The biosorption of lead(II) and chromium(VI) on groundnut hull was investigated. Batch biosorption experiments were conducted to find the equilibrium time and biosorption capacity. Effect of parameters like pH, temperature and initial metal concentration was studied. The maximum biosorption capacity of lead(II) and chromium(VI) was found to be 31.54 ± 0.63 and 30.21 ± 0.74 mg g-1, respectively. The optimum pH for lead(II) and chromium(VI) removal was 5 ± 0.1 and 2 ± 0.1, respectively. The temperature change, in the range of 20 - 45ºC affected the biosorption capacity. The maximum removal of lead(II) was achieved at 20 ± 2ºC, where as maximum uptake of chromium(VI) was observed at 40 ± 2ºC. The biosorption data was fitted to the Langmuir and the Freundlich isotherm models. The Langmuir model showed better representation of data, with correlation coefficient greater than 0.98. The kinetics of biosorption followed the pseudo second order kinetics model. The thermodynamics parameters were evaluated from the experimental data.