Evaluación del comportamiento del control activo en la reducción del daño usando los criterios del diseño por desempeño

dc.contributorAlvarez Marín, Diego Andrés
dc.creatorValencia Hernández, Luis Alexánder
dc.date.accessioned2021-02-08T22:46:58Z
dc.date.accessioned2022-09-21T14:01:45Z
dc.date.available2021-02-08T22:46:58Z
dc.date.available2022-09-21T14:01:45Z
dc.date.created2021-02-08T22:46:58Z
dc.date.issued2020-06-15
dc.identifierhttps://repositorio.unal.edu.co/handle/unal/79146
dc.identifier.urihttp://repositorioslatinoamericanos.uchile.cl/handle/2250/3357832
dc.description.abstractLas tecnologías de control estructural para aliviar la respuesta estructural ante diferentes cargas dinámicas, especialmente los sismos, se han convertido en un estándar a nivel mundial. Su uso está justificado no solo para la protección de la vida, sino también para la protección de los elementos no estructurales y el contenido propio de la edificación. El propósito de este trabajo de grado es aplicar el control estructural a un pórtico de acero, validando su comportamiento mediante los criterios del diseño basado en desempeño, en el que se entienda de manera más realista el riesgo asociado a la pérdida de ocupación y a las pérdidas económicas como resultado de un sismo futuro.
dc.description.abstractStructural control technologies to alleviate the structural response to di erent dynamic loads, especially earthquakes, have become a worldwide standard. Its use is justi ed not only for the protection of life, but also for the protection of non-structural elements and the content of the building itself. The purpose of this degree work is to apply structural control to a steel frame, validating its behavior using performance-based design criteria, in which the risk associated with economic losses is understood more realistically as result of a future earthquake.
dc.languagespa
dc.publisherManizales - Ingeniería y Arquitectura - Maestría en Ingeniería - Estructuras
dc.publisherDepartamento de Ingeniería Civil
dc.publisherUniversidad Nacional de Colombia - Sede Manizales
dc.relationAIS (2010). Reglamento Colombiano de Construcción Sismo Resistente. Reporte técnico, Asociación de Ingeniería Sísmica.
dc.relationAkbay, A. y Aktan, H.M. (1991). Actively regulated friction slip braces. In proceedings of the 6th Canadian Conference on Earthquake Engineering, 2(2):367{374.
dc.relationAkhlaghi, S., Zhou, N., and Huang, X. (2017). Adaptive adjustment of noise covariance in Kalman lter for dynamic state estimation. IEEE Power and Energy Society General Meeting, pages 1-5.
dc.relationAli, M. y Hassan, J. B. (2012). Weighting matrix selection method for LQR design based on a multi objetive evolutionary algorithm. Journal of Advanced Materials Research, 383:1047-054.
dc.relationASCE (2014). Seismic Evaluation and Retro t of Existing Buildings ASCE/SEI 41-13. American Society of Civil Engineers, ASCE standard ASCE/SEI 41-13 edition.
dc.relationAwad, R. R. (2012). Análisis y diseño sísmico de edi ficios. Universidad Ea t, Medellín, Colombia.
dc.relationBanazadeh, M., Gholhaki, M., and Sani, H. P. (2016). Cost-bene t analysis of seismicisolated structures with viscous damper based on loss estimation. Structure and infrastructure engineering, 13(8):1045{1055.
dc.relationBarroso, L. R. y Smith, H. A. (1999). Performance evaluation of vibration controlled steel structures under seismic load. Technical report, Stanford University.
dc.relationBlachowski, B. y Pnevmatikos, N. (2017). Neural network based vibration control of seismically excited civil structures. Periodica Polytechnica of Civil Engineering, 62(3):1{9.
dc.relationBuckle, I. G. (2000). Passive control of structures for seismic loads. In 12th World Conference on Earthquake Engineering, number 209.
dc.relationCha, Y.-J., Agrawal, A. K., Friedman, A., Phillips, B., Ahn, R., Dong, B., Dyke, S. J., Spencer, B. F., Ricles, J., and Christenson, R. (2014). Performance validations of semiactive controllers on large scale moment resisting frame equipped with 200-kN MR damper using real time hybrid simulations. Journal of Structural Engineering ASCE, 140(10):1{11.
