info:eu-repo/semantics/bachelorThesis
Planificación y procedimiento constructivo para la fabricación y montaje de un tanque de 5000 m3 para almacenamiento de etanol basado en la norma api 650 – 2017 en el terminal de líquidos Tramarsa – Paita 2021
Fecha
2021-07-21Registro en:
690.068 VILL 2021
Autor
Villar Sandoval, Darwin Vladimir
Institución
Resumen
La presente investigación se realizó en la ciudad de Paita – Piura específicamente en el
Terminal de Líquidos Terrestre de la empresa Tramarsa, en donde se realizó la
planificación y procedimiento constructivo para la fabricación y montaje de un Tanque
de 5000m3 basado en la Norma API 650. Para la realización de la tesis se utilizó un diseño
no experimental, transversal y descriptivo, la recolección de datos se realizó con la técnica
de la observación y la revisión documental, el instrumento utilizado fueron los registros
de calidad, control de avance, y para analizar los datos se empleó el software MsProject.
El terminal de Líquidos de Tramarsa en busca de mejorar sus volúmenes de
almacenamiento de etanol optó por la construcción de un tercer tanque de misma
capacidad que los existentes.
La planificación y procedimiento constructivo del tanque de 5000m3 con el uso de nuevas
tecnologías, equipos, herramientas y maniobras de calidad no permitió la reducción en el
tiempo de construcción debido a los retrasos que fueron ocasionados por las
paralizaciones dadas durante la declaratoria de emergencia sanitaria por el Covid 19.
Finalmente, se realizó la planificación y procedimiento constructivo para la fabricación y
montaje de 01 Tanque de 5000m3 en un total de 225 días calendario según el cronograma
cumpliendo los estándares de calidad. This present work was carried out in the city of Paita - Piura specifically in the Terminal
de Liquidos Terrestre of the Tramarsa company, where the planning and construction
procedure for the manufacture and assembly of a 5000m3 Tank based on the API 650
standard was carried out. To carry out the thesis, a non-experimental, cross-sectional and
descriptive design was used, data collection was carried out with the technique of
observation and documentary review, the instrument used was quality records, progress control, and to analyze the data was used using the MsProject software.
In seeking to improve its ethanol storage volumes, the Terminal de Liquidos Terrestre of
Tramarsa opted for the construction of a third tank with the same capacity as the existing
ones.
The planning and construction procedure of the 5000m3 tank with the use of new
technologies, equipment, tools and quality maneuvers did not allow the reduction in
construction time due to the delays that were caused by the stoppages given during the
declaration of sanitary emergency by Covid 19.
Finally, the planning and construction procedure was carried out for the manufacture and
assembly of 01 Tank of 5000m3 in a total of 225 calendar days according to the schedule,
complying with quality standards.