Artículos de revistas
Paper And Surface Chemistry - Part 2 - Coating And Printability
Registro en:
Tappi Journal. , v. 1, n. 9, p. 44 - 56, 2002.
2-s2.0-3142763174
Autor
Fardim P.
Institución
Resumen
The surface chemical interaction that was involved in manufacturing and printing of paper was investigated. Different treatments like- calendering or coating were applied to paper surfaces to improve printability, optical properties and strength. Coating was found as the mixture of minerals, colloidal particles and dissolved polymers applied on the base paper that require optimum flow properties. It was found that the concept of surface engineering applied in coating and printing ink formulations made possible the development of economically beneficial paper. 1 9 44 56 Alince, B., Lepoutre, P., Porosity and optical properties of clay coatings (1980) J. Coll. Interf. Sci., 76 (2), p. 439 Allem, R., Characterization of paper coatings by scanning electron microscopy and image analysis (1998) J. Pulp Pap. Sci., 24 (10), p. 329 Aspler, J.S., Interactions of ink and water with the paper surface in printing (1993) Nord. Pulp Pap. Res. J., 8 (1), p. 68 Barber, E.J., Effect of hydrocolloids on coating color operability and coated paper properties (1973) Tappi J., 56 (1), p. 52 Beghello, L., Some factors that influence fiber flocculation (1998) Nord. Pulp Pap. Res. J., 13 (4), p. 274 Berg, J.C., The importance of acid base interactions in wetting, coating, adhesion and related phenomena (1993) Nord. Pulp Pap. Res. J., 8 (1), p. 75 Chen, C.Y., Pruett, R.J., Wygant, R.W., A review of techniques for characterizing paper coating surfaces, structures and printability (1995) Proc. Tappi Coating Adv. Fund. Symp., p. 1 Dahlvik, P., (2000) Thermal Thickening of Paper Coatings, , Doctoral Thesis, Åbo Akademi University, Turku/Åbo Dahlvik, P., Ström, G., Eklund, D., Variations in calcium ion concentration and pH influencing coating colour rheology, dewatering and immobilization Nord (1997) Pulp Pap. Res. J., 12 (1), p. 61 Diz, H.M.M., Rand, B., The variable nature of the isoelectric point of the edge surface of kaolinite (1989) Br. Ceram. Trans. J., 88, p. 162 Dollimore, D., Horridge, T.A., Dependence of flocculation behavior of china clay - Polyacrylamide suspensions on the suspensions pH (1973) J. Coll. Interf. Sci., 42 (3), p. 581 Donigian, D.W., Ishley, J.N., Wise, K., Coating pore structure and offset printed gloss (1997) Tappi J., 80 (5), p. 163 Elftonson, J., Ström, G., Penetration of aqueous solution into models for coating layers (1995) Proc. Tappi Coating Adv. Fund. Symp., p. 77 Engström, G., Morin, V., Quantitative description od the increase in surface roughness of the base paper during coating (1994) Nord. Pulp Pap. Res. J., 9 (2), p. 106 Erbil, H.Y., Calculation of spreading pressure of water on cellulosic films from contact angle data (1997) Turkey J. Chem., 21, p. 332 Eriksson, U., Rigdahl, M., Dewatering of coating colors containing CMC or starch (1994) J. Pulp Pap Sci., 20 (11), p. 333 Evans, D.F., Wennerström, H., (1999) The Colloidal Domain, Where Physics, Chemistry, Biology and Technology Meet, p. 426. , Willey, New York Fadat, G., Rigdahl, M., Interactions in coating colors Part 2. Effects of ionic strength (1986) Nord. Pulp Pap. Res. J., 1 (4), p. 37 Fardim, P., (1999) Surface Chemical Composition of Eucalyptus Kraft Pulp: Caharacterisation and Influences on Strength and Physicochemical Properties of Fibres, , PhD Thesis, Instituto de Química, Universidade Estadual de Campinas, UNICAMP, Campinas Gane, P.A.C., Waters, P., McGenity, P., Factors influencing the runnability pf coating colors at high speed (1992) Proc. Tappi Coating Conf., p. 117 Granier, V.V., Sartre, A., Joanicot, M.M., Adhesion of latex particles on inorganic surfaces (1994) Tappi J., 77 (5), p. 419 Grön, J., Eklund, D., Temperature effect on rheological and dewatering properties for starch-based coating colors (1998) Nord. Pulp Pap. Res. J., 13 (1), p. 10 Grön, J., Kuni, S., The impact of different