| dc.creator | Rodrigues F.A. | |
| dc.creator | Joekes I. | |
| dc.date | 2011 | |
| dc.date | 2015-06-30T20:31:40Z | |
| dc.date | 2015-11-26T14:50:48Z | |
| dc.date | 2015-06-30T20:31:40Z | |
| dc.date | 2015-11-26T14:50:48Z | |
| dc.date.accessioned | 2018-03-28T22:02:08Z | |
| dc.date.available | 2018-03-28T22:02:08Z | |
| dc.identifier | Environmental Chemistry Letters. , v. 9, n. 2, p. 151 - 166, 2011. | |
| dc.identifier | 10.1007/s10311-010-0302-2 | |
| dc.identifier | http://www.scopus.com/inward/record.url?eid=-s2.0-799578218272&partnerID=40&md5=91b03cdfc4ea55a88ac2c9d76404274e | |
| dc.identifier | http://www.repositorio.unicamp.br/handle/REPOSIP/108241 | |
| dc.identifier | http://repositorio.unicamp.br/jspui/handle/REPOSIP/108241 | |
| dc.identifier | s2.0-799578218272 | |
| dc.identifier.uri | http://repositorioslatinoamericanos.uchile.cl/handle/2250/1254265 | |
| dc.description | Cement-based materials, such as concrete and mortars, are used in extremely large amounts. For instance, in 2009 concrete production was superior to 10 billion tons. Cement plays an important role in terms of economic and social relevance since it is fundamental to build and improve infrastructure. On the other hand, this industry is also a heavy polluter. Cement production releases 5-6% of all carbon dioxide generated by human activities, accounting for about 4% of global warming. It can release huge amounts of persistent organic pollutants, such as dioxins and heavy metals and particles. Energy consumption is also considerable. Cement production use approximately 0.6% of all energy produced in the United States. On the other hand, the chemistry underlying cement production and its applications can be very helpful to overcome these environmental issues. In terms of manufacture, there are many alternative materials that can be used to minimize carbon dioxide production and reduce energy consumption, such as calcium sulfoaluminates and β-Ca 2SiO 4-rich cements. Using residues from other industrial sectors can also improve the sustainability of cement industry. Under adequate conditions, waste materials such as tyres, oils, municipal solid waste and solvents can be used as supplementary fuel in cement plants. Concrete can be used for encapsulation of waste materials such as tyres, plastics and glasses. In this review, we discuss some aspects of the cement industry associated with environmental science. Other issues such as economic aspects, the chemistry of cement manufacture and its properties are also presented. Special attention is given to the role that cement chemistry can play in terms of sustainability. The most relevant aspects are outlined, such as the use of alternative materials, new possibilities and also the recycling of materials. It is also argued that an important aspect is the role of research and development necessary to improve cement sustainability. © 2010 Springer-Verlag. | |
| dc.description | 9 | |
| dc.description | 2 | |
| dc.description | 151 | |
| dc.description | 166 | |
| dc.description | Abdul-Wahab, S.A., Impact of fugitive dust emissions from cement plants on nearby communities (2006) Ecol Modell, 195, pp. 338-348 | |
| dc.description | Abimbola, A.F., Kehinde-Phillips, O.O., Olatunji, A.S., The Sagamu cement factory, SW Nigeria: is the dust generated a potential health hazard? (2007) Environ Geochem Health, 29, pp. 163-167 | |
| dc.description | Ahmed, S.F.U., Mihashi, H., A review on durability properties of strain hardening fibre reinforced cementitious composites (SHFRCC) (2007) Cem Concr Compos, 29, pp. 365-376 | |
| dc.description | Aiello, M.A., Leuzzi, F., Centonze, G., Maffezzoli, A., Use of steel fibers recovered from waste tyres as reinforcement in concrete: pull-out behavior, compressive and flexural strength (2009) Waste Manag, 29, pp. 1960-1970 | |
| dc.description | Aitcin, P.C., Cements of yesterday and today-concrete of tomorrow (2000) Cem Concr Res, 30, pp. 1349-1359 | |
| dc.description | Akçaoǧlu, T., Tokyay, M., Çelik, T., Effect of coarse aggregate size and matrix quality on ITZ and failure behavior of concrete under uniaxial compression (2003) Cem Concr Res, 26, pp. 633-638 | |
| dc.description | Akçaoǧlu, T., Tokyay, M., Çelik, T., Assessing the ITZ microcracking via scanning electron microscope and its effect on the failure behavior of concrete (2004) Cem Concr Res, 35, pp. 358-363 | |
| dc.description | Ambrose, C.A., Hooper, R., Potter, A.K., Singh, M.M., Diversion from landfill: quality products from valuable plastics (2002) Resour Conserv Recycling, 36, pp. 309-318 | |
| dc.description | Standard specification for Portland cement, , ASTM C150/C150 M-09 | |
| dc.description | Atsu, S.S., Kilicarslan, M.A., Kucukesmen, C., Aka, P.S., Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin (2006) J Prosthet Dentistry, 90, pp. 430-436 | |
| dc.description | Azenha, M., Faria, R., Ferreira, D., Identification of early-age concrete temperatures and strains: monitoring and numerical simulation (2009) Cem Concr Compos, 31, pp. 369-378 | |
