Tesis
Microfissuração e evolução da hidratação de concreto de cimento portland, com e sem adição de escoria, por meio da analise de imagens
Registro en:
(Broch.)
Autor
Freitas, Fernando Augusto Ernlund de
Institución
Resumen
Orientador : Gladis Camarini Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Civil Resumo: : As condições de temperatura e umidade durante o período de cura, têm grande influência no desenvolvimento da microestrutura, durabilidade e outras propriedades do concreto. A microscopia eletrônica tem sido usada para analisar as diferenças na microestrutura e no grau de hidratação de amostras submetidas a diferentes tipos de cura. O objetivo deste trabalho foi o de avaliar as características mecânicas, absorção capilar, permeabilidade ao ar, além da evolução da hidratação por meio da análise de imagens de concretos, submetidos a dois tipos de cura: cura térmica à 60°C e cura úmida por sete dias. Nesta pesquisa foram utilizados o cimento Portland de alto-forno (53% de escória), o cimento de alta resistência inicial sem adições (sem adição de escória) e o cimento de alta resistência inicial resistente a sulfatos (27% de escória) Abstract: Temperature and moist conditions during the curing period have great influence in the development in microstructure, durability and other properties of concrete. Electronic microscopy has been used to analyze the differences in microstructure, degree of hydration and microcracks, on samples submitted to different types of curing. The objective in this research is evaluate the mechanical properties, water absorption, air permeability and the evolution of hydration by image analysis of polished sections of concrete, submitted to two types of curing, steam thermal curing (60°C) and another one, with moist curing during seven days. In this research the blast furnace slag cement was used (53% of slag), the cement with high initial strength without additions (without slag) and the cement with high initial strength with additions (27% of slag). The increase of curing temperature is an activator of slag, present in blast furnace slag cement, than, this research intends to verify the influence of slag addition in the concrete properties Mestrado Edificações Mestre em Engenharia Civil