Trabalho apresentado em evento
Glass-ceramic material from the SiO 2-Al 2O 3-CaO system using sugar-cane bagasse ash (SCBA)
Fecha
2011-08-31Registro en:
IOP Conference Series: Materials Science and Engineering, v. 18, n. SYMPOSIUM 8, 2011.
1757-8981
1757-899X
10.1088/1757-899X/18/11/112020
2-s2.0-80052098092
Autor
Universidade Estadual Paulista (Unesp)
IETCC/CSIC
Resumen
Brazil is the world's largest producer of alcohol and sugar from sugarcane. Currently, sugarcane bagasse is burned in boilers to produce steam and electrical energy, producing a huge volume of ash. The major component of the ash is SiO 2, and among the minor components there are some mineralizing agents or fluxing. Published works have shown the potential of transforming silicate-based residues into glass-ceramic products of great utility. This work reports the research results of SCBA use to produce glass-ceramics with wollastonite, rankinite and gehlenite as the major phases. These silicates have important applications as building industry materials, principally wollastonite, due to their special properties: high resistance to weathering, zero water absorption, and hardness among others. The glasses (frits) were prepared mixing ash, calcium carbonate and sodium or potassium carbonates as flux agents, in different concentrations. X-ray fluorescence was used to determine the chemical composition of the glasses and their crystallization was assessed by using thermal analysis (DTA/DSC/TGA) and X-ray diffraction. The crystallization kinetics was evaluated using the Kissinger method, giving activation energies ranging from 200 to 600 kJ/mol. © 2011 Ceramic Society of Japan.
Materias
Ítems relacionados
Mostrando ítems relacionados por Título, autor o materia.
-
Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: The effect of surface conditioning
Valandro, Luiz Felipe; Özcan, Mutlu; Bottino, Marco Cícero; Bottino, Marco Antonio; Scotti, Roberto; Della Bona, Alvaro -
Development of ceramic cutting tools for future application on dry machining
Silva, O. M M; Souza, J. V C; Nono, M. C A; Martins, G. V.; Ribeiro, M. V.; Machado, J. P B -
Development of ceramic cutting tools for future application on dry machining
CTA-IAE/AMR; Instituto Nacional de Pesquisas Espaciais (INPE); UNIFOA; Universidade Estadual Paulista (Unesp) (2010-12-15)Advanced ceramic materials constitute a mature technology with a very broad base of current and potential applications and a growing list of material compositions. Within the advanced ceramics category, silicon nitride ...