To evaluate the wear differences between primary and permanent enamel caused by the association of abrasion and erosion. Fragments of 40 human teeth (20 primary and 20 permanent) were cast in acrylic rings, polished to expose a flat enamel area, and evaluated with a 3D profiler. Antagonists were made from primary and permanent molars. The specimens were distributed into four groups (n = 10) according to type of substrate and slurry (neutral and acidic), and cycled 100,000 times in the OHSU oral wear simulator. Specimens were cleaned and re-profiled. Volume loss and maximum depth were determined on the polished specimens. Data were submitted to ANOVA and Tukey's test. The area of the wear facet on the antagonist was measured. Primary enamel showed more wear than permanent enamel, regardless of the slurry type. The acidic environment increased the wear rate compared to the neutral slurry. The association of abrasion and erosion increased the wear rate for the primary teeth only. There was no significant difference among groups for cusp wear and no correlation between cusp wear and the enamel wear.20394-9