Artículos de revistas
The Role Of Superstructure Material On The Stress Distribution In Mandibular Full-arch Implant-supported Fixed Dentures. A Ct-based 3d-fea
Registro en:
Materials Science And Engineering C. , v. 35, n. 1, p. 92 - 99, 2014.
9284931
10.1016/j.msec.2013.10.022
2-s2.0-84888235218
Autor
Ferreira M.B.
Barao V.A.
Faverani L.P.
Hipolito A.C.
Assuncao W.G.
Institución
Resumen
This study evaluated the stress distribution in mandibular full-arch implant-supported fixed dentures with different veneering and metallic infrastructure materials, using three-dimensional finite element analysis. Ten models were obtained from an edentulous human mandible with a complete denture fixed by four implants. Acrylic resin (RES) and porcelain (POR) teeth were associated with infrastructures of titanium (Ti), gold (Au), silver-palladium (AgPd), chrome-cobalt (CoCr) and nickel-chrome (NiCr). A 100-N oblique was applied. The von Mises (σvM) and maximum (σmax) and minimum (σmin) principal stresses were obtained. The RES-AgPd group showed the lowest σvM values, while the RES-Ni-Cr group showed the highest. In the bone tissue, the RES-Au group was the only one that showed different σmax values with a 12% increase in comparison to the other groups which had similar stress values. In the implants, the groups with Ti, Au and AgPd infrastructures, either with porcelain or resin teeth, showed σvM values similar and lower in comparison to the groups with CoCr and NiCr infrastructures. The tooth veneering material influenced the stress values in metallic infrastructures, in which the acrylic resin had the highest values. The veneering and infrastructure materials have influence on stress values of implant-supported dentures, except for the peri-implant bone tissue. © 2013 Elsevier B.V. 35 1 92 99 Brånemark, P.I., (1983) J. Prosthet. Dent., 50, p. 399 Snauwaert, K., Duyck, D., Van Steenberghe, D., Quirynen, M., Naert, I., (2000) Clin. Oral Invest., 4, p. 13 Attard, N.J., Zarb, G.A., (2004) Int. J. Prosthodont., 17, p. 417 Kregzde, M., (1993) Int. J. Oral Maxillofac. Implants, 8, p. 662 Ciftci, Y., Canay, S., (2000) Int. J. Oral Maxillofac. Implants, 15, p. 571 Van Rossen, I.P., Braak, L.H., De Putter, C., De Groot, K., (1990) J. Prosthet. Dent., 64, p. 198 Stegaroiu, R., Sato, T., Kusakari, H., Miyakawa, O., (1998) Int. J. Oral Maxillofac. Implants, 13, p. 82 Papavasiliou, G., Kamposiora, P., Bayne, S.C., Felton, D.A., (1996) J. Prosthet. Dent., 76, p. 633 Assunção, W.G., Tabata, L.F., Barão, V.A., Rocha, E.P., (2008) J. Oral Rehabil., 35, p. 766 Meijer, H.J., Kuiper, J.H., Starmans, F.J., Bosman, F., (1992) J. Prosthet. Dent., 68, p. 96 Barbier, L., Vander Sloten, J., Krzesinski, E., Schepers, E., Van Der Perre, G., (1998) J. Oral Rehabil., 25, p. 847 Kawasaki, T., Takayama, Y., Yamada, T., Notami, K., (2001) J. Oral Rehabil., 28, p. 950 Teixeira, E.R., Sato, Y., Akagawa, Y., Shindoi, N., (1998) J. Oral Rehabil., 25, p. 299 Chun, H.J., Park, D.N., Han, C.H., Heo, S.J., Heo, M.S., Koak, J.Y., (2005) J. Oral Rehabil., 