Artículos de revistas
Phase transitions in biodegradable films based on blends of gelatin and poly (vinyl alcohol)
Fecha
2011Registro en:
Ciência e Tecnologia de Alimentos, v.31, n.2, p.372-379, 2011
0101-2061
10.1590/S0101-20612011000200015
Autor
SOBRAL, Paulo José do Amaral
CARVALHO, Rosemary Aparecida de
MORAES, Izabel Cristina Freitas
BITTANTE, Ana Mônica Quinta Barbosa
MONTERREY-QUINTERO, Ednelí Soraya
Institución
Resumen
The aim of this work was to study the effect of the hydrolysis degree (HD) and the concentration (C PVA) of two types of poly (vinyl alcohol) (PVA) and the effect of the type and the concentration of plasticizers on the phase properties of biodegradable films based on blends of gelatin and PVA, using a response-surface methodology. The films were made by casting and the studied properties were their glass (Tg) and melting (Tm) transition temperatures, which were determined by diferential scanning calorimetry (DSC). For the data obtained on the first scan, the fitting of the linear model was statistically significant and predictive only for the second melting temperature. In this case, the most important effect on the second Tm of the first scan was due to the HD of the PVA. In relation to the second scan, the linear model could be fit to Tg data with only two statistically significant parameters. Both the PVA and plasticizer concentrations had an important effect on Tg. Concerning the second Tm of the second scan, the linear model was fit to data with two statistically significant parameters, namely the HD and the plasticizer concentration. But, the most important effect was provoked by the HD of the PVA. O objetivo deste trabalho foi estudar o efeito do grau da hidrólise (HD) e da concentração (C PVA) de dois tipos de poli (vinil álcool) (PVA) e do tipo e da concentração de plastificantes nas propriedades de fases de filmes biodegradáveis à base de misturas de gelatina e PVA, usando-se metodologia de superfície de resposta. Os filmes foram feitos por casting e as propriedades estudadas foram a temperatura de transição vítrea (Tg) e a fusão (Tm), determinadas por calorimetria diferencial de varredura (DSC). Para os dados obtidos na primeira varredura, o ajuste do modelo linear foi estatisticamente significativo e preditivo somente para a segunda temperatura de fusão. Neste caso, o efeito mais importante foi devido ao HD do PVA. Com relação à segunda varredura, o modelo linear pôde ser ajustado aos dados de Tg com somente dois parâmetros significativos. As concentrações de PVA e de plastificante tiveram um efeito importante em Tg. Em relação à segunda temperatura de fusão da segunda varredura, o modelo linear foi ajustado aos dados, com dois parâmetros significativos, o HD e a concentração de plastificante. Mas, o efeito mais importante foi provocado pelo HD do PVA.