Artículos de revistas
Non-linear 3d Finite Element Analysis Of Full-arch Implant-supported Fixed Dentures
Registro en:
Materials Science And Engineering C. , v. 38, n. 1, p. 306 - 314, 2014.
9284931
10.1016/j.msec.2014.02.021
2-s2.0-84897703898
Autor
Ferreira M.B.
Barao V.A.
Delben J.A.
Faverani L.P.
Hipolito A.C.
Assuncao W.G.
Institución
Resumen
Despite the necessity for faster clinical protocols for immediate loading of implant-supported dentures, there is a lack of biomechanical studies to confirm the rigid splinting effectiveness. We compared the stress in mandibular full-arch implant-supported fixed dentures under immediate loading through three-dimensional finite element analysis. Edentulous human mandible models were restored with a 4-implant fixed denture. Implants were splinted with a metallic framework and submitted to conventional loading (group A - control), with acrylic resin and submitted to immediate loading (group B), with a metallic framework and submitted to immediate loading (group C), and with acrylic resin and a prefabricated distal bar and submitted to immediate loading (group D). Models were supported by masticatory muscles. A 100-N oblique load was applied on the first molar. Group A presented the lowest stress and implant displacement values, whereas group D showed the highest values. In bone, groups under immediate loading exhibited the highest stress, whereas the group experiencing conventional loading showed an approximately 50% reduction. All groups submitted to immediate loading presented similar stress values in peri-implant bone. The loading protocol influenced the stress and implant displacement, but the design of the fixed denture did not affect the stress in the peri-implant bone. Rigid splinting of implants submitted to immediate loading is not essential for treatment success. © 2014 Elsevier B.V. 38 1 306 314 Nikellis, I., Levi, A., Nicolopoulos, C., (2004) Int. J. Oral Maxillofac. Implants, 19, pp. 116-123 Branemark, P.I., Hansson, B.O., Adell, R., Breine, U., Lindstrom, J., Hallen, O., Ohman, A., (1977) Scand. J. Plast. Reconstr. Surg. Suppl., 16, pp. 1-132 Ledermann, P.D., Schenk, R.K., Buser, D., (1998) Int. J. Periodontics Restorative Dent., 18, pp. 552-563 Babbush, C.A., (1986) Dent. Clin. N. Am., 30, pp. 117-131 Schnitman, P.A., Wohrle, P.S., Rubenstein, J.E., (1990) J. Oral Implantol., 16, pp. 96-105 Agnini, A., Agnini, A.M., Romeo, D., Chiesi, M., Pariente, L., Stappert, C.F., (2012) Clinical Implant Dentistry and Related Research Crespi, R., Vinci, R., Cappare, P., Romanos, G.E., Gherlone, E., (2012) Int. J. Oral Maxillofac. Implants, 27, pp. 428-434 Gallucci, G.O., Morton, D., Weber, H.P., (2009) Int. J. Oral Maxillofac. Implants, 24, pp. 132-146. , (Suppl.) Gallucci, G.O., Doughtie, C.B., Hwang, J.W., Fiorellini, J.P., Weber, H.P., (2009) Clin. Oral Implants Res., 20, pp. 601-607 Cooper, L.F., De Kok, I.J., Rojas-Vizcaya, F., Pungpapong, P., Chang, S.H., (2007) Compend. Contin. Educ. Dent., 28, pp. 216-225. , (quiz 226) Aparicio, C., Rangert, B., Sennerby, L., (2003) Clin. Implant. Dent. Relat. Res., 5, pp. 57-60 Sevimay, M., Turhan, F., Kilicarslan, M.A., Eskitascioglu, G., (2005) J. Prosthet. Dent., 93, pp. 227-234 Tada, S., Stegaroiu, R., Kitamura, E., Miyakawa, O., Kusakari, H., (2003) Int. J. Oral Maxillofac. Implants, 