info:eu-repo/semantics/bachelorThesis
Determinación del efecto de la velocidad de flujo ascensional y la concentración de los sólidos suspendidos en el crecimiento de los granos en un Reactor Rafa
Fecha
2021Autor
Campos Huaman, Ruth Yulisa
Cusi Vargas, Yane
Institución
Resumen
El crecimiento de la población en ciudades como Huancayo, va acompañado de un
incremento del volumen de las aguas residuales municipales con alta carga de sólidos suspendidos.
Las aguas pluviales arrastran sólidos como arena, arcilla, entre otros materiales suspendidos que
afectan a los tratamientos de depuración de aguas residuales municipales existentes.
En el presente trabajo de investigación se determinó el efecto de la velocidad del flujo
ascensional y la concentración de los sólidos suspendidos en el crecimiento de los granos
(agregados de microorganismos) en un Reactor Anaerobio de Flujo Ascendente (RAFA).
Se inicia con la caracterización de los sólidos suspendidos (arcilla caolinita), utilizando el
EDS (Espectrometría de Energía Dispersiva) acoplado al SEM se determinó su composición
química, que fue de: SiO2 (83,17%), MgO (0,21%), Al2O3 (13,52%) y KBr (3,11%). Mientras que
haciendo uso del equipo dispersión de luz dinámica (DLS), se determinó el diámetro de partícula,
que resultó de 0,32 a 0,87 um.
La segunda etapa fue evaluar la influencia de la velocidad del flujo ascensional sobre la
formación y el crecimiento de los granos, que consistió en trabajar con velocidades de flujo
ascensional de 0,3; 0,6 y 0,9 m/h, controlados mediante una bomba peristáltica de alimentación y
otra para la recirculación, midiéndose el tamaño del diámetro de grano semanalmente en el equipo
SEM, resultando granos de 10,8; 13,05 y 11,6 um en promedio respectivamente.
En la última etapa se analizó la influencia de la concentración de sólidos suspendidos en la
formación y el crecimiento de los granos, a tres diferentes concentraciones de: 212,5; 220; 280 mg
SST/L. La concentración de sólidos suspendidos se controló en la alimentación y efluente,
haciendo uso del analizador de sólidos suspendidos. Además mediante métodos estándar se determinó la concentración de sólidos suspendidos dentro del reactor, para finalmente medir el
tamaño de granos con el equipo SEM, obteniéndose granos que varían de 7,6 a 12,91 um de
diámetro de granos.
A una velocidad de flujo ascensional de 0,3 m/h, los lodos se sedimentan y se compactan
impidiendo la formación y el crecimiento de granos, mientras que a una velocidad de flujo
ascensional 0,9 m/h existe lavado de lodos. Así mismo las concentraciones altas frenan y alteran
el crecimiento constante de granos. Por lo tanto se determina que a una velocidad de flujo
ascensional de 0,6m/h y una concentración de sólidos suspendidos de 212,5 mg/L, se obtuvo un
crecimiento de grano con diámetros de hasta 13,05 um. Estos granos presentaban estabilidad
durante la operación con estas variables y el reactor mantuvo su eficiencia de remoción.