| dc.description | Lund, P., Impacts of EU carbon emission trade directive on energy-intensive industries-Indicative micro-economic analyses (2007) Eco Econ, 63, pp. 799-806 | |
| dc.description | Luttropp, C., Johansson, J., Improved recycling with life cycle information tagged to the product (2010) J Clean Prod, 18, pp. 346-354 | |
| dc.description | Luz, C.A., Rocha, J.C., Cheriaf, M., Pera, J., Use of sulfoaluminate cement and bottom ash in the solidification/stabilization of galvanic sludge (2006) J Hazard Mat B, 136, pp. 837-845 | |
| dc.description | Mahfouz, M., Miranda, M.S., Oliveira, M.B.R., Cassiola, F., Rodrigues, F.A., Biogenic cements from rice hull ash doped with aluminum and iron (2008) Chemosphere, 73, pp. 832-836 | |
| dc.description | Malhotra, V.M., (1983) Superplasticizers and other chemical admixtures in concrete: Proceedings, third international conference, , American Concrete Institute, Ottawa, Canada | |
| dc.description | Mandal, S.K., Madheswaran, S., Environmental efficiency of the Indian cement industry: an interstate analysis (2010) Eng Policy, 38, pp. 1108-1118 | |
| dc.description | Manzano, H., Ayuela, A., Dolado, J.S., On the formation of cementitious C-S-H nanoparticles (2007) J Comput-Aided Mater Des, 14, pp. 45-51 | |
| dc.description | Maslehuddin, M., Al-Amoudi, O.S.B., Rahman, M.K., Ali, M.R., Barry, M.S., Properties of cement kiln dust concrete (2009) Constr Build Mat, 23, pp. 2357-2361 | |
| dc.description | Massicotte, R., Robidoux, P.-Y., Sauvé, S., Flipo, D., Mathiot, A., Fournier, M., Trottier, B., Immunotoxicological response of the earthworm Lumbricus terrestris following exposure to cement kiln dusts (2004) Ecotoxicol Environ Saf, 59, pp. 10-16 | |
| dc.description | Matschei, T., Lothenbach, B., Glasser, F.P., The AFm phase in Portland cement (2007) Cem Concr Res, 37, pp. 118-130 | |
| dc.description | Batayneh, M., Marie, I., Asi, I., Use of selected waste materials in concrete mixes (2003) Waste Manag, 27, pp. 1870-1876 | |
| dc.description | Matschei, T., Lothenbach, B., Glasser, F.P., Thermodynamic properties of Portland cement hydrates in the system CaO-Al 2O 3-SiO 2-CaSO 4-CaCO 3-H 2O (2007) Cem Concr Res, 37, pp. 1379-1410 | |
| dc.description | Mechling, J.M., Lecomte, A., Diliberto, C., Relation between cement composition and compressive strength of pure pastes (2009) Cem Concr Compos, 31, pp. 255-262 | |
| dc.description | Mehta, P.M., Monteiro, P.J.M., (1993) Concrete Microstructure, Properties and Materials, , 2nd edn., New York: McGraw-Hill | |
| dc.description | Merino, M.R., Astorqui, J.S.C., Cortina, M.G., Viability analysis and constructive applications of lightened mortar (rubber cement mortar) (2007) Constr Build Mat, 21, pp. 1785-1791 | |
| dc.description | Mertens, G., Snellings, R., Balen, K.V., Bicer-Simsir, B., Verlooy, P., Elsen, J., Pozzolanic reactions of common natural zeolites with lime and parameters affecting their reactivity (2009) Cem Concr Res, 39, pp. 233-240 | |
| dc.description | Meyer, C., The greening of the concrete industry (2009) Cem Concr Compos, 31, pp. 601-605 | |
| dc.description | Millard, M.J., Kurtis, K.E., Effects of lithium nitrate admixture on early-age cement hydration (2008) Cem Concr Res, 38, pp. 500-510 | |
| dc.description | Minard, H., Garrault, S., Regnaud, L., Nonat, A., Mechanisms and parameters controlling the tricalcium aluminate reactivity in the presence of gypsum (2007) Cem Concr Res, 37, pp. 1418-1426 | |
| dc.description | Morales, J.A., Pirela, D., Durán, J., Determination of the levels of Na, K, Ca, Mg, Fe, Zn and Cu in aerosols of the western Venezuelan Savannah region (1996) Sci Total Environ, 180, pp. 155-164 | |
| dc.description | Morsli, K., Torre, A.G., Stöber, S., Cuberos, A.J.M., Zahir, M., Aranda, M.A.G., Quantitative phase analysis of laboratory-active belite clinkers by synchrotron powder diffraction (2007) J Am Ceram Soc, 90, pp. 3205-3212 | |
| dc.description | Bayasi, Z., Zeng, J., Properties of polypropylene fiber-reinforced concrete (1993) ACI Mater J, 90, pp. 605-610 | |
| dc.description | Moya, J.S., Lopez-Esteban, S., Pecharromán, C., The challenge of ceramic/metal microcomposites and nanocomposites (2007) Progress Mat Sci, 52, pp. 1017-1090 | |
| dc.description | Mwaiselage, J., Tveit, M., Moen, B., Yost, M., Variability in dust exposure in a cement factory in Tanzania (2005) Ann Occup Hyg, 49, pp. 511-519 | |
| dc.description | Nachbaur, L., Mutin, J.C., Nonat, A., Choplin, L., Dynamic mode rheology of cement and tricalcium silicate pastes from mixing to setting (2001) Cem Concr Res, 31, pp. 183-192 | |
| dc.description | Nakajo, K., Imazatob, S., Takahashib, T., Kibab, W., Ebisub, S., Takahashi, N., Fluoride released from glass-ionomer cement is responsible to inhibit the acid production of caries-related oral streptococci (2009) Dental Mat, 25, pp. 703-708 | |
| dc.description | Nehdi, M., Sumner, J., Recycling waste latex paint in concrete (2003) Cem Concr Res, 33, pp. 857-863 | |