dc.relationCha, Y. J. y Bai, J. W. (2016). Seismic fragility estimates of a moment-resisting frame building controlled by MR dampers using performance-based design. Engineering Structures, 116(10):192{202.
dc.relationChao, S. H. y Loh, C. H. (2007). Inelastic response analysis of reinforced concrete structures using modi ed force analogy method. Earthquake Engineering and Structural Dynamics, 36:1659{1683.
dc.relationChen, C.-T. (1999). Linear system theory and design. Oxford University Press, New York, NY.
dc.relationChen, C. y Chen, G. (2004). Shaking table tests of a quarter scale three storey building model with piezoelectric friction dampers. Structural Control and Health Monitoring, 11(6):239{257.
dc.relationCheng, F. Y., Juang, H., and Lou, K. (2008). Smart Structures, Innovative Systems for Seismic Response Control. CRC, Press.
dc.relationCheng, F. Y. y Jiang H. (1998). Hybrid control of seismic structures with optimal placement of control devices. ASCE Journal of Engineering Mechanics, 11(2):52.
dc.relationCheng, F. Y. y Jiang H. (1999). Optimum control of a hybrid system for seismic excitation with observer seismic state. Smart Materials and Structures, 7(5):654.
dc.relationCheng, F. Y. y P. Tian (1992). Generalized optimal active control algorithm for nonlinear seismic structures. Proceedings of the 10th World Conference on Earthquake Engineering, 44(6):860{865.
dc.relationChopra, A. K. (2012). Dynamics of Structures. Theory and applications to earthquake engineering. Prentice-Hall international series in civil engineering and engineering mechanics.
dc.relationConnor, J. J. (2001). Introduction to structural motion control. Prentice Hall.
dc.relationCornell, A. y Krawinkler, H. (2000). Progress and challenges in seismic performance assessment. PEER center news, 3:1-3.
dc.relationCut eld, M., Ma, Q., and Ryan, K. (2014). Cost-bene t analysis of base isolated and conventional buildings: A case study. In 2014 NZSEE Conference.
dc.relationDatta, T. (2003). A state of the art review on active control of structures. Journal of Earthquake Technology, 40(430):1-17.
dc.relationDyanati, M., Huang, Q., and Roke, D. (2017). Cost-bene t evaluation of self-centring concentrically braced frames considering uncertainties. Structure and infrastructure engineering, 13(5):537-553.
dc.relationFarsangi, E. N. (2011). Performance evaluation of viscoelastic and frition passive damping systems in vibration control of tall buildings. International Journal of Advanced Structural Engineering, 3(2):187-211.
dc.relationFEMA, F. E. M. A. (1997). NEHRP guidelines for the seismic rehabilitation of buildings. Technical report, Federal Emergency Management Agency FEMA.
dc.relationFEMA, F. E. M. A. (2000). Prestandard and comentary for the seismic rehabilitation of buildings. Technical report, Federal Emergency Management Agency FEMA.
dc.relationFEMA, F. E. M. A. (2018). Seismic performance assessment of buildings methodology. Technical report, Federal Emergency Management Agency FEMA.
dc.relationFerreira, F., Moutinho, C., Cunha, A., and Caetano, E. (2020). An arti cial accelerogram generator code written in Matlab. Engineering Reports, 10:1{17.
dc.relationFischinger, M. (2014). Performance based seismic engineering: vision for an earthquake resilient society, volume 32. Springer.
dc.relationFisco, N.R. y Adeli, H. (2011a). Smart structures: Part 1 - Active and semiactive control. Scientia Iranica, 18(3):275{284.
dc.relationFisco, N.R. y Adeli, H. (2011b). Smart structures: Part 2 - Hybrid control systems and control strategies. Scientia Iranica, 18(3):285-295.
dc.relationGarcía, L. E. (1998). Dinámica estructural aplicada al diseño sísmico. Universidad de los Andes.
dc.relationGhali, A., Neville, A. M., and Brown, T. (2009). Structural analysis: a uni ed classical and matrix approach. Taylor and Francis, New York, NY.
dc.relationGonzalez, O. R. y Kelkar, A. G. (2005). Robust multivariable control. The electrical engineering handbook, pages 1037-1047.
dc.relationHiemenz, G. J., Choi, Y. T., and Wereley, N. M. (2003). Seismic control of civil structures utilizing semi-active magnetorheological braces. Computer Aided Civil and Infrastructure Engineering, 18(1):31-44.
