info:eu-repo/semantics/article
Full scale fatigue test performed to the bolster beam of a railway vehicle
Date
2018-02-01Registration in:
19552513
19552505
WOS;000424264600021
SCOPUS;2-s2.0-84996483453
10.1007/s12008-016-0361-0
Author
Gutiérrez-Carvajal, R.E.
Betancur, G.R.
Barbosa, J.
Castañeda, L.F.
Zaja¸c, G.
Gutiérrez-Carvajal, R.E.
Betancur, G.R.
Barbosa, J.
Castañeda, L.F.
Zaja¸c, G.
Institutions
Abstract
Many structural elements are exposed to conditions of load that are difficult to consider during the design stage, such as environment uncertainties, random impacts, overloads and inherent material idealization amongst others, hence, miss-estimating its life-time cycle. One way to test those designs is to construct a representative full-scale specimen and test it under the most critical load conditions in a controlled laboratory. Herein, we present a case of study of the fatigue test performed over a bolster beam redesigned in Universidad EAFIT belonging to a railway vehicle. The test was composed by three stages, each one testing a different load hypothesis. The bolster beam was instrumented at the most critical locations, following the results of a FEM analysis previously computed. As results, the most critical welds were identified and the total damage computed for an equivalent operation of eighteen-years, and also the behaviour of the specimen in presence of extreme longitudinal loads. © 2016, Springer-Verlag France.