Tesis
Mudanças microestruturais e resistencia a corrosão de aços inoxidaveis duplex apos tratamentos superficiais por refusão a laser
Microestructurals changes and corrosion resistance of the duplex stainless steel after laser surface remelting
Registro en:
(Broch.)
Autor
Nascimento, Alex Maia do
Institución
Resumen
Orientador: Maria Clara Filippini Ierardi Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica Resumo: Neste trabalho procurou-se observar as mudanças microestruturais e os efeitos na resistência à corrosão dos aços inoxidáveis duplex UNS S32304 e S32205, bastante utilizados pela indústria petrolífera, após realização de tratamentos superficiais por refusão a laser. Foram realizados inicialmente vários testes para a determinação experimental dos parâmetros de processo. Após a escolha otimizada dos parâmetros, as mudanças microestruturais foram analisadas por microscopia ótica, microscopia eletrônica de varredura - MEV, difração de raios- X e microdureza Vickers. Com isso, obteve-se dados que puderam ser comparados a condição
inicial das ligas. Para analisar o comportamento corrosivo das ligas, antes e após os tratamentos, foram feitos ensaios de polarização cíclica com utilização da solução de 3,5% de NaCI (água do mar artificial), já que os aços inoxidáveis duplex estão sendo bastante utilizados em situações offshore na indústria do petróleo. Os resultados obtidos mostraram que quando tratadas superficialmente a laser, devido à rápida resolidificação, as ligas praticamente ferritizaram, e como o teor de nitrogênio existente na composição de ambas ligas é superior ao seu limite de solubilidade na ferrita, ocorreu uma precipitação de Cr2N(nitretos de cromo) na matriz ferrítica o que promoveu uma perda de resistência à corrosão, porém um aumento significativo de dureza superficial Abstract: The objective of this work is to observe the micros1ructural changes and effects on corrosion resistance of the duplex stainless steels UNS S32304 and S32205, commonly used by the petroleum industry, following the execution of laser surface remelting treatments. Various initial tests were carried out to determine the parameters for the experimental process. Following
the optimum choice of parameters, microstructural changes were analyzed by means of optical microscopy, Scanning Electron Microscopy, X-ray Diffraction and Vickers Microhardness. In this way, data was obtained, which could then be compared with the starting condition of the alloys. In order to analyze the corrosive behavior of the alloys before and after the treatments, cyclic polarization tests were carried out. A solution of 3.5% NaCI (artificial sea water) was utilized, as duplex stainless steels are regularly used by the petroleum industry in offshore locations. The results obtained showed that when treated superflcially by laser, due to rapid resolidification, the alloys became almost ferritic, and since the leveI of nitrogen in the composition of both alloys is superior to their solubility limit in ferrite, a precipitation of Cr2N (chromium nitrides) occurred in the ferritic matrix, causing loss of corrosion resistance, thus signifying an increase in surface hardness Mestrado Área de Condentração: Materiais e Processos de Fabricação Mestre em Engenharia Mecanica
Ítems relacionados
Mostrando ítems relacionados por Título, autor o materia.
-
Application of pulsed laser ND: YAG in superduplex steel uns S 32750: Autogenous laser welding, laser welding with refusion process by laser and hybrid welding (laser/Gtaw)
Universidade Estadual Paulista (Unesp); and Technology of Mato Grosso (2020-01-01)The families of duplex and superduplex steels were developed to serve sectors that demand steels with extreme mechanical capacity and good corrosion resistance. Such characteristics are due to their structure being composed ... -
Efectos producidos por diferentes tipos de láser en córnea de cobayos: identificación de un láser capaz de provocar lesiones superficiales sin dejar cicatrices
Suarez, Alicia Carmen; Suarez, Maria Fernanda; Crim, N.; Monti, R.; Urrets-Zavalía, J. A.; Serra, H. M. (Elsevier Science, 2015-10)To evaluate the effects of four different types of lasers with different power and exposure time conditions in the cornea of normal guinea pigs. To determine which laser and conditions only damage the epithelium and ...