dc.relationJaramillo, J. O. (2010). Ingeniería estructural. Universidad Nacional de Colombia, Manizales, Colombia.
dc.relationJarrett, J. (2013). Performance assessment of seismic resistant steel structures. PhD thesis, Virginia Polytechnic Institute and State University.
dc.relationJi, X., Liu, D., and Hutt, C. M. (2018). Seismic performance evaluation of a high-rise building with novel hybrid coupled walls. Engineering Structures, 169:216-225.
dc.relationJung, H. J., Lee, I. W., and Kim, J.-T. (2000). Optimal structural control using neural networks. Journal of Engineering Mechanics, 126(2):201.
dc.relationKim, J. y Shin, H. (2017). Seismic loss assessment of a structure retro tted with slit-friction hybrid dampers. Engineering Structures, 130:336-350.
dc.relationKirk, D. E. (1998). Optimal control theory: An introduction. Prentice Hall, New York, NY.
dc.relationKokotovic, P. (1990). The joy of feedback: Nonlinear and adaptative. Control Systems Technology, IEEE transactions, 12(3):7-17.
dc.relationKrawinkler, H. y Miranda, E. (2004). Performance based earthquake engineering: From engineering seismology to performance based engineering. CRC press.
dc.relationKumar, A. (2005). Active control of buildings subjected to seismic excitations: Control system design using LQG optimal approach. LAMBERT Academic Publishing.
dc.relationKurata, N., Kobori, T., and Koshika, N. (2002). Performance based design with semi-active structural control technique. Earthquake Engineering and Structural Dynamics, (31):445-458.
dc.relationLee, K. S., Ricles, J., and Sause, R. (2009). Performance based seismic design of steel MRFs with elastomeric dampers. Journal of Structural Engineering ASCE, (135):489-498.
dc.relationLei, Y., Wu, D., and Lin, Y. (2015). A decentraliced control algorithm for large scale systems. Computer Aided Civil and Infrastructure Engineering, 10(30):824-842.
dc.relationG. y Wong, K. (2014). Theory of nonlinear structural analysis. John Wiley and sons.
dc.relationLi, J. J. y Li, G. Q. (2007). Advanced analysis and design of steel frames. John Wiley and sons.
dc.relationLi, Z. y Adeli, H. (2016). New discrete time robust H2/H1 algorithm for vibration control of smart structures using linear matrix inequalities. Engineering Applications of Arti cial Inteligence, 55:47-57.
dc.relationMalaviya, P., Lamba, S., and Kumar, A. (2014). Review of algorithms for control systems for civil engineering structures. International Journal of Engineering Research and Applications, pages 35-40.
dc.relationMarrs, N. (2013). Seismic performance comparison of a xed-base versus a base isolated office building. Master's thesis, Faculty of California Polytechnic State University.
dc.relationMoehle, J. y Dierlein, G. G. (2004). A framework methodology for performance based earthquake engineering. In 13th World Conference on Earthquake Engineering, number 679.
dc.relationMontanaro, M. I. (2002). Sistemas de control de vibraciones en estructuras de gran altura. Informe de la construcción, 53(477):37-39.
dc.relationNEHRP (2010). Nonlinear structural analysis for seismic design. Technical report, National Institute of Standards and Technology.
dc.relationNEHRP (2013). Nonlinear analysis research and development program for performance based seismic design. Technical report, National Institute of Standards and Technology.
dc.relationOgata, K. (2010). Ingenier a de control moderna. Prentice Hall.
dc.relationPall, A. y Pall, T. (2004). Performance based design using Pall friction dampers: An economical design solution. In 13th World Conference on Earthquake Engineering, number 1955.
dc.relationPnevmatikos, N. G. (2017). Pole placement algorithms for control of civil structures subjected to earthquake excitation. Journal of Applied and Computational Mechanics, 3:25-36.
dc.relationPnevmatikos, N. G. y Gantes, C. J. (2015). Actively and semi-actively controlled structures under seismic actions: modelling and analysis. Encyclopedia of Earthquake Engineering, pages 1-20.
dc.relationPriestley, M. (2003). Myths and Fallacies in Earthquake Engineering, Revisited. European School for Advanced Studies in Reduction of Seismic Risk.
