info:eu-repo/semantics/article
USE OF IN SITU TESTS FOR DETERMINATION OF SOIL SUPPORT CAPACITY
UTILIZAÇÃO DE ENSAIOS IN SITU PARA DETERMINAÇÃO DA CAPACIDADE DE SUPORTE DE SOLOS
Registro en:
10.11137/2018_2_461_470
Autor
COSTA, STEPHANNY CONCEIÇÃO FARIAS DO EGITO
LUCENA, ADRIANO ELÍSIO DE FIGUEIREDO LOPES
SOUSA, TALITA MIRANDA DE
SILVA, GUTEMBERG GONÇALVES DA
Institución
Resumen
The Standard Penetration Test (SPT) is used worldwide for information on the resistance to dynamic penetration of the soil (N). Correlations, allow calculating, using this index, soil parameters such as the relative compactness, friction angle, elastic modulus and the load capacity of the foundations. The Dynamic Cone Penetration (CPD) and Light Weight Deflectometer (LWD) are devices designed to assess parameters the floor infrastructure tiers, such as soil bearing capacity and deformability and compressibility, respectively. The objective of this study is to verify the feasibility of using the CPD and LWD for projects shallow foundations through correlations with the parameters obtained in the SPT assay. It was observed that there is a good correlation between the SPT and the CPD and between SPT and LWD for SM type soils. Therefore, it was concluded that there is a technical feasibility of the use of CPD and LWD as an alternative to SPT to identify the peformance of granular soils. O Standard Penetration Test (SPT) é utilizado mundialmente para obter informações sobre a resistência à penetração dinâmica do solo (N). Correlações permitem calcular, através deste índice, parâmetros do solo como a compacidade relativa, o ângulo de atrito, o módulo de elasticidade e a capacidade de carga das fundações. O Cone de Penetração Dinâmica (CPD) e o Light Weight Deflectometer (LWD) são equipamentos destinados a avaliar parâmetros das camadas de infraestrutura de pavimentos, como a capacidade de suporte de solos e a deformabilidade e compactação, respectivamente. O objetivo deste trabalho é verificar a viabilidade do uso do CPD e LWD para determinação da capacidade de suporte dos solos, através de correlações com os parâmetros obtidos no SPT. Observou-se que existem boas correlações entre o SPT e o CPD e entre o SPT e o LWD para solos do tipo SM. Portanto, concluiu-se que existe viabilidade técnica do uso do CPD e LWD em alternativa ao SPT para solos granulares.