bachelorThesis
Control de calidad en los procesos de fabricación de ladrillos ecológicos.
Registro en:
Mena Carrera. D.A. (2020) Control de calidad en los procesos de fabricación de ladrillos ecológicos. U.T.C. Latacunga. 124 p.
T-001501
Autor
Mena Carrera, Dylan Alexander
Villamarín Jiménez, Jonathan Marcelo
Institución
Resumen
The enterprise "Ecoladrillos Cotopaxi" is a private company that dedicates its activities to the
manufacture of structural components and prefabricated materials for civil engineering
construction made of concrete, artificial stone or plaster; the ecological bricks produces there
are Lego type of 300 x 150 x 85 mm, and there are three different models: cangahua, PET and
sawdust; because of the organization does not consider which kind of brick has better
mechanical strength and moisture absorption, neither having a quality control of the product,
it increases the cost of production without complying with what is specified in the INEN 297
regulations; consequently, the objective of this work is to carry out a quality control process
of the ecological bricks for the verification of its properties in the mechanical resistance and
moisture absorption in the three types of environmental blocks manufactured by the company.
This investigation is descriptive, so it allows the data collection of the processes of ecological
bricks elaboration; after that, it is tried to obtain results of the tests of the mechanical
resistance and humidity absorption to analyze which type of brick is the most optimal. At the
same time, the method used is inductive since it starts with the formulation of the following
hypothesis that based on the quality control of the three different types of ecological bricks, it
will be identified which brick is the most convenient and optimal for its manufacturing. The
results obtained were that the composition of cangahua has better properties with a resistance
to compression, flexion, and moisture absorption of 9.74 MPa, 1.07 MPa, and 22%,
respectively which has wholly met the regulations of hollow brick compression and humidity
parameters. However, for flexion, it was less than 2 MPa specifying the normative and related
to a traditional brick that has 1.08 MPa having similar characteristics. La empresa “Ecoladrillos Cotopaxi” es una empresa que dedica sus actividades a la
fabricación de componentes estructurales y materiales prefabricados para obras de
construcción de ingeniería civil de cemento, piedra artificial o yeso, los ladrillos ecológicos
que realiza son tipo lego de 300 x 150 x 85 mm de tres tipos de ladrillo: cangahua, PET y
aserrín; debido a que la organización no considera que tipo de ladrillo tiene mejor resistencia
mecánica y absorción de humedad, al no poseer un control de calidad del producto hace que
se incremente el costo de producción sin cumplir con lo especificado en la norma INEN 297;
por tanto el objetivo del presente trabajo es realizar un control de calidad en los ladrillos
ecológicos para la verificación de las propiedades en la resistencia mecánica y absorción de
humedad en los tres tipos de ladrillos ecológicos de la empresa Ecoladrillos Cotopaxi, esta
investigación es de tipo descriptiva por lo que permite la recolección de datos de los procesos
de elaboración de los ladrillos ecológicos, mediante esto se pretende obtener resultados de los
ensayos de la resistencia mecánica y absorción de humedad para analizar qué tipo de ladrillo
es el más óptimo, y el método utilizado es inductivo ya que se parte con la formulación de la
hipótesis siguiente que en base al control de calidad de los tres diferentes tipos de ladrillos
ecológicos se identificará que ladrillo es el más conveniente y óptimo para la realización de
este producto, los resultados obtenidos fueron que la composición de cangahua posee mejores
propiedades, con una resistencia a la compresión, flexión y absorción de humedad de 9,74
MPa, 1,07 MPa y 22% respectivamente, con referencia a la normativa cumplió parámetros de
ladrillo hueco de compresión y de humedad, en cambio para flexión fue menor a 2 MPa que
especifica la normativa y se relacionó con un ladrillo tradicional que posee 1,08 MPa teniendo
características similares