18, pp. 357-368 Sahin, S., Cehreli, M.C., Yalcin, E., (2002) J. Dent., 30, pp. 271-282 Assuncao, W.G., Barao, V.A., Tabata, L.F., De Sousa, E.A., Gomes, E.A., Delben, J.A., (2009) Gerodontology, 26, pp. 273-281 Barao, V.A., Assuncao, W.G., Tabata, L.F., De Sousa, E.A., Rocha, E.P., (2008) Comput. Methods Prog. Biomed., 92, pp. 213-223 Assuncao, W.G., Tabata, L.F., Barao, V.A., Rocha, E.P., (2008) J. Oral Rehabil., 35, pp. 766-774 Barbier, L., Vander Sloten, J., Krzesinski, G., Schepers, E., Van Der Perre, G., (1998) J. Oral Rehabil., 25, pp. 847-858 Barao, V.A., Assuncao, W.G., Tabata, L.F., Delben, J.A., Gomes, E.A., De Sousa, E.A., Rocha, E.P., (2009) J. Craniofac. Surg., 20, pp. 1066-1071 Barao, V.A., Delben, J.A., Lima, J., Cabral, T., Assuncao, W.G., (2013) J. Biomech., 46, pp. 1312-1320 Chun, H.J., Park, D.N., Han, C.H., Heo, S.J., Heo, M.S., Koak, J.Y., (2005) J. Oral Rehabil., 32, pp. 193-205 Branemark, P.I., Svensson, B., Van Steenberghe, D., (1995) Clin. Oral Implants Res., 6, pp. 227-231 Geng, J.P., Tan, K.B., Liu, G.R., (2001) J. Prosthet. Dent., 85, pp. 585-598 Assuncao, W.G., Barao, V.A., Tabata, L.F., Gomes, E.A., Delben, J.A., Dos Santos, P.H., (2009) J. Craniofac. Surg., 20, pp. 1173-1177 Srirekha, A., Bashetty, K., (2010) Indian J. Dent. Res., 21, pp. 425-432 Antoun, H., Belmon, P., Cherfane, P., Sitbon, J.M., (2012) Int. J. Periodontics Restorative Dent., 32, pp. 1-e9 Balshi, T.J., Wolfinger, G.J., (1996) Int. J. Oral Maxillofac. Implants, 11, pp. 106-111 Balshi, T.J., Wolfinger, G.J., (1997) Implant. Dent., 6, pp. 83-88 Schnitman, P.A., Wohrle, P.S., Rubenstein, J.E., Dasilva, J.D., Wang, N.H., (1997) Int. J. Oral Maxillofac. Implants, 12, pp. 495-503 Siirila, H.S., Nordberg, L., Oikarinen, V.J., (1988) J. Prosthet. Dent., 59, pp. 463-467 Kammeyer, G., Proussaefs, P., Lozada, J., (2002) J. Prosthet. Dent., 87, pp. 473-476 Cooper, L.F., Rahman, A., Moriarty, J., Chaffee, N., Sacco, D., (2002) Int. J. Oral Maxillofac. Implants, 17, pp. 517-525 Penarrocha, M., Boronat, A., Garcia, B., (2009) J. Oral Maxillofac. Surg., 67, pp. 1286-1293 Devocht, J.W., Goel, V.K., Zeitler, D.L., Lew, D., (2001) J. Oral Maxillofac. Surg., 59, pp. 775-778 Sertgoz, A., Guvener, S., (1996) J. Prosthet. Dent., 76, pp. 165-169 Pessoa, R.S., Vaz, L.G., Marcantonio, Jr.E., Vander Sloten, J., Duyck, J., Jaecques, S.V., (2010) Int. J. Oral Maxillofac. Implants, 25, pp. 911-919 Huang, H.L., Hsu, J.T., Fuh, L.J., Tu, M.G., Ko, C.C., Shen, Y.W., (2008) J. Dent., 36, pp. 409-417 Cruz, M., Wassall, T., Toledo, E.M., Da Silva Barra, L.P., Cruz, S., (2009) Int. J. Oral Maxillofac. Implants, 24, pp. 391-403 Ding, X., Zhu, X.H., Liao, S.H., Zhang, X.H., Chen, H., (2009) J. Prosthodont., 18, pp. 393-402 Fazi, G., Tellini, S., Vangi, D., Branchi, R., (2011) Int. J. Oral Maxillofac. Implants, 26, pp. 752-759 Cruz, M., Lourenco, A.F., Toledo, E.M., Da Silva Barra, L.P., De Castro Lemonge, A.C., Wassall, T., (2006) Technol. Health Care, 14, pp. 421-438 Cruz, M., Wassall, T., Toledo, E.M., Barra, L.P., Lemonge, A.C., (2003) Int. J. Oral Maxillofac. Implants, 18, pp. 675-684 Inou, N., Iioka, Y., Fujiwara, H., Maki, K., Functional adaptation of mandiular bone (1996) Computational Biomechanics, pp. 345-360. , K. Hayashi, H. Ishikawa, Springer-Verlag Tokyo O'Mahony, A.M., Williams, J.L., Spencer, P., (2001) Clin. Oral