Texto completo de evento
Application of bias correction methods to improve U3Si2 sample preparation for quantitative analysis by WDXRF
Autor
SCAPIN, MARCOS A.
GUILHEN, SABINE N.
AZEVEDO, LUCIANA C. de
COTRIM, MARYCEL E.B.
PIRES, MARIA A.F.
INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE
Resumen
The determination of silicon (Si), total uranium (U) and impurities in uranium-silicide (U3Si2) samples by wavelength dispersion X-ray fluorescence technique (WDXRF) has been already validated and is currently implemented at IPEN???s X-Ray Fluorescence Laboratory (IPEN-CNEN/SP) in S??o Paulo, Brazil. Sample preparation requires the use of approximately 3 g of H3BO3 as sample holder and 1.8 g of U3Si2. However, because boron is a neutron absorber, this procedure precludes U3Si2 sample???s recovery, which, in time, considering routinely analysis, may account for significant unusable uranium waste. An estimated average of 15 samples per month are expected to be analyzed by WDXRF, resulting in approx. 320 g of U3Si2 that wouldn???t return to the nuclear fuel cycle. This not only impacts in production losses, but generates another problem: radioactive waste management. The purpose of this paper is to present the mathematical models that may be applied for the correction of systematic errors when H3BO3 sample holder is substituted by cellulose-acetate {[C6H7O2(OH)3-m(OOCCH3)m], m = 0~3}, thus enabling U3Si2 sample???s recovery. The results demonstrate that the adopted mathematical model is statistically satisfactory, allowing the optimization of the procedure.