| dc.description | Newmark, C.M., Price and seller concentration in cement: effective oligopoly or misspecified transportation cost? (1998) Economics Letters, 60 (1998), pp. 243-250 | |
| dc.description | Papadakis, V.G., Tsimas, S., Greek supplementary cementing materials and their incorporation in concrete (2005) Cem Concr Compos, 27, pp. 223-230 | |
| dc.description | Paulon, V.A., Molin, D.D., Monteiro, P.J.M., Statistical analysis of the effect of mineral admixtures on the strength of the interfacial transition zone (2004) Interface Sci, 12, pp. 399-410 | |
| dc.description | Peethamparan, S., Olek, J., Lovell, J., Influence of chemical and physical characteristics of cement kiln dusts (CKDs) on their hydration behavior and potential suitability for soil stabilization (2008) Cem Concr Res, 38, pp. 803-815 | |
| dc.description | Pellegrino, C., Porto, F., Modena, C., Rehabilitation of reinforced concrete axially loaded elements with polymer-modified cementicious mortar (2009) Constr Build Mat, 23, pp. 3129-3137 | |
| dc.description | Becchio, C., Corgnati, S.P., Kindinis, A., Pagliolico, S., Improving environmental sustainability of concrete products: investigation on MWC thermal and mechanical properties (2009) Eng Build, 41, pp. 1127-1134 | |
| dc.description | Péra, J., Ambroise, J., New applications of calcium sulfoaluminate cement (2004) Cem Concr Res, 34, pp. 671-676 | |
| dc.description | Peterson, V.K., Juenger, M.C.G., Hydration of tricalcium silicate: effects of CaCl 2 and sucrose on reaction kinetics and product formation (2006) Chem Mater, 18, pp. 5798-5804 | |
| dc.description | Phair, J.H., Green chemistry for sustainable cement production and use (2006) Green Chem, 8, pp. 763-780 | |
| dc.description | Phuong, N.T., Villoutreix, G., Preparation of recycled polypropylene/organophilic modified layered silicates nanocomposites part i: the recycling process of polypropylene and the mechanical properties of recycled polypropylene/organoclay nanocomposites (2008) J Reinforced Plast Compos, 27, pp. 1983-2000 | |
| dc.description | Pingale, N.D., Shukla, S.R., Microwave assisted ecofriendly recycling of poly (ethylene terephthalate) bottle waste (2008) Europen Polym J, 44, pp. 4151-4156 | |
| dc.description | Polat, R., Gürol, A., Budak, G., Karabulut, A., Ertuǧrul, M., Elemental composition of cement kiln dust, raw material and cement from a coal-fired cement factory using energy dispersive X-ray fluorescence spectroscopy (2004) J Quant Spec Radiative Transfer, 83, pp. 377-385 | |
| dc.description | Poon, C.S., Kou, S.C., Lam, L., Use of recycled aggregates in molded concrete bricks and blocks (2002) Constr Build Mat, 16, pp. 281-289 | |
| dc.description | Prisciandaro, M., Mazziotti, G., Veglio, F., Effect of burning supplementary waste fuels on the pollutant emissions by cement plants: a statistical analysis of process data (2003) Resour Conserv Recycl, 39, pp. 161-184 | |
| dc.description | Pulselli, R.M., Simoncini, E., Ridolfi, R., Bastianoni, S., Specific emergy of cement and concrete: An energy-based appraisal of building materials and their transport (2008) Ecol Indicators, 8, pp. 647-656 | |
| dc.description | Rahal, K., Mechanical properties of concrete with recycled coarse aggregate (2007) Build Environ, 42, pp. 407-415 | |
| dc.description | Belmouden, Y., Lestuzzi, P., Analytical model for predicting nonlinear reversed cyclic behaviour of reinforced concrete structural walls (2007) Eng Struct, 29, pp. 1263-1276 | |
| dc.description | Raupp-Pereira, F., Ball, R.J., Rocha, J., Labrincha, J.A., Allen, J.C., New waste based clinkers: Belite and lime formulations (2008) Cem Concr Res, 38, pp. 511-521 | |
| dc.description | Rehan, R., Nehdi, M., Carbon dioxide emissions and climate change: policy implications for the cement industry (2005) Environ Sci Policy, 8, pp. 105-114 | |
| dc.description | Reis, M.F., Sampaio, C., Aguiar, P., Melim, J.M., Miguel, J.P., Päpke, O., Biomonitoring of PCDD/Fs in populations living near Portuguese solid waste incinerators: levels in human milk (2007) Chemosphere, 67, pp. S231-S237 | |
| dc.description | Richardson, I.G., The nature of the hydration products in hardened cement pastes (2000) Cem Concr Compos, 22, pp. 97-113 | |
| dc.description | Ridi, F., Fratini, E., Mannelli, F., Baglioni, P., Hydration process of cement in the presence of a cellulosic additive. A calorimetric investigation (2005) J Phys Chem B, 109, pp. 14727-14734 | |
| dc.description | Robinson, G.R., Menzie, W.D., Hyun, H., Recycling of construction debris as aggregate in the Mid-Atlantic Region, USA (2004) Resour Conserv Recycl, 42, pp. 275-294 | |
| dc.description | Rock, M., Murphy, J.T., Rasiah, R., van Seters, P., Managi, S., A hard slog, not a leap frog: Globalization and sustainability transitions in developing Asia (2009) Technol Forecast Soc Change, 76, pp. 241-254 | |
| dc.description | Rodrigues, F.A., Synthesis of chemically and structurally modified dicalcium silicate (2003) Cem Concr Res, 29, pp. 1549-1551 | |
