info:eu-repo/semantics/bachelorThesis
Diseño sismo resistente de una nave industrial a dos aguas de acuerdo al R.N.E para un almacén de la empresa INDUPAC ubicada en la ciudad de Chiclayo.
Fecha
2021-05Autor
Cabanillas Cerdán, Luis Santiago
Institución
Resumen
El presente trabajo titulado “Diseño sismo resistente de una nave industrial a dos
aguas de acuerdo al R.N.E para un almacén de la empresa Indupac ubicada en la
ciudad de Chiclayo”, presenta el análisis técnico y económico de los miembros que
componen el techo a dos aguas, basados en el método de carga y resistencia (LRFD).
La estructura a diseñar tiene un área de 2400 m2 y tiene las siguientes dimensiones: 40m
de ancho o luz por 60m de largo. Además,se calculó un peso aproximado de 34405.35Kg.
Se aplicó las normas del Reglamento Nacional de Edificaciones (RNE), así como también
normas internacionales como AISC y AWS. Así mismo para el análisis y simulación
contamos con el apoyo del software SAP2000.
La estructura diseñada es de acero ASTM A500. El diseño se realizó con 11 tijerales
principales que contienen perfiles superiores HSS 8”x8”x1/8”, perfiles intermedios HSS
3”x3”x1/8” y perfiles inferiores HSS4”x4”x1/8”, 20 tijerales secundarios laterales de
perfiles rectangulares HSS4”x2”x2mm y 10 tijerales secundarios centrales
HSS4”x2”x2mm. Cuenta con columnas laterales HSS8”x8”x3/16” y centrales
HSS5”x5”x1/8”. Además, se utilizó como cobertura al calaminón tr4 de 0.45mm de
espesor.
El análisis de costos del techo a dos aguas dio como resultado un costo total de S/
150,402.14. Los planos se presentan elaborados en solidworks. The present work entitled "Design earthquake resistant of a gabled industrial warehouse
according to the RNE for a warehouse of the company Indupac located in the city of
Chiclayo", presents the structural analysis and costs of the members that make up the
gable roof , based on the load and resistance method (LRFD).
The structure to be designed has an area of 2400 m2 and has the following dimensions:
40m wide or span by 60m long. In addition, an approximate weight of 34405.35Kg was
calculated.
The standards of the National Building Regulations (RNE) were applied, as well as
international standards such as AISI, AISC, AWS, ASCE. Likewise, for the analysis and
simulation we have the support of the SAP2000 software.
The designed structure is made of ASTM A500 steel. The design was made with 11 main
trusses containing HSS8”x8” x1/8” upper sections, 3”x3”x1/8” intermediate sections and
HSS4”x4” x1 / 8” lower sections, 20 lateral secondary trusses. of rectangular profiles
HSS4”x2” x2mm and 10 central secondary trusses HSS4” x2” x2mm. It has HSS8”x8”
x3/16” side columns and HSS5” x5” x1 / 8” central columns. In addition, 0.45mm thick
calaminon tr4 was used as a cover.
The cost analysis of the gable roof resulted in a total cost of S / 150,402.14. The plans are
presented in solidworks.