Tesis
Hormigones de alta Resistencia (f´c=56MPa) utilizando agregados del sector de Pifo y cemento armaduro especial – Lafarge.
Fecha
2014Registro en:
Carrión Ochoa, Andrés Gonzalo (2014). Hormigones de alta Resistencia (f´c=56MPa) utilizando agregados del sector de Pifo y cemento armaduro especial – Lafarge. Trabajo de Graduación previo la obtención del Título de Ingeniero Civil. Carrera de Ingeniería Civil. Quito: UCE. 181 p.
BIBLIOTECA INGENIERÍA / TICV / 1365
Autor
Carrión Ochoa, Andrés Gonzalo
Institución
Resumen
La presente investigación tiene como objetivo fundamental el diseño y fabricación de un hormigón con una resistencia requerida a la compresión f’cr = 65,7 MPa, teniendo como base de partida una resistencia especificada (f’c = 56 MPa), utilizando agregados del sector de Pifo y cemento Armaduro Especial-Lafarge. Se realizaron previamente ensayos a los agregados a utilizarse, para conocer las diferentes características de los mismos. A continuación se procedió al diseño de varias mezclas de prueba, inicialmente analizando la influencia del tamaño máximo del agregado grueso, y después determinando la inclusión en porcentajes diferentes de un aditivo superplastificante y de microsílice como parte del material cementante, además del cemento. Para los diseños se tomaron en cuenta las recomendaciones del comité ACI 211.4R-98. Los especímenes fueron sometidos a ensayos de resistencia a la compresión simple a edades de 3, 7 y 28 días, de cuyos resultados se seleccionaron los que más se acercaban a la resistencia requerida objeto de esta investigación, con lo cual se pasó a las mezclas definitivas. De los reajustes respectivos, sobre todo a la microsílice y al superplastificante y los ensayos a las probetas moldeadas para estas nuevas dosificaciones, se seleccionó la mezcla definitiva óptima, con la cual se obtuvo 69,0 MPa a los 28 días. This research has as main objective the design and manufacture of a concrete with a strength required to compression f'cr = 65.7 MPa, taking as starting point a specified resistance (f'c = 56 MPa), using aggregates of the sector of Pifo and cement Armaduro special-Lafarge. Tests were previously made to the aggregates to be used in order to know the different characteristics of the same. After that a design of different texting mixtures was done. Then proceeded to the design of several trial mixes, initially analyzing the influence of the maximum size of the coarse aggregate, and after determining the inclusion in varying percentages of an additive superplastificante and microsilica as part of the cementing material, in addition to the cement. For the designs were taken into account the recommendations of the committee ACI 211.4R-98. The specimens were subjected to tests for resistance to the simple compression at ages 3, 7 and 28 days, of whose results were selected that the closer to the required strength object of this research, which is step to the final mixes. Of the respective adjustments, especially to the microsilica and superplastificante and essays to the molded pieces for these new dosages, selected the optimal final mix, with which it was obtained 69.0 MPa at 28 days.