Implants Res., 12, pp. 648-657 Weinans, H., Huiskes, R., Grootenboer, H.J., (1993) J. Biomech., 26, pp. 1271-1281 Pessoa, R.S., Coelho, P.G., Muraru, L., Marcantonio, Jr.E., Vaz, L.G., Vander Sloten, J., Jaecques, S.V., (2011) Int. J. Oral Maxillofac. Implants, 26, pp. 1279-1287 Reilly, D.T., Burstein, A.H., (1975) J. Biomech., 8, pp. 393-405 Malo, P., De Araujo Nobre, M., Lopes, A., Moss, S.M., Molina, G.J., (2011) J. Am. Dent. Assoc., 142, pp. 310-320 Malo, P., Rangert, B., Nobre, M., (2003) Clin. Implant. Dent. Relat. Res., 5 (SUPPL. 1), pp. 2-9 Capelli, M., Zuffetti, F., Del Fabbro, M., Testori, T., (2007) Int. J. Oral Maxillofac. Implants, 22, pp. 639-644 De Bruyn, H., Van De Velde, T., Collaert, B., (2008) Clin. Oral Implants Res., 19, pp. 717-723 Chiapasco, M., Gatti, C., (2003) Clin. Implant. Dent. Relat. Res., 5, pp. 29-38 Degidi, M., Piattelli, A., (2003) J. Periodontol., 74, pp. 225-241 Aspenberg, P., Goodman, S., Toksvig-Larsen, S., Ryd, L., Albrektsson, T., (1992) Acta Orthop. Scand., 63, pp. 141-145 Goodman, S.B., (1994) Acta Orthop. Scand. Suppl., 258, pp. 1-43 Goiato, M.C., Pellizzer, E.P., Dos Santos, D.M., Barao, V.A., De Carvalho, B.M., Magro-Filho, O., Garcia, Jr.I.R., (2009) J. Craniofac. Surg., 20, pp. 2139-2142 Szmukler-Moncler, S., Piattelli, A., Favero, G.A., Dubruille, J.H., (2000) Clin. Oral Implants Res., 11, pp. 12-25 Tarnow, D.P., Emtiaz, S., Classi, A., (1997) Int. J. Oral Maxillofac. Implants, 12, pp. 319-324 Holst, S., Geiselhoeringer, H., Wichmann, M., Holst, A.I., (2008) J. Prosthet. Dent., 100, pp. 173-182 Gatti, C., Haefliger, W., Chiapasco, M., (2000) Int. J. Oral Maxillofac. Implants, 15, pp. 383-388 Chiapasco, M., (2004) Int. J. Oral Maxillofac. Implants, 19, pp. 76-91. , (Suppl.) Ericsson, I., Nilson, H., Lindh, T., Nilner, K., Randow, K., (2000) Clin. Oral Implants Res., 11, pp. 26-33 Malo, P., Rangert, B., Dvarsater, L., (2000) Clin. Implant. Dent. Relat. Res., 2, pp. 138-146 Payne, A.G., Tawse-Smith, A., Kumara, R., Thomson, W.M., (2001) Clin. Implant. Dent. Relat. Res., 3, pp. 9-19 Marzola, R., Scotti, R., Fazi, G., Schincaglia, G.P., (2007) Clin. Implant. Dent. Relat. Res., 9, pp. 136-143 Eriksson, R.A., Albrektsson, T., (1984) J. Oral Maxillofac. Surg., 42, pp. 705-711 Lee, H.J., Aparecida De Mattias Sartori, I., Alcantara, P.R., Vieira, R.A., Suzuki, D., Gasparini Kiatake Fontao, F., Tiossi, R., (2012) Implant. Dent., 21, pp. 486-490 Teixeira, M.F., Ramalho, S.A., De Mattias Sartori, I.A., Lehmann, R.B., (2010) Implant. Dent., 19, pp. 39-49 Al-Sukhun, J., Lindqvist, C., Helenius, M., (2007) J. Biomed. Mater. Res. A, 80, pp. 247-256 Niinomi, M., Materials Science and Engineering: A Structural Materials: Properties (1998) Microstruct. Process., 243, pp. 231-236 Cochran, D.L., (2000) Clin. Oral Implants Res., 11 (SUPPL. 1), pp. 33-58 Bonnet, A.S., Postaire, M., Lipinski, P., (2009) Med. Eng. Phys., 31, pp. 806-815 Cehreli, M.C., Akkocaoglu, M., Comert, A., Tekdemir, I., Akca, K., (2005) Clin. Oral Implants Res., 16, pp. 540-548 Akca, K., Akkocaoglu, M., Comert, A., Tekdemir, I., Cehreli, M.C., (2007) Int. J. Oral Maxillofac. Implants, 22, pp. 101-109 Hagberg, C., (1987) J. Craniomandibular Disord., 1, pp. 162-169 Manfredini, D., Bucci, M.B., Sabattini, V.B., Lobbezoo, F., (2011) Cranio, 29, pp. 304-312