| dc.description | Rodrigues, F.A., Low-temperature synthesis of cements from rice hull ash (2003) Cem Concr Res, 33, pp. 1525-1529 | |
| dc.description | Rodrigues, F.A., Joekes, I., Macro-defect free cements: a new approach (1998) Cem Concr Res, 28, pp. 877-885 | |
| dc.description | Benestad, C., Incineration of hazardous waste in cement kilns (1989) Waste Manage Res, 7, pp. 351-353 | |
| dc.description | Rodrigues, F.A., Monteiro, P.J.M., Hydrothermal synthesis of cement from rice hull ash (1999) J Mat Sci Letters, 19, pp. 1551-1552 | |
| dc.description | Romano, J.S., Bernardi, R., Rodrigues, J.L.T., Segre, N., Calcium Silicate cements obtained from rice hull ash: a comparative study (2006) J Mat Sci, 41, pp. 1775-1779 | |
| dc.description | Romano, J.S., Marcato, P.D., Rodrigues, F.A., Synthesis and Characterization of Manganese Oxide-Doped Dicalcium Silicates Obtained from Rice Hull Ash (2007) Powder Technol, 178, pp. 5-9 | |
| dc.description | Sabir, B.B., Wild, S., Bai, J., Metakaolin and calcined clays as pozzolans for concrete: a review (2001) Cem Concr Compos, 23, pp. 441-454 | |
| dc.description | Sahu, S., Thaulow, N., Delayed ettringite formation in Swedish concrete railroad ties (2004) Cem Concr Res, 34, pp. 1675-1681 | |
| dc.description | Santos, R.S., Rodrigues, F.A., Segre, N., Joekes, I., Macro-defect free cements Influence of poly(vinyl alcohol), cement type, and silica fume (1999) Cem Concr Res, 28, pp. 747-751 | |
| dc.description | Schackelford, J.F., Doremus, R.H., (2008) Ceramic and Glass Materials Structure, Properties and Processing, , New York: Springer | |
| dc.description | Schecter, A., Birnbaum, L., Ryan, J.J., Constable, J.D., Dioxins: an overview (2006) Environ Res, 101, pp. 419-428 | |
| dc.description | Scrivener, K.L., Kirkpatrick, J.R., Innovation in use and research on cementitious material (2008) Cem Concr Res, 38, pp. 128-136 | |
| dc.description | Shah, A.A., Hasan, F., Hameed, A., Ahmed, S., Biological degradation of plastics: a comprehensive review (2008) Biotechnol Adv, 26, pp. 246-265 | |
| dc.description | Bignozzi, M.C., Sandrolini, F., Tyre rubber waste recycling in self-compacting concrete (2006) Cem Concr Res, 36, pp. 735-739 | |
| dc.description | Shen, L., Cheng, S., Gunson, A.J., Wan, H., Urbanization, sustainability and the utilization of energy and mineral resources in China (2005) Cities, 22, pp. 287-302 | |
| dc.description | Shi, C., Qian, J., High performance cementing materials from industrial slags-a review (2000) Resour Conserv Recycling, 29, pp. 195-207 | |
| dc.description | Shi, J., Xu, Y., Estimation and forecasting of concrete debris amount in China (2006) Resour Conserv Recycling, 49, pp. 147-158 | |
| dc.description | Shi, C., Meyer, C., Behnood, A., Utilization of copper slag in cement and concrete (2008) Resour Conserv Recycl, 52, pp. 1115-1120 | |
| dc.description | Shih, L.H., Cement transportation planning via fuzzy linear programming (1999) Int J Production Economics, 58, pp. 277-287 | |
| dc.description | Siddique, R., Klaus, J., Influence of metakaolin on the properties of mortar and concrete: a review (2009) Appl Clay Sci, 43, pp. 392-400 | |
| dc.description | Siddique, R., Naik, T.R., Properties of concrete containing scrap-tire rubber-an overview (2004) Waste Manag, 24, pp. 563-569 | |
| dc.description | Siddique, R., Khatib, J., Kaur, I., Use of recycled plastic in concrete: a review (2008) Waste Manag, 28, pp. 1835-1852 | |
| dc.description | Soroushian, P., Ravanbakhsh, S., Nagi, M.A., Laboratory evaluation and field application of concrete reinforced with aramid fiber-reinforced polymer bars (2003) ACI Mater J, 99, pp. 584-590 | |
| dc.description | Spoo, J., Elsner, P., Cement burns: a review 1960-2000 (2001) Contact Dermatiti, 4, pp. 68-71 | |
| dc.description | Boesel, L.F., Reis, R.L., A review on the polymer properties of Hydrophilic, partially degradable and bioactive acrylic cements (HDBC) (2008) Prog Polym Sci, 33, pp. 180-190 | |
| dc.description | Srogi, K., Levels and congener distributions of PCDDs, PCDFs and dioxin-like PCBs in environmental and human samples: a review (2008) Environ Chem Lett, 6, pp. 1-28 | |
| dc.description | Sun, Y., Zhuang, G., Wang, Y., Han, L., Guo, J., Dan, M., Zhang, W., Hao, Z., The air-borne particulate pollution in Beijing-concentration, composition, distribution and sources (2004) Atmospheric Environ, 38, pp. 5991-6004 | |
| dc.description | Suresh, A.K., Ghoroi, C., Solid-solid reactions in series: a modeling and experimental study (2009) AIChE J, 55, pp. 2399-2413 | |
| dc.description | Szabó, L., Hidalgo, I., Ciscar, J.C., Soria, A., CO 2 emission trading within the European Union and Annex B countries: the cement industry case (2006) Energy Policy, 34, pp. 72-87 | |
| dc.description | Tafunell, X., On the origins of ISI: the Latin American cement industry, 1900-1930 (2007) J Lat Amer Stud, 39, pp. 299-328 | |
