Dissertação
Influência das armaduras longitudinais inferiores e superiores na resistência à força cortante em lajes maciças
Influence of lower and upper longitudinal reinforcement on shear strength in solid slabs
Registro en:
Autor
Costa, Mayuma de Oliveira Peres
Institución
Resumen
Among the elements that composes a strucuture, we have the surface elements,
which are the ones the thickness is smaller than the other dimensions. Slabs are
examples of these elements. Amid the many efforts it must resist, there is the shear
force, which generates shear stress. In some components, this stress is hold up by
uncracked concrete and reinforcements. In some cases, the components do not have
reinforcements to resist the shear force and then the stress must be beared through other
factors. Some of the factors that influence the resistance to this shear stress are
thickness, longitudinal reinforcement, concrete compressive strength, crack size, and
others. The present paper analyzes, experimentally, what is the influence in the
variation in the height of the pieces (8, 11 e 14 cm) and in the reinforcement in the
shear strength. For this, 9 slabs were studied, varied according to the parameters
mentioned above. Regarding the height variation, it is concluded that the increase in
height, even with the same reinforcement rates, contributed to the increase of the
ultimate resistant force. Maintaining the height, increasing the reinforcement ratio,
with the inclusion of superior reinforcement, also resulted in an increase in the
ultimate strength of the part. Analyzing the displacements, it was noticed that, for the
slab with the highest height, the part was the most rigid. Dissertação (Mestrado) Entre os elementos que compõe uma estrutura, tem-se os elementos de
superfície, que são aqueles em que a espessura é muito menor que as outras dimensões.
As lajes são exemplos desses elementos. Dentre os diversos esforços que ela deve
resistir, está a força cortante, que geram as tensões de cisalhamento no seu domínio.
Em algumas peças, essas tensões de cisalhamento são resistidas pelo concreto não
fissurado e pela armadura de cisalhamento. Em alguns casos, as peças não apresentam
armadura para resistir à força cortante e então essa tensão deve ser resistida por outros
fatores. Alguns desses fatores que influenciam na resistência a essa tensão de
cisalhamento são altura do elemento, armadura longitudinal, resistência a compressão
do concreto, tamanho das fissuras, entre outros. O presente trabalho pretende analisar,
experimentalmente, qual é a influência da variação da altura das lajes (8, 11 e 14 cm)
e da taxa de armadura. Para isso, foram estudadas 9 (nove) lajes distintas, variadas em
função dos parâmetros acima citados. Em relação a variação de altura, conclui-se que o
aumento dessa, mesmo com as mesmas taxas de armadura, contribuiu para o aumento
da força última resistente. Mantida a altura, o aumento da taxa de armadura, com a
inclusão de armadura superior, também resultou num aumento da resistência a força
última da peça. Analisando os deslocamentos, notou-se, assim como esperado, que a
laje de maior altura apresentou ser mais rigida.