32, p. 193 Branemark, P.I., Hansson, B.O., Adell, R., Breine, U., Lindstrom, J., Hallen, O., Ohman, A., (1977) Scand. J. Plast. Reconstr. Surg. Suppl., 16, p. 1 Skalak, R., (1983) J. Prosthet. Dent., 49, p. 843 Geng, J.P., Tan, K.B., Liu, G.R., (2001) J. Prosthet. Dent., 85, p. 99 Hulterstrom, M., Nilsson, U., (1994) Int. J. Oral Maxillofac. Implants, 9, p. 449 Sertgöz, A., (1997) Int. J. Prosthodont., 10, p. 19 Gomes, E.A., Barao, V.A., Rocha, E.P., De Almeida, E.O., Assunção, W.G., (2011) Int. J. Oral Maxillofac. Implants, 26, p. 1202 Weiss, C.M., Weiss, A., (1999) Principles and Practice of Implant Dentistry, , second ed. Mosby Publication Company Branemark, P.I., Zarb, G., Albrektsson, T., (1985) Tissue Integrated Prostheses, , Quintessense Publishing Chicago Adell, R., Lekolm, U., Rockler, B., Branemark, P.I., (1981) Int. J. Oral Surg., 10, p. 387 Soumeire, J., Dejou, J., (1999) J. Oral Rehabil., 26, p. 394 Jemt, T., Lekholm, U., Adell, R.R., (1989) Int. J. Oral Maxillofac. Implants, 4, p. 211 Eskitascioglu, G., Baran, I., Aykac, Y., Oztas, D., (1996) Turk. J. Oral Imp., 4, p. 13 Akça, K.C., Cehreli, M.C., Iplikçioglu, H., (2002) Int. J. Prosthodont., 15, p. 115 Jacques, L.B., Moura, M.S., Suedam, V., Souza, E.A., Rubo, J.H., (2009) Clin. Oral Implants Res., 20, p. 737 Castillo-De Oyagüe, R., Osorio, R., Lynch, C., Gilmour, A., Toledano, M., (2011) Med. Oral Patol. Oral Cir. Bucal, 16, p. 619 Wakabayashi, N., Ona, M., Suzuki, T., Igarasgi, Y., (2008) J. Dent., 36, p. 463 Batenburg, R.H., Raghoebar, G.M., Van Oort, R.P., Heijdenrijk, K., Boering, G., (1998) Int. J. Oral Maxillofac. Surg., 27, p. 435 Devocht, J.W., Goel, V.K., Zeitler, D.L., Lew, D., (2001) J. Oral Maxillofac. Surg., 59, p. 775 Barão, V.A., Delben, J.A., Lima, J., Cabral, T., Assunção, W.G., (2013) J. Biomech., 46, p. 1312 Assunção, W.G., Barão, V.A., Tabata, T.F., De Sousa, E.A., Gomes, E.A., Delben, J.A., (2009) Gerodontology, 26, p. 273 Tada, S., Stegaroiu, R., Kitamura, E., Miyakawa, A., Kusakari, H., (2003) Int. J. Oral Maxillofac. Implants, 18, p. 357 Sertgöz, S., Güvener, S., (1996) J. Prosthet. Dent., 76, p. 165 Dargahi, J., Najarian, S., Talebi, M.M., (2005) Biomed. Mater. Eng., 15, p. 317 Greco, G.D., Jansen, W.C., Landre-Junior, J., Seraidarian, P.I., (2009) J. Appl. Oral Sci., 17, p. 515 Cruz, M., Wassall, T., Toledo, E.M., Barra, L.P., Cruz, S., (2009) Int. J. Oral Maxillofac. Implants, 24, p. 391 Ding, X., Zhu, X.H., Liao, S.H., Zhang, X.H., Chen, H., (2009) J. Prosthodont., 18, p. 393 Fazi, G., Tellini, S., Vangi, D., Branchi, R., (2011) Int. J. Oral Maxillofac. Implants, 26, p. 752 Cruz, M., Wassall, T., Toledo, E.M., Barra, L.P., Lemonge, A.C., (2003) Int. J. Oral Maxillofac. Implants, 18, p. 675 Cruz, M., Lourenco, A.F., Toledo, E.M., Da Silva Barra, L.P., De Castro Lemonge, A.C., Wassall, T., (2006) Technol. Health Care, 14, p. 421 Inou, N., Iioka, Y., Fujiwara, H., Maki, K., Functional adaptation of mandiular bone (1996) Computational Biomechanics, pp. 345-360. , K. Hayashi, H. Ishikawa, Springer-Verlag Tokyo