bachelorThesis
Diseño de una planta de tratamiento para las aguas residuales producidas por una fábrica de chocolate de exportación
Fecha
2017-07Autor
López Vaca, Eduardo Renán
Institución
Resumen
El sistema propuesto consiste en la combinación de procesos unitarios, que comenzará en el tanque homogenizador inicial en el cual se ajustará el pH con el propósito de obtener una estabilidad para la formación de floc (proceso de coagulación) y además en este tanque se podrá tener un control del caudal que ingresará al sistema de depuración de las aguas residuales. El segundo tanque del sistema de tratamiento propuesto será el tanque de clarificación 1, donde se producirá el proceso de coagulación y mezcla rápida, con la adición de químicos (coagulante como el Policloruro de Aluminio con una dosis de 300 mg/l y auxiliar de floculación como el Poliacrilamida con una dosis de 1.5 mg/l), dicho tanque estará compuesto por un agitador de paletas que ayudará a la formación de un excelente floc. El agua, que para entonces estará clarificada, pasará al tercer tanque del sistema, tanque sedimentador 1, en el cual se sedimentarán todos los flocs formados, luego esta agua pasará al tanque de filtración 1, el cual se compondrá de dos lechos de arena y carbón activado, que servirán para mejorar la remoción de microorganismos y fenoles presentes en el agua residual industrial de la empresa. Posterior a este tanque, el agua pasará al tanque de clarificación 2 que hará la misma función del clarificador 1, donde la dosis de coagulante y auxiliar de floculación será menor; siguiendo el proceso de tratamiento tenemos el tanque de sedimentación 2, en donde por gravedad se asentarán los flocs formados permitiendo mejorar la calidad del efluente, y donde se hará la desinfección, adicionando hipoclorito de sodio para remover microorganismos patógenos que lograsen pasar los procesos anteriores. Tanto en el sedimentador 1 como en el sedimentador 2, se producirán lodos hidratados, los cuales serán descargados en un tanque de almacenamiento de lodo; la formación de lodos será baja, y la función de dicho tanque será mantenerlos por un periodo de tiempo tal que estos comiencen a deshidratarse por gravedad, para luego ser extraídos. Por último se tiene el tanque de filtración 2, el cual está compuesto de lecho de carbón activado, donde se hará la reducción del DBO y DQO a porcentajes superiores del 95%. The proposed system consists of the combination of unit processes, which will start in the initial homogenizing tank in which the pH will be adjusted in order to obtain stability for floc formation (coagulation process). Control of the flow that will enter the sewage treatment system. The second tank of the proposed treatment system will be the clarification tank 1, where the coagulation and rapid mixing process will take place, with the addition of chemicals (coagulant such as Aluminum Polychloride with a dose of 300 mg / l flocculation aid as The polyacrylamide with a dose of 1.5 mg / l), said tank will be composed of a paddle stirrer which will help the formation of an excellent floc. The water, which by then will be clarified, will pass to the third tank of the system, sedimentator tank 1, in which all flocs formed will settle, then this water will pass to the filtration tank 1, which will be composed of two sand beds and Activated carbon, which will serve to improve the removal of microorganisms and phenols present in the industrial waste water of the company. After this tank, the water will pass to the clarification tank 2 which will perform the same function as the clarifier 1, where the coagulant and auxiliary flocculation dose will be lower; Following the treatment process we have the sedimentation tank 2, where gravity will settle the flocs formed allowing to improve the quality of the effluent, and where the disinfection will be done, adding sodium hypochlorite to remove pathogenic microorganisms that could pass the previous processes. In both settler 1 and settler 2, hydrated sludge will be produced, which will be discharged into a sludge storage tank; The sludge formation will be low and the function of said tank will be to maintain them for a period of time such that they begin to dehydrate by gravity and then be extracted. Finally we have the filtration tank 2, which is composed of bed of activated carbon, where the reduction of the BOD and COD will be made to percentages higher than 95%.