info:eu-repo/semantics/article
The thermal spray as a deposition technique for thermal barrier coating: a review
Una revisión del spray térmico como técnica de deposición para capas de barreras térmicas
Autor
Rondón, Eduardo
Fernández Rojas, Freddy
Fernández Rojas, Carlos
Resumen
It is important to know the thermal barrier deposition techniques since materials with low thermal conductivity in the barrier can be obtained from them. The dependence of the thermal conductivity with the temperature can be divided into four regions. In this work, we were interested in the study of used techniques for the manufacture of materials with a desirable low thermal conductivity that will be exposed to high temperatures that is to say, materials found in the III and IV region. In these regions the thermal conductivity can be reduced increasing the porosity of the material. Through the study of the thermal barrier deposition techniques we found that the thermal spray produces a coat with high porosity, being the low velocity flame spray technique the best to produce coat of La2Zr2O7 with a minimal thermal conductivity. The thermal spray technique is low cost and almost any material can be thermally sprayed, so this can be considered a very attractive technique for industrial applications. Es importante conocer las técnicas de deposición de barreras térmicas ya que de ellas depende la obtención de materiales con baja conductividad térmica en la barrera. La dependencia de la conductividad térmica con la temperatura puede dividirse en cuatro regiones. En este trabajo estuvimos interesados en el estudio de las técnicas que se utilizan para la fabricación de materiales sometidos a muy altas temperaturas y donde se desea que su conductividad térmica sea baja, es decir, materiales que se encuentran en la región III y IV. En estas regiones se puede disminuir la conductividad térmica aumentando la porosidad del material. A través del estudio de las técnicas de deposición de barreras térmica, hemos encontrado que la técnica del spray térmico produce una alta porosidad en el recubrimiento, siendo el método de rociado con baja velocidad el mejor método para producir capas de La2Zr2O7 con mínima conductividad térmica. La técnica del spray térmico es de bajo costo y casi cualquier material puede ser rociado térmicamente, siendo así una técnica muy atractiva para aplicaciones industriales.
Ítems relacionados
Mostrando ítems relacionados por Título, autor o materia.
-
Thermal feedback during viscous flow in cylindrical conduits in media with finite thermal properties
De la Cruz - Reyna, Servando; Instituto de Geofísica, UNAM; Espindola, Victor Hugo; Instituto de Geofísica UNAM -
Thermal preference, critical thermal limits, oxygen routine consumption and active metabolic scope of Macrobrachium tenellum (Smith, 1871) maintained at different acclimation temperatures
Hernández-Sandoval, Pedro; Díaz, Fernando; Re-Araujo, Ana Denisse; López-Sánchez, J. Armando; Martínez-Valenzuela, María del Carmen; García-Guerrero, Marcelo; Rosas, Carlos -
On The Thermal Characterization Of Solids By Photoacoustic Calorimetry: Thermal Diffusivity And Linear Thermal Expansion Coefficient
Bedoya; A.; Marin; E.; Mansanares; A. M.; Zambrano-Arjona; M. A.; Riech; I.; Calderon; A.