| dc.description | Tam, V.W.Y., Tam, C.M., A review on the viable technology for construction waste recycling (2006) Resources Conserv Recycling, 47, pp. 209-221 | |
| dc.description | Tang, K.M., Nace, C.G., Lynes, C.L., Maddaloni, M.A., Laposta, D., Callahan, K.C., Characterization of background concentrations in Upper Manhattan, New York apartments for select contaminants identified in world trade center dust (2004) Environ Sci Technol, 38, pp. 6482-6490 | |
| dc.description | Taylor, F.W., (1997) Cement Chemistry, , London: Academic Press | |
| dc.description | Thomas Edsison papers, , http://edison.rutgers.edu/cemepats.htm, Available at, Accessed April 26 2010 | |
| dc.description | Tian, B., Cohen, M.D., Does gypsum formation during sulfate attack on concrete lead to expansion? (2000) Cem Concr Res, 30, pp. 117-123 | |
| dc.description | Börjesson, P., Gustavsson, L., Greenhouse gas balances in building construction: wood versus concrete from life-cycle and forest land-use perspectives (2000) Eng Policy, 28, pp. 575-588 | |
| dc.description | Trtnik, G., Kavčič, F., Turk, G., The use of artificial neural networks in adiabatic curves modeling (2008) Automation in Construction, 18, pp. 10-15 | |
| dc.description | Turatsinze, A., Bonnet, S., Granju, J.-L., Potential of rubber aggregates to modify properties of cement based-mortars: Improvement in cracking shrinkage resistance (2007) Constr Build Mater, 21, pp. 176-181 | |
| dc.description | Turki, M., Bretagne, E., Rouis, M.J., Quéneudec, M., Microstructure, physical and mechanical properties of mortar-rubber aggregates mixtures (2009) Constr and Build Mat, 23, pp. 2715-2722 | |
| dc.description | Türkmenoǧlu, A.G., Yavuz-Işikli, N., Mineralogy, chemistry and potential utilization of clays from coal deposits in the Kütahya province, Western Turkey (2008) Applied Clay Sci, 42, pp. 63-73 | |
| dc.description | (2007) Mineral Commodities Summaries 2007, , http://minerals.usgs.gov/minerals/pubs/mcs/, US Department of Interior, US Geological Survey, available at | |
| dc.description | van Berlo, D., Haberzettl, P., Gerloff, K., Li, H., Scherbart, A.M., Albrecht, C., Schins, R.P.F., Investigation of the cytotoxic and proinflammatory effects of cement dusts in rat alveolar macrophages (2009) Chem Re Toxicol, 22, pp. 1548-1558 | |
| dc.description | van Loo, W., Dioxin/furan formation and release in the cement industry (2008) Environ Toxicol Pharmacol, 25, pp. 128-130 | |
| dc.description | van Oss, H.G., Padovani, A.C., Cement manufacture and the environment, part 1 chemistry and technology (2002) J Industrial Ecology, 6, pp. 89-105 | |
| dc.description | Velosa, A.L., Cachim, P.B., Hydraulic-lime based concrete: strength development using a pozzolanic addition and different curing conditions (2009) Constr Build Mat, 23, pp. 2107-2111 | |
| dc.description | Wallevik, J.E., Rheological properties of cement paste: thixotropic behavior and structural breakdown (2009) Cem Concr Res, 39, pp. 14-29 | |
| dc.description | Brandt, A.M., Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering (2008) Compos Struct, 86, pp. 3-9 | |
| dc.description | Worrell, E., Price, L., Martin, N., Hendriks, C., Meida, L.O., Carbon dioxide emissions from the global cement industry (2001) Annu Rev Energy Environ, 26, pp. 303-329 | |
| dc.description | Xiao, J., Cai, B.R., Classification and specificity of cement burns (1995) Burns, 21, pp. 136-138 | |
| dc.description | Yasuhara, A., Katami, T., Leaching behavior of polychlorinated dibenzo-p-dioxins and furans from the fly ash and bottom ash of a municipal solid waste incinerator (2007) Waste Manag, 27, pp. 439-447 | |
| dc.description | Young, J.F., Mindess, S., (1981) Concrete, , New Jersey: Prentice-Hall | |
| dc.description | Zaki, N.G., Khattab, I.A., El-Monem, N.B.A., Removal of some heavy metals by CKD leachate (2007) J Hazard Mat, 147, pp. 21-27 | |
| dc.description | Zassa, D.M., Favero, M., Canu, P., Two-steps selective thermal depolymerization of polyethylene. 1: feasibility and effect of devolatilization heating policy (2010) J Anal Appl Pyrolysis, 87, pp. 248-255 | |
| dc.description | Zhang, L., Wong, M.H., Environmental mercury contamination in China: sources and impacts (2007) Environ International, 33, pp. 108-121 | |
| dc.description | Zhang, L., Zhao, S.X.B., The intersectoral terms of trade and their impact on urbanization in China (2000) Post Communist Economies, 12, pp. 445-462 | |
| dc.description | Zhao, J., Platt, J.A., Dong, X., Characteriza | |
| dc.description | Brooks, J.J., Johari, M.A.M., Mazloom, M., Effect admixture on the setting times of high-strength concrete (2000) Cem Concr Compos, 22, pp. 293-301 | |
| dc.description | Buchan, P.A., Chen, J.F., Blast resistance of FRP composites and polymer strengthened concrete and masonry structures-a state-of-the-art review (2007) Compos: Part B, 38, pp. 509-522 | |
| dc.description | Burat, F., Güney, A., Kangal, M.O., Selective separation of virgin and post-consumer polymers (PET and PVC) by flotation method (2009) Waste Manag, 29, pp. 1807-1813 | |
