Buscar
Mostrando ítems 1-10 de 290
SnO 2 ceramics with low electrical resistivity obtained by microwave sintering
(2011-08-01)
The main aim of this study was to develop dense and conducting SnO 2 ceramics without precipitated phases on the grain boundaries, which was verified using field emission scanning microscopy (FE-SEM) coupled with an ...
Effect of atmosphere and dopants on sintering of SnO2
(2002-12-01)
Tin oxide is an n type semiconductor material with a high covalent behavior. Mass transport in this oxide depends on the surface state promoted by atmosphere or by the solid solution of aliovalent oxide doping. The sintering ...
Behaviour of biofuel addition on metallurgical properties of sinter
(Maney Publishing, 2009-07-01)
Blast furnace gas yield is essentially controlled by a gas-solid reaction phenomenon, which strongly influences hot metal manufacturing costs. As a result of rising prices for reducing agents on the international market, ...
Evolution of the fractal structure during sintering of SnO2 compacted sol-gel powder
(1995-04-28)
The structural evolution during sintering of compacted SnO2 sol-gel powder was investigated using nitrogen adsorption isotherm analysis. Results show that for sintering temperatures up to 400°C the samples have a fractal ...
Anisotropy of crystallite growth during sintering of SnO2 xerogels
(1996-12-01)
The crytallite and pore-size evolution during isothermal sintering (400 ≤ T ≤ 700°C) of SnO2 xerogels was studied by X-ray line broadening and nitrogen adsorption-desorption isotherms. The experimental results show a strong ...
Sintering of tin oxide processed by slip casting
(2000-12-01)
Sintering of SnO 2 compacts, obtained through slip casting, was studied by means of dilatometry, Hg porosimetry, scanning electron microscopy, and density measurement (Archimedes method). Sintering is strongly influenced ...
The influence of the sintering system on PMN properties
(2003-03-15)
PMN powder samples with PbO excess of 0, 1,2 and 3% were submitted to the pressing and sintering at 1200°C for 4h with a heating rate of 3°C/min. A new sintering system, developed at our laboratories, was used. It allows ...
Sintering of porous alumina obtained by biotemplate fibers for low thermal conductivity applications
(2013-06-01)
In this research report, a sintering process of porous ceramic materials based on Al2O3 was employed using a method where a cation precursor solution is embedded in an organic fibrous cotton matrix. For porous green bodies, ...
Effects of powder preparation and sintering procedure on microstructure and dielectric properties of PLZT ceramics
(Int Inst Science Sintering (i I S S), 2003-09-01)
PLZT ceramics belong to one of the very important groups of functional materials that make a basis for the production of a large range of electronic devices. The microstructure and properties of ceramics depend on the ...
Sintering of zirconia composites obtained by slip casting
(Elsevier B.V., 2001-01-01)
Composites containing a matrix of nanometric Ce-stabilized zirconia with an addition of micrometric monoclinic zirconia were processed by slip casting and sintered at a relatively low temperature. The ratio between nanometric ...