Artículos de revistas
Implant test and acoustic emission technique used to investigate hydrogen assisted cracking in the melted zone of a welded HSLA-80 steel
Registro en:
Revista De Metalurgia. Cenim, v. 35, n. 4, n. 233, n. 241, 1999.
0034-8570
WOS:000082964300003
Autor
Fals, HC
Trevisan, RE
Institución
Resumen
Weld metal hydrogen assisted cracking was studied using two flux cored wire (AWS E 70T-5 and AWS E 120 T5-K4) and a mixture gas of CO2 + 5 % H-2 to induce high values of diffusible hydrogen in high strength low alloy steel (HSLA-80) weldments. An Acoustical Emission Measurement System (AEMS) RMS voltmeter was coupled to the implant test (NF 89-100) apparatus to determine energy, amplitude and event numbers of signal. All cracks were initiated in the partially melted zone and propagated into the coarse-grained region of the heat affected zone when E 70 T5 consumable was used, and the quasi-cleavage fracture mode was predominant. When E 120 T5 K4 consumable was used the cracks propagated vertically across the fusion zone, and a mixed fracture mode was the most important. A significant relationship between acoustic emission parameters and fracture modes was found. 35 4 233 241