Artículos de revistas
Sequential cloud point extraction of trace elements from biological samples and determination by inductively coupled plasma mass spectrometry
Fecha
2008Registro en:
Journal of the Brazilian Chemical Society, v.19, n.3, p.471-477, 2008
0103-5053
10.1590/S0103-50532008000300014
Autor
GINÉ, Maria Fernanda
PATREZE, Aparecida F.
SILVA, Edson L.
SARKIS, Jorge E. S.
KAKAZU, Maurício H.
Institución
Resumen
A two-step sequential cloud point extraction (CPE) of trace elements from small sample volumes of human serum, animal blood, and food diet is proposed to gain analytical information in the analysis by inductively coupled plasma mass spectrometry. The first CPE was attained by adding O,O-diethyldithiophosphate, the non ionic surfactant Triton® X-114 followed by heating at 40 ºC, centrifugation and cooling at 0 ºC. The resulting surfactant-rich phase was separated to determine Cd, Pb and Cu by isotope dilution. Isotope ratio measurements presented RSD < 0.7%. The residual surfactant-poor phase solution had the pH adjusted in the range 4 to 5 before the chelating reagent, 4-(2-pyridylazo) resorcinol plus surfactant Triton® X-114 were added followed by the sequence to attain the CPE. Co and Ni were quantified in the second extracted surfactant-rich phases by standard additions method with RSD < 2%. Recoveries from 85 to 96% were obtained for all elements. Analyzing reference materials with certified and recommended values assessed accuracy. A extração no ponto nuvem (CPE) foi realizada em duas etapas seqüenciais para a determinação de elementos traço em soro humano, sangue animal e dieta alimentar por espectrometria de massas com fonte de plasma indutivamente acoplado. A primeira CPE foi realizada adicionando dietil-ditiofosfato, Triton® X-114 seguida de aquecimento a 40 ºC, centrifugação e esfriamento a 0 ºC. A fase rica em surfactante foi separada para determinar Cd, Pb e Cu pela técnica de quantificação por diluição isotópica. As medidas das razões isotópicas foram caracterizadas por RSD < 0.7%. O pH da solução empobrecida em surfactantante foi ajustado entre 4 e 5 antes da adição de 4-(2-pirilidazo)resorcinol, Triton® X-114 e seguiram-se os procedimentos para atingir o ponto nuvem. Na segunda fase rica em surfactante extraída foram quantificados Co e Ni pelo método de adições de padrão com RSD < 2%. Recuperações entre 85 a 96% foram obtidas para todos os elementos. A exatidão foi aferida pela análise de materiais de referência com valores recomendados e certificados.