Thesis
Caracterización de las hojas del agave angustifolia Haw a la compresión con velocidad de ensayo variable
Fecha
2012-08-22Autor
García Méndez, Rey Fernando
Institución
Resumen
Este trabajo presenta los resultados obtenidos de las propiedades mecánicas a compresión en
hojas del Agave angustifolia Haw. La metodología inició con la selección de un diseño de
experimentos completamente aleatorio y arreglo factorial 32x2, posteriormente se cosecharon
hojas de tres diferentes regiones del estado. Se determinaron las características geométricas
de las hojas seleccionadas, consecutivamente se extrajeron probetas cúbicas en sentido
paralelo y perpendicular a la fibra. Enseguida y a la par, se realizaron los ensayos de contenido
de humedad en base a la norma oficial mexicana NOM-116-SSA1-1994 y los ensayos a
compresión usando tres diferentes velocidades de deformación (2.54, 14, y 25.4mm/min) en
base a la norma ASTM D695. This work presents the obtained results of the mechanical properties to compression in leaves
of the Agave angustifolia Haw. The methodology initiated with the selection of a completely
random design of experiments and factorial adjustment 32x2, later harvested leaves of three
different regions from the state. The geometric characteristics of the selected leaves were
determined, consecutively cubical test tubes in parallel and perpendicular sense to the fiber was
extracted. Immediately and on a par, the tests of moisture content on the basis of official norm
Mexican NOM-116-SSA1-1994 and the tests to compression were realized using three different
speeds from deformation (2.54, 14, and 25.4mm/min) on the basis of norm ASTM D695.