info:eu-repo/semantics/bachelorThesis
Diseño y validación de un proceso estandarizado de teñido en degradé para piezas de fibra de alpaca en la empresa Andes Yarn S.A.C.
Autor
Paz Paz, Ana Lucia
Larco Cardenas, Alejandra Samanta
Resumen
La presente tesis tiene como objetivo principal el diseño y validación de un proceso estandarizado
de teñido en degradé para piezas de fibra de alpaca en la empresa Andes Yarn S.A.C., debido a
que actualmente la empresa del caso de estudio presenta limitaciones en su proceso de teñido
manual/artesanal, es decir no cuenta con parámetros técnicos estandarizados provocando
reprocesos que generan mermas y pérdidas económicas y dificultando la posibilidad de
replicabilidad de las piezas de teñido en degradé.
Según la problemática identificada, la propuesta de mejora abarca desde la recepción de la materia
prima hasta la validación del área de calidad, por lo que para su elaboración se ha desarrollado un
análisis de la situación actual de la empresa identificando la cantidad de recursos utilizados y el
levantamiento de información de su proceso manual/artesanal con el fin de identificar sus
variables y parámetros además de la cantidad de piezas reprocesadas y/o rechazadas por el área de
calidad, análisis de las instalaciones del proceso de teñido con el fin de eliminar tiempos y
desplazamientos innecesarios para obtener un proceso continuo y constante, además se realizó un
análisis de los tiempos de producción para identificar la cantidad de actividades, traslados y
demoras en la ejecución de todo el proceso de teñido en degradé, por otro lado se desarrolló un
análisis ambiental para analizar el impacto que se genera actualmente con el uso de insumos
químicos y cantidad de agua utilizada, y el análisis de costos operativos por pieza producida para
evaluar la rentabilidad de la tesis presentada.
Los resultados obtenidos de la propuesta de mejora fue la obtención de un proceso continuo, con
menos desplazamientos y un mayor ahorro en costos operativos, es decir se logró obtener una
capacidad productiva máxima de 05 piezas de teñido por proceso obteniendo una mejora del
400% con la implementación de la línea estandarizada y semi-automatizada en relación al proceso
manual/artesanal, así mismo se eliminaron los rechazos por parte de los clientes y la reducción de
reprocesos de las piezas de teñido, es decir se tiene una mejora del 100%, por otro lado se obtuvo
un ahorro en los costos operativos de un 58.22% debido a que en el proceso manual/artesanal el
mayor costo era el de mano de obra el cual se redujo un 80%.
Finalmente se logró validar que la implementación de la línea estandarizada y semi-automatizada
es rentable y existe el recupero de la inversión en corto plazo, siendo ésta propuesta óptima en
comparación al proceso manual/artesanal, siendo evaluada desde un punto ambiental, de calidad y
económico Tesis