| dc.description | Carrasco, F., Bredin, N., Heitz, M., Gaseous contaminant emissions as affected by burning scrap tires in cement manufacturing (2002) J Environ Qual, 31, pp. 1484-1490 | |
| dc.description | Carrasco, M.F., Menéndez, G., Bonavetti, V., Irassar, E.F., Strength optimization of "tailor-made-cement" with limestone filler and blast furnace slag (2005) Cem Concr Res, 35, pp. 1324-1331 | |
| dc.description | Chaipanich, A., Nochaiya, T., Wongkeo, W., Torkittikul, P., Compressive strength and microstructure of carbon nanotubes-fly ash cement composites (2007) Mat Sci Eng, A527, pp. 1063-1067 | |
| dc.description | Chan, D.Y.-L., Yang, K.-H., Hsu, C.-H., Chien, M.-H., Hong, G.-B., Current situation of energy conservation in high energy-consuming industries in Taiwan (2007) Eng Policy, 35, pp. 202-209 | |
| dc.description | Chandra, H.L., Shet, C., Ghonem, H., Some issues in the application of cohesive zone models for metal-ceramic interfaces (2002) Int J Solids Structs, 39, pp. 2827-2855 | |
| dc.description | Charlestra, L., Courtemanch, D.L., Amirbahman, A., Patterson, H., Semipermeable membrane device (SPMD) for monitoring PCDD and PCDF levels from a paper mill effluent in the Androscoggin River, Maine, USA (2008) Chemosphere, 72, pp. 1171-1180 | |
| dc.description | Chen, I.A., Juenger, M.C.G., Incorporation of waste materials into Portland cement clinker synthesized from natural raw materials (2009) J Mat Sci, 44, pp. 2617-2627 | |
| dc.description | Chen, J.J., Thomas, J.J., Taylor, H.F.W., Jennings, H.M., Solubility and structure of calcium silicate hydrate (2004) Cem Concr Res, 34, pp. 1499-1519 | |
| dc.description | Chindaprasirt, P., Jaturapitakkul, C., Sinsiri, T., Effect of fly ash fineness on compressive strength and pore size of blended cement paste (2005) Cem Concr Compos, 27, pp. 425-428 | |
| dc.description | Chou, L.H., Lu, C.-K., Chang, J.-R., Maw, T.L., Use of waste rubber as concrete additive (2007) Waste Manag Res, 25, pp. 68-76 | |
| dc.description | Chung, D., Self-monitoring structural materials (1997) Mat Sci Eng, R22, pp. 57-78 | |
| dc.description | Clark, B.A., Brown, P.W., The formation of calcium sulfoaluminate hydrate compounds part I (1999) Cem Concr Res, 29, pp. 1943-1948 | |
| dc.description | Clark, B.A., Brown, P.W., The formation of calcium sulfoaluminate hydrate compounds part II (2000) Cem Concr Res, 30, pp. 233-240 | |
| dc.description | Collepardi, M., A state-of-the-art review on delayed ettringite attack on concrete (2003) Cem Concr Compos, 25, pp. 401-407 | |
| dc.description | Colom, X., Cañavate, J., Carrillo, F., Velasco, J.I., Pagès, P., Mujal, R., Nogués, F., Structural and mechanical studies on modified reused tyres composites (2006) European Polym J, 42, pp. 2369-2378 | |
| dc.description | Colom, X., Carrillo, F., Cañavate, J., Composites reinforced with reused tyres: surface oxidant treatment to improve the interfacial compatibility (2007) Composites: Part A, 38, pp. 44-50 | |
| dc.description | Conesa, J.A., Gálvez, A., Mateos, F., Martín-Gullón, I., Font, R., Organic and inorganic pollutants from cement kiln stack feeding alternative fuels (2008) J Hazard Mat, 158, pp. 585-592 | |
| dc.description | Dahlan, I., Lee, K.T., Kamaruddin, A.H., Mohamed, A.R., Key factor in rice husk ash/CaO sorbent for high flue gas desulfurization activity (2006) Environ Sci Technol, 2006, pp. 6032-6037 | |
| dc.description | Damtoft, J.S., Lukasik, J., Herfort, D., Sorrentino, D., Gartner, E.M., Sustainable development and climate change initiatives (2008) Cem Concr Res, 38, pp. 115-127 | |
| dc.description | Denhart, H., Deconstructing disaster: Economic and environmental impacts of deconstruction in post-Katrina New Orleans (2010) Resour Conserv Recycling, 54, pp. 194-204 | |
| dc.description | Díaz, L.A., Torrecillas, R., de Aza, H.D., Pena, P., de Aza, S., Alumina-rich refractory concretes with added spinel, periclase and dolomite: a comparative study of their microstructural evolution with temperature (2005) J European Ceram Soc, 25, pp. 1499-1506 | |
| dc.description | Dickson, L.C., Lenoir, D., Hutzinger, O., Quantitative comparison of de novo and precursor formation of polychlorinated dibenzo-p- PCDD/PCDF under simulated municipal solid waste incinerator postcombustion conditions (1992) Environ Sci Technol, 26, pp. 1822-1828 | |
| dc.description | Dorozhkin, S.V., Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering (2008) Compos Struct, 86, pp. 3-9 | |
| dc.description | Duchesne, J., Reardon, E.J., Determining controls on element concentrations in cement kiln dust leachate (1998) Waste Manag, 18, pp. 339-350 | |
| dc.description | Eckert Jr., J.O., Guo, K., Heavy metals in cement and cement kiln dust from kilns co-fired with hazardous waste-derived fuel: application of EPA leaching and acid-digestion procedures (1998) J Hazard Mat, 59, pp. 55-93 | |
