, 2009)
The effects of different tempering temperatures (300-600 degrees C) on abrasive wear resistance of mottled cast iron were studied. Abrasive wear tests were carried out using the rubber-wheel test on quartz sand and the pin ...
Abrasive wear study of white cast iron with different solidification rates
(ELSEVIER SCIENCE SA, 2009)
The abrasive wear resistance of white cast iron was studied. The iron was solidified using two solidification rates of 1.5 and 15 degrees C/s. Mass loss was evaluated with tests of the type pin on abrasive disc using alumina ...
Experimental and numerical analysis of dry contact in the pin on disc test
(Amsterdam, 2013)
The reduction of friction and wear in systems presenting metal-to-metal contacts, as in several mechanical components, represents a traditional challenge in tribology. In this context, this work presents a computational ...
Sliding wear behavior of PVD CrN and TiN coated austempered ductile iron
(Iron Steel Inst Japan Keidanren Kaikan, 2014-06)
This work studies the sliding wear behavior of PVD coated austempered ductile iron samples. The effects of the substrate surface finishing method (grinding and polishing) and coating material (CrN and TiN) on the wear ...
Influence of wire-EDM on high temperature sliding wear behavior of WC10Co(Cr/V)
(Elsevier Ltd. All rights reserved, 2013)