dc.relationRabih, A. y M., G. (2003). Active structural vibration control: A review. The Shock and Vibration Digest, 35(5):367-383.
dc.relationRashid, M. y Ahmad, N. (2017). Economic losses due to earthquake - induced structural damages in RC SMRF structures. Civil and Enviromental Engineering, 4:1-15.
dc.relationSaaed, T. E., Nikolokopoulos, G., Jonasson, J.-E., and Hedlund, H. (2013). A state of the art review of structural control systems. Journal of Vibration Control, 21(5):1-19
dc.relationScott, N. T. y Snyder, D. (1995). Active control of vibration using neural network. IEEE Transactions on Neural Networks, 6(4):819-828.
dc.relationShu, Z., Li, S., Sun, X., and He, M. (2019). Performance-based Seismic Design of a Pendulum Tuned Mass Damper System. Journal of Earthquake Engineering, 23(2):334-355.
dc.relationSoong, T. T. (1990). Active Structural Control: Theory and Practice. Longman Scienti c and Technical.
dc.relationSoto, M. G. y Adeli, H. (2016). Recent advances in control algorithms for smart structures and machines. Wiley: Expert Systems, (34):1-14.
dc.relationSpencer, B. F. y Nagarajaiah, S. (2003). State of the art of structural control. Journal of Structural Engineering ASCE, 129(7):845-856.
dc.relationStengel, R. F. (1994). Optimal Control and Estimation. John Wiley and sons, United States of America.
dc.relationTaghavi, S. y Miranda, E. (2003). Response assessment of nonstructural buildings elements. Technical report, Paci c Earthquake Engineering Research Center PEER.
dc.relationTaranath, B. (2016). Tall building design: steel, concrete and composite systems. CRC Press.
dc.relationUrrego, P. (2018). Comparación del comportamiento estructural en edificaciones controladas sísmicamente con un amortiguador de masa sintonizada (tuned mass damper). Master's thesis, Escuela de Ingeniería de Antioquia.
dc.relationWang, N. y Adeli, H. (2015). Robust vibration control of wind excited highrise building structures. Journal of Civil Engineering and Management, 21:967-976.
dc.relationWong, K. y Hart, G. C. (1997). Active control of inelastic structural response during earthquakes. The Structural Design of Tall Buildings, 6:125-149.
dc.relationWong, K. y Yang, R. (1999). Inelastic dynamic response of structures using force analogy method. Journal of Engineering Mechanics, 125:1190-1199.
dc.relationXu, Y. L. y He, J. (2017). Smart civil structures. Taylor and Francis group.
dc.relationYang, J. N., Danielians, A., and Liu, S. C. (1991). A seismic hybrid control system for buildings strutcures. ASCE Journal of Engineering Mechanics, 177(4):836.
dc.relationYang, T. Y., Moehle, J., Stojadinovic, B., and Kiureghian, A. (2009). Seismic performance evaluation of facilities: Methodology and implementation. Journal of Structural Engineering ASCE, 135:1146-1154.
dc.relationYoshioka, H., Ramallo, J. C., and Spencer, B. F. J. (2002). Smart base isolation strategies employing magnetorheological dampers. ASCE Journal of Engineering Mechanics, 128(5):540.
dc.relationZameeruddin, M. y Sangle, K. K. (2016). Review on recent developments in the performance based seismic design of reinforced concrete. Structures, 6(3):119-133.
dc.relationZeng, X., Lu, X., Yang, T. Y., and Xu, Z. (2016). Application of the FEMA-P58 methodology for regional earthquake loss prediction. Nat Hazard, 83(1):177-192.
dc.relationZhang, X., Toranzo, L., Reynolds, A., Cheng, F., Xu, B., and Langhaar, V. (2012). Seismic performance assessment of active/hybrid controlled building by response probability approach. In 15th World Conference on Earthquake Engineering.
dc.rightsAtribución-NoComercial 4.0 Internacional
dc.rightsAcceso abierto
dc.rightshttp://creativecommons.org/licenses/by-nc/4.0/
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rightsDerechos reservados - Universidad Nacional de Colombia
dc.titleEvaluación del comportamiento del control activo en la reducción del daño usando los criterios del diseño por desempeño
dc.typeTesis


Este ítem pertenece a la siguiente institución