comunicación de congreso
CNC control of a laser cutting machine
Fecha
1994Registro en:
10.1109/ISIE.1994.333112
780319613
Autor
Chiang Sánchez, Luciano Eduardo
Ramos Grez, Jorge
Institución
Resumen
This article describes the design and construction of a low power laser cutting machine with three degrees of freedom for applications such as wood, textile fabrics and the like. An available 10 Watt laser gun is used to provide the cutting mechanism. The results show that such a machine is feasible at a reasonable cost for applications where speed and repeatability are more important than high precision and power.<>
Ítems relacionados
Mostrando ítems relacionados por Título, autor o materia.
-
Application of pulsed laser ND: YAG in superduplex steel uns S 32750: Autogenous laser welding, laser welding with refusion process by laser and hybrid welding (laser/Gtaw)
Universidade Estadual Paulista (Unesp); and Technology of Mato Grosso (2020-01-01)The families of duplex and superduplex steels were developed to serve sectors that demand steels with extreme mechanical capacity and good corrosion resistance. Such characteristics are due to their structure being composed ... -
Efectos producidos por diferentes tipos de láser en córnea de cobayos: identificación de un láser capaz de provocar lesiones superficiales sin dejar cicatrices
Suarez, Alicia Carmen; Suarez, Maria Fernanda; Crim, N.; Monti, R.; Urrets-Zavalía, J. A.; Serra, H. M. (Elsevier Science, 2015-10)To evaluate the effects of four different types of lasers with different power and exposure time conditions in the cornea of normal guinea pigs. To determine which laser and conditions only damage the epithelium and ...