info:eu-repo/semantics/article
The effect of ethyl-lactate and ethyl-acetate plasticizers on PCL and PCL-HA composites foamed with supercritical CO2
Fecha
2014-10-22Registro en:
Salerno, A.; Fanovich, Maria Alejandra; Domingo Pascual, C.; The effect of ethyl-lactate and ethyl-acetate plasticizers on PCL and PCL-HA composites foamed with supercritical CO2; Elsevier Science; Journal of Supercritical Fluids; 95; 22-10-2014; 394-406
0896-8446
Autor
Salerno, A.
Fanovich, Maria Alejandra
Domingo Pascual, C.
Resumen
The present study reports foaming of polycaprolactone (PCL) and PCL nano- and micro-composites with dispersed hydroxyapatite (HA) particles by means of binary mixtures of supercritical CO2 (scCO2) and either ethyl lactate (EL) or ethyl acetate (EA) as plasticizer. The effect of the size and concentration of HA particles, as well as the effects of the plasticizer type and the incorporation route were investigated aiming to fabricate porous scaffolds with uniform morphology and controlled pore size distribution. For this purpose, foaming experiments were carried out by selecting two operating temperatures, 40 and 45 °C, and two soaking times, 1 and 17 h. Furthermore, a double step of depressurization was used to promote the development of a double-scale pore size structure in porous scaffolds useful for tissue engineering. The results of this study indicated that supercritical foaming of PCL and PCL-HA composites is enhanced when the selected operating temperature and time are 45 °C and 17 h, respectively. Furthermore, although both EL and EA plasticizers enhanced the low temperature foaming of the materials, we demonstrated that the route of incorporation of the plasticizer is a critical aspect for enhancing composite foaming and scaffold fabrication. From this point of view, the best results were achieved when EA was pre-mixed with the polymeric powder for preparing a dough for the foaming process.