| dc.description | Erdem, T.K., Meral, C., Tokyay, M., Erdoǧan, T.Y., Use of perlite as a pozzolanic addition in producing blended cements (2006) Cem Concr Compos, 29, pp. 13-21 | |
| dc.description | Ewais, E.M.M., Khalil, N.M., Amin, M.S., Ahmed, Y.M.Z., Barakat, M.A., Utilization of aluminum sludge and aluminum slag (dross) for the manufacture of calcium aluminate cement (2009) Ceram Int, 35, pp. 3381-3388 | |
| dc.description | Faure, P.F., Rodts, S., Proton NMR relaxation as a probe for setting cement pastes (2008) Magn Reson Imaging, 26, pp. 1183-1196 | |
| dc.description | Ferrão, P., Ribeiro, P., Silva, P., A management system for end-of-life tyres: a Portuguese case study (2008) Waste Manag, 28, pp. 604-614 | |
| dc.description | Frías, M., Rojas, I.S., Rodríguez, C., The influence of SiMn slag on chemical resistance of blended cement pastes (2009) Constr Build Mat, 23, pp. 1472-1475 | |
| dc.description | Garrault, S., Nonat, A., Hydrated layer formation on tricalcium and dicalcium silicate surfaces: experimental study and numerical simulations (2001) Langmuir, 17, pp. 8131-8138 | |
| dc.description | Gartner, E., Industrially interesting approaches to ''low-CO2'' cements (2004) Cem Concr Res, 34, pp. 1489-1498 | |
| dc.description | Gaspar, P.L., Brito, J., Quantifying environmental effects on cement-rendered facades: a comparison between different degradation indicators (2008) Building Environ, 43, pp. 1818-1828 | |
| dc.description | Ghorab, H.Y., Kishar, E.A., Abul Elfetouh, S.H., Studies on the stability of the calcium sulfoaluminate hydrates. Part II: effects of alite, lime, and monocarboaluminate hydrate (1998) Cem Concr Res, 28, pp. 53-61 | |
| dc.description | Ghorab, H.Y., Kishar, E.A., Abul Elfetouh, S.H., Studies on the stability of the calcium sulfoaluminate hydrates part III: the monophases (1998) Cem Concr Res, 28, pp. 761-763 | |
| dc.description | Glasser, F.P., Zhang, L., High-performance cement matrices based on calcium sulfoaluminate-belite compositions (2001) Cem Concr Res, 31, pp. 1881-1886 | |
| dc.description | Götz, R., Bauer, O.-H., Friesel, P., Herrmann, T., Jantzen, E., Kutzke, M., Lauer, R., Stachel, B., Vertical profile of PCDD/Fs, dioxin-like PCBs, other PCBs, PAHs, chlorobenzenes, DDX, HCHs, organotin compounds and chlorinated ethers in dated sediment/soil cores from flood-plains of the river Elbe, Germany (2007) Chemosphere, 67, pp. 592-603 | |
| dc.description | Guo, J., Guo, J., Xu, Z., Recycling of non-metallic fractions from waste printed circuit boards: a review (2009) J Hazard Mat, 168, pp. 567-590 | |
| dc.description | Gupta, S., van der Helma, F.C.T., van Keulenc, F., Stress analysis of cemented glenoid prostheses in total shoulder arthroplasty (2004) J Biomechanics, 37, pp. 1777-1786 | |
| dc.description | Hadley, D.W., Dolch, W.L., Diamond, S., On the occurrence of hollow-shell hydration grains in hydrated cement paste (2000) Cem Concr Res, 30, pp. 1-6 | |
| dc.description | Hale, W.M., Freyne, S.F., Russel, B.W., Examining the frost resistance of high performance concrete (2009) Constr Build Mat, 23, pp. 878-888 | |
| dc.description | Harding, J.S., Brown, C., Jones, F., Taylor, R., Distribution and habitats of mosquito larvae in the Kingdom of Tonga (2007) Australian J Entomol, 46, pp. 332-338 | |
| dc.description | Hartman, M.R., Berliner, R., In situ neutron powder diffraction investigation of the hydration of tricalcium aluminate in the presence of gypsum (2005) J Solid State Chem, 178, pp. 3256-3264 | |
| dc.description | Heikal, M., Effect of temperature on the physico-mechanical and mineralogical properties of Homra pozzolanic cement pastes (2000) Cem Concr Res, 30, pp. 1835-1839 | |
| dc.description | Herdt-Losavio, M., Mauer, M.P., Carlson, G.A., Development of an exposure assessment method for epidemiological studies of New York State personnel who responded to the world trade center (2008) Disaster Ann Occup Hyg, 52, pp. 83-93 | |
| dc.description | Hernádez-Olivares, F., Barluenga, G., Bollati, M., Witoszek, B., Static and dynamic behaviour of recycled tyre rubber-filled concrete (2002) Cem Concr Res, 32, pp. 1587-1596 | |
| dc.description | Hoang, T.Q.T., Lagattu, F., Brillaud, J., Natural fiber-reinforced recycled polypropylene: microstructural and mechanical properties (2010) J Reinforced Plast Compos, 29, pp. 209-217 | |
| dc.description | Holst, O., Stenberg, B., Christiansson, M., Biotechnological possibilities for waste tyre-rubber treatment (1998) Biodegradation, 9, pp. 301-310 | |
| dc.description | Hooton, R.D., Bridging the gap between research and standards (2008) Cem Concr Res, 28, pp. 247-258 | |
| dc.description | Hopke, P.K., Contemporary threats and air pollution (2009) Atmos Environ, 43, pp. 87-93 | |
| dc.description | Horvath, A., Construction materials and the environment (2004) Annu Rev Environ Resour, 29, pp. 181-204 | |
| dc.description | Houst, Y.F., Bowen, P., Perche, F., Kauppi, A., Borget, P., Galmiche, L., Meins, J.F., Reknes, K., Design and function of novel superplasticizers for more durable high performance concrete (superplast project) (2008) Cem Concr Res, 38, pp. 1197-1209 | |
