Artículos de revistas
Production and characterization of cr and crn hard coatings deposited by unbalanced magnetron sputtering
Fecha
2013Autor
López Santos, Mónica B.
Institución
Resumen
In this work, we present the results of Cr and CrN coatings deposited using unbalanced magnetron sputtering at different substrate temperatures. The layers with thickness and lt; 1μm were produced at different temperatures (100, 300 and 500 oC) on AISI H13 steel and (100) Silicon and analyzed by XRD and SEM techniques. In both cases the diffraction peaks showed slight shifts as a function of substrate temperature. These shifts could be an indicative of the presence of compressive stress, which increases with temperature. Additionally, the analyses of scanning electron microscope (SEM) showed that the coated surfaces at temperatures and lt; 500 oC, are characterized mainly by a morphology with a smooth appearance, compact, homogeneous and displayed columnar growth, without evidence neither of microcracking nor delamination. This behavior suggests that in this temperature range, there is a slight dependence on the substrate temperature. On the contrary, samples prepared at 500 oC showed the presence of larger grains and a more compact growth. En este trabajo se presentan los resultados de recubrimientos de Cr y CrN depositados mediante la técnica de sputtering reactivo DC con magnetrón desbalanceado. Los recubrimientos fueron producidos a diferentes temperaturas (100, 300 y 500oC) sobre acero AISI H13 y silicio (100). Los recubrimientos con espesores and lt; 1μm fueron analizados por Difracción de Rayos X (DRX) y Microscopía Electrónica de Barrido (SEM). Los picos de difracción en los espectros de rayos X de ambos recubrimientos presentaron leves corrimientos en función de la temperatura del sustrato, lo que sería indicativo de la presencia de esfuerzos compresivos, los cuales incrementan con el aumento de la temperatura. Adicionalmente los análisis por SEM, mostraron que las superficies recubiertas a temperaturas and lt; 500 oC, están caracterizadas principalmente por una morfología con apariencia lisa, compacta, homogénea y con crecimiento columnar; sin evidencia de microgrietas, ni delaminación, lo que sugiere, en este rango de temperaturas, una leve influencia de la temperatura del sustrato. Por el contrario las muestras preparadas a 500 oC presentaron la presencia de granos de mayor tamaño y a un crecimiento más compacto.