Trabajo de grado - Pregrado
Análisis computacional hidráulico en un fotoreactor de flujo pistón
Fecha
2020Registro en:
instname:Universidad de los Andes
reponame:Repositorio Institucional Séneca
Autor
Ruiz Borrás, Valentina
Institución
Resumen
En este trabajo se pretendió establecer cuáles son las diferentes configuraciones de reactores para el desarrollo de un sistema de fotoreacción homogénea. Por este motivo, se realizó un modelo de Mecánica de Fluidos Computacional (CFD) de un tubo cilíndrico, en el cual se le midieron diferentes variables de diseño, entre ellas la velocidad del flujo dentro del reactor, el comportamiento pistón del fluido y el régimen al cuál se encuentra el agua en cada una de las partes designadas del sistema. Cada una de las variables de estudios se midieron en tres sistemas con un tipo de entrada-salida diferente, pero manteniendo un diámetro y una longitud uniforme. Igualmente, se utilizaron tres caudales diferentes de medición con el fin de identificar las variaciones del comportamiento del compuesto de estudio en los diversos sistemas. The aim of this work was to establish the different configurations of reactors for the development of a homogeneous photoreaction system. For this reason, a cylindrical tube was developed in a Computational Fluid Mechanic Model (CFD). This model was measured with different design variables. Including the velocity of the flow within the reactor, the piston behavior of the fluid and the water status at each of the designated parts of the system. Each of the study variables ware measured in three systems with a different input-output type but maintaining a uniform diameter and length. Similarly, three different measurement flows were used in order to identify variations in the behavior of the compound.