| dc.description | Huntzinger, D.N., Eatmon, T.D., A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies (2009) J Clean Prod, 17, pp. 668-675 | |
| dc.description | Idorn, G.M., Innovation in concrete research-review and perspective (2005) Cem Concr Res, 35, pp. 3-10 | |
| dc.description | Iliuta, I., Johansen, K.-D., Jensen, A., Jensen, L.S., Modeling of in-line low-NO x calciners-a parametric study (2002) Chem Eng Sci, 57, pp. 789-803 | |
| dc.description | Ishida, H., Mabushi, K., Sasaki, K., Mitsuda, T., Low-temperature synthesis of β-Ca 2SiO 4 from hillebrandite (1994) J Am Ceram Soc, 75, pp. 2427-2432 | |
| dc.description | Işikli, B., Demir, T.A., Akar, T., Berber, A., Ürer̈, S.M., Kalyoncu, C., Canbek, M., Cadmium exposure from the cement dust emissions: a field study in a rural residence (2006) Chemosphere, 63, pp. 1546-1552 | |
| dc.description | Jacott, M., Reed, C., Taylor, A., Winfield, M., (2003) Energy use in the cement industry in North America: emissions, waste generation and pollution control, , 1990-2001 Commission for Environmental Cooperation 2nd North American symposium on assessing the environmental effects of trade | |
| dc.description | Janotka, I., Krajči, L., Ray, A., Mojumdar, S.C., The hydration phase and pore structure formation in the blends of sulfoaluminate-belite cement with Portland cement (2003) Cem Concr Res, 33, pp. 489-497 | |
| dc.description | Jegatheesan, V., Liow, J.L., Shu, L., Kim, S.H., Visvanathan, C., The need for global coordination in sustainable development (2009) J Clean Prod, 17, pp. 637-643 | |
| dc.description | Jin, G.-Z., Lee, S.J., Park, H., Lee, J.-E., Shin, S.-K., Chang, S.-K., Characteristics and emission factors of PCDD/Fs in various industrial wastes in South Korea (2009) Chemosphere, 75, pp. 1226-1231 | |
| dc.description | Kacimi, L., Simon-Masseron, A., Ghomari, A., Derriche, Z., Reduction of clinkerization temperature by using phosphogypsum (2006) J Hazard Mat, B137, pp. 129-137 | |
| dc.description | Kalapathy, U., Proctor, A., Shultz, J., A simple method for production of pure silica from rice hull ash (2000) Bioresource Technol, 73, pp. 257-262 | |
| dc.description | Kalinichev, A.G., Wang, J., Kirkpatrick, R.J., Molecular dynamics modeling of the structure, dynamics and energetics of mineral-water interfaces: Application to cement materials (2007) Cem Concr Res, 37, pp. 337-347 | |
| dc.description | Kani, E.M., Allahverdi, A., Effects of curing time and temperature on strength development of inorganic polymeric binder based on natural pozzolan (2009) J Mater Sci, 44, pp. 3088-3097 | |
| dc.description | Karstensen, K.H., Formation, release and control of dioxins in cement kilns (2008) Chemosphere, 70, pp. 543-560 | |
| dc.description | Kendall, K., Howard, A.J., Birchall, J.D., Pratt, P.L., The relation between porosity, microstructure and strength, and the approach to advanced cement-based materials (1983) Phil Trans R Soc Lond, A310, pp. 139-153 | |
| dc.description | Kendall, A., Kesler, S.E., Keoleian, G.A., Geologic vs. geographic constraints on cement resources (2008) Resources Policy, 33, pp. 160-167 | |
| dc.description | Khawam, A., Flanagan, D.R., Solid-state kinetic models: basics and mathematical fundamentals (2006) J Phys Chem B, 110, pp. 17315-17328 | |
| dc.description | Konsta-Gdoutos, M.S., Shah, S.P., Hydration and properties of novel blended cements based on cement kiln dust and blast furnace slag (2003) Cem Concr Res, 33, pp. 1269-1276 | |
| dc.description | Krausmann, F., Gingrich, S., Eisenmenger, N., Erb, K.-H., Haberl, H., Fischer-Kowalski, M., Growth in global materials use, gdp and population during the 20th century (2009) Ecol Economics, 68, pp. 2696-2705 | |
| dc.description | Kurdowski, W., Duszak, S., Trybalska, B., Belite produced by means of low-temperature synthesis (1997) Cem. Concr. Res, 27, pp. 51-62 | |
| dc.description | Lea, F.M., (1971) Chemistry of Cement and Concrete, , New York: Chemical Publishing Company | |
| dc.description | Lemieux, P., Stewart, E., Realff, M., Mulholland, J.A., Emissions study of co-firing waste carpet in a rotary kiln (2004) J Environ Manage, 70, pp. 27-33 | |
| dc.description | Limbachiya, M.C., Marrocchino, E., Koulouris, A., Chemical-mineralogical characterisation of coarse recycled concrete aggregate (2007) Waste Manage, 27, pp. 201-208 | |
| dc.description | Lohman, K., Seigneur, C., Atmospheric fate and transport of dionxs: local impacts (2001) Chemosphere, 45, pp. 161-171 | |
| dc.description | Lothenbach, B., Matschei, T., Möschner, G., Glasser, F.P., Thermodynamic modelling of the effect of temperature on the hydration and porosity of Portland cement (2008) Cem Concr Res, 38, pp. 1-18 | |
| dc.relation | Environmental Chemistry Letters | |
| dc.rights | fechado | |
| dc.source | Scopus | |
| dc.title | Cement Industry: Sustainability, Challenges And Perspectives | |
| dc.type | Artículos de revistas | |