coating pigments and molecular weight of carboxymethyl cellulose on coating structure (1995) Proc. Tappi Coating Conf., p. 447 Grön, J., Dahlvik, P., Ström, G., Influence of starch modification on the chemical composition and structure of coated layers (1998) Nord. Pulp Pap. Res. J., 13 (2), p. 119 Grön, J., (1998) Coating Suspension Structure and Rheology, , Doctoral Thesis, Åbo Akademi University, Turku/Åbo Joanicot, M., Wong, K., Cabane, B., Structure of latex films (1993) Proc. Tappi Coating Conf., p. 383 Kline, J.E., Fundamental aspects of latex mobility in paper coatings (1993) Proc. Tappi Adv. Coating Fund. Symp., p. 93 Krieger, I.M., Dougherty, T.J., A mechanism for non-Newtonian flow in suspensions of rigid spheres (1957) Trans. Soc. Rheol., 3, p. 137 Lepoutre, P., Lord, D., Desestabilized clay suspensions: Flow curves and dry film properties (1990) J. Coll. Interf. Sci., 134 (1), p. 66 Malik, J.S., Kline, J.E., A study of the effect of water soluble polymers on water holding and binder migration tendencies of coatings (1992) Proc. Tappi Coating Conf., p. 105 McGenity, P.M., Gane, P.A.C., Husband, J.C., Engley, M.S., Effect of interactions between coating color components on rheology, water retention and runnability (1992) Proc. Tappi Coating Conf., p. 133 Perry, S.S., Somorjai, G.A., Characterization of organic surfaces (1994) Anal. Chem., 63 (7), p. 403 Rand, B., Melton, I.E., Particle interactions in aqueous kaolinite suspensions 1. Effect of pH and electrolyte upon the mode of particle interaction in homoionic sodium kaolinite suspensions (1977) J. Coll. Interf. Sci., 60 (2), p. 308 Reinbold, I., Ulrich, H., Possibilities and limitations of high solids coating colors (1979) Proc. Tappi Coating Conf., p. 31 Sanders, N.D., The effect of surface modification of pigments on colloidal stability and structural performance (1992) J. Pulp Pap. Sci., 18 (5), p. 169 Sandås, S., Salminen, P., Pigment-cobinder interactions and their impact on coating rheology, dewatering and performance (1991) Tappi J., 74 (12), p. 179 Schramm, G., (1994) A Practical Approach to Rheology and Rheometry, , Haake GmbH Publication, Karlsruhe Scott, W.E., Abbott, J.C., Trosset, S., (1995) Properties of Paper: An Introduction, p. 161. , Tappi Press, Atlanta Shaw, D.J., (1980) Introduction to Colloid and Surface Chemistry, p. 208. , Butterworth, Londres Stenius, P., Järnström, L., Rigdahl, M., Aggregation in concentrated kaolin suspensions stabilized by polyacrylate (1990) Coll. Surf., 51, p. 219 Ström, G., Härdin, A.-M., Salminen, P., A novel approach for improving fibre coverage during blade coating (1995) Nord. Pulp Pap. Res. J., 10 (4), p. 227 Swerin, A., (1995) Flocculation and Fiber Network Strength in Papermaking Suspensions Flocculated by Retention Aids Systems, , PhD Thesis, Royal Institute of Technology, Stockholm Van Gilder, R.L., Purfeerst, R.D., The effect of coating color solids on properties and surface uniformity (1986) Tappi J., 69 (5), p. 119 Verhoeff, J., Hart, J.A., Gallay, W., Sizing and the mechanism of penetration of water into paper (1963) Pulp Pap, Mag. Can., 64, pp. T509 Wang, X.Q., Grön, J., Eklund, D., Temperature dependence for adsorption of carboxymethyl cellulose on clay (1996) Proc. Tappi Coating Conf., p. 79 Whalen-Shaw, M., Gautam, N., A model for colloidal and rheological characteristics of kaclin latex NaCMC formulations (1990) Proc. Tappi Coating Conf., p. 371 Whalen-Shaw, M., Coating structure - Part I: A mechanistic view to the development of wet coaling structure (1989) Proc. Tappi Coating Conf., p. 9 Wickman, M., (1998) Surface Chemical Behavior of Alkyd Resins in Offset Printing Inks, , PhD Thesis. Royal Instute of Technology, Stockholm Young, T.S., Fu, E., Associative behavior of cellulosic thickners and its implications on coating structure and Theology (1991) Tappi J., 74 (4), p. 197 Zang, Y.-H., Aspler, J.S., The effect of surface binder content on print desnity and ink reciptivity of coated paper (1998) J. Pulp Pap. Sci, 24 (5), p. 141