Zarone, F., Apicella, A., Nicolais, L., Aversa, R., Sorrentino, R., (2003) Clin. Oral Implants Res., 14, p. 103 Tabata, L.F., Rocha, E.P., Barao, V.A., Assuncao, W.G., (2011) Int. J. Oral Maxillofac. Implants, 26, p. 482 Assunção, W.G., Gomes, E.A., Barão, V.A., De Sousa, E.A., (2009) Int. J. Oral Maxillofac. Implants, 24, p. 1040 Cochran, D.L., (2000) Clin. Oral Implant. Res., 11, p. 33 Bonnet, A.S., Postaire, M., Lipinski, P., (2009) Med. Eng. Phys., 31, p. 806 O'Mahony, A., Williams, J., Spencer, P., (2001) Clin. Oral Implant. Res., 12, p. 648 Assunção, W.G., Gomes, E.A., Barão, V.A., Delben, J.A., Tabata, L.F., De Sousa, E.A., (2010) J. Craniofac. Surg., 21, p. 689 Reilly, D.T., Burstein, A.H., (1975) J. Biomech., 8, p. 393 Ece, O.I., Nakagawa, Z., (2002) Ceram. Int., 28, p. 131 Arioli Filho, J.N., Butignon, L.E., Pereira, R.P., Lucas, M.G., Mollo, Jr.F.A., (2011) J. Appl. Oral Sci., 19, p. 249 Cibirka, R.M., Razzoog, M.E., Lang, B.R., Stohler, C.S., (1992) J. Prosthet. Dent., 67, p. 361 Hobkirk, J.A., Psarros, K.J., (1992) Int. J. Oral Maxillofac. Implants, 7, p. 345 Almeida, E.O., Rocha, E.P., Assunção, W.G., Freitas-Júnior, A.C., Martins-Júnior, M., (2010) Int. J. Oral Maxillofac. Implants, 25, p. 1108 Almeida, E.O., Rocha, E.P., Assunção, W.G., Freitas-Júnior, A.C., Anchieta, R.B., (2011) J. Prosthodont., 20, p. 29 Naini, R.B., Nokar, S., Borghei, H., Alikhasi, M., (2011) Int. J. Maxillofac. Implants, 26, p. 776 Cehreli, M.C., Akkoacaoglu, M., Comert, A., Tekdemir, I., Akca, K., (2005) Clin. Oral Implant. Res., 16, p. 540 Akca, K., Akkocaoglu, M., Comert, A., Tekdemir, I., Cehreli, M.C., (2007) Int. J. Maxillofac. Implants, 22, p. 101 Teixeira, M.F., Ramalho, S.A., De Mattias Sartori, I.A., Lehmann, R.B., (2010) Implant. Dent., 19, p. 39 Hagberg, C., (1987) J. Craniomandib. Disord, 1, p. 162 Weinberg, L.A., (1998) Implant. Dent., 7, p. 277 Weinberg, L.A., Kruger, B.B., (1995) Int. J. Prosthodont., 8, p. 421 Khamis, M.M., Zaki, H.S., Rudy, T.E., (1998) J. Prosthet. Dent., 79, p. 422 Rangert, B.O., Jemt, T., Jorneus, L., (1989) Int. J. Oral Maxillofac. Implants, 4, p. 241 Kaukinen, J., Edge, M.J., Lang Br, B.R., (1996) J. Prosthet. Dent., 76, p. 50 Falcon-Antenucci, R.M., Pellizzer, E.P., De Carvalho, P.S., Goiato, M.C., Noritomi, P.Y., (2010) J. Prosthodont., 19, p. 381 Holmgren, E.P., Seckinger, R.J., Kilgren, L.M., Mante, F., (1998) J. Oral Implantol., 24, p. 80 Petrie, C.S., Willians Jl, J.L., (2005) Clin. Oral Implants Res., 16, p. 486 Gjerdet, N.R., (1980) Acta Odontol. Scand., 38, p. 273 Glantz, P.O., (1984) J. Biol. Buccale, 12, p. 3 Nilner, K., Lekholm, U., (1985) Swed. Dent. J., 28, p. 85 Zarb, G.A., Symington, J.M., (1983) J. Prosthet. Dent., 50, p. 271 Cox, J., Zarb, G., (1985) Swed. Dent. J., 28, p. 71 Drago, C., Howell, K., (2012) J. Prosthodont., 21, p. 413 Chao, Y., Davis, M., Zarb, G.A., Judes, H., (1988) Clin. Mater., 3, p. 309 Moffa, J.P., (1982) J. Am. Dent. Assoc., 104, p. 501 Pieralini, A.R., Benjamin, C.M., Ribeiro, R.F., Scaf, G., Adabo, G.L., (2010) J. Prosthodont., 19, p. 517