Artículos de revistas
Effect Of Calcium And Magnesium Lignosulfonate In The Mechanical Resistance, Energy Consumption During Processing Of Dog Extruded Food [efeito Do Lignossulfonato De Cálcio E Magnésio Na Resistência Mecânica E Consumo De Energia Na Fabricação De Alimento Extrusado Para Cães]
Registro en:
Engenharia Agricola. Sociedade Brasileira De Engenharia Agricola, v. 34, n. 3, p. 530 - 541, 2014.
1006916
10.1590/S0100-69162014000300016
2-s2.0-84906234316
Autor
Do Nascimento T.
Ferraz A.C.O.
Biagi J.D.
Institución
Resumen
Thermoplastic extrusion of animal food is used to obtain integral extrudates since disintegration results in costly reprocessing. In this paper we outline the calcium and magnesium lignosulfonate addition effect on extrudate mechanical resistance for adult dog maintenance generic formulation in mass concentrations of 0.5; 1.0; 1.5; 2.0 and 4.0%. And also measure extruder's electrical energy consumption at industrial scale. Results showed no differences in extrudate mechanical resistance when penetration with a cylindrical probe was performed. However, compression of rigid flat parallel plates showed differences between lignosulfonate extrudates and control. The extrudate durability was not affected by lignosulfonate addition. Processing time decreased as the lignosulfonate amount increased. 34 3 530 541 Acar, N., Moran Jr., E.T., Revington, W.H., Bilgili, S.F., Effect of improved pellet quality from using a Calcium Lignosulfonate Binder on performance and carcass yield of broilers reared under different marketing schemes (1991) Poultry Science, 70, pp. 1339-1344. , Champaing Cubes, pellets, and crumbles: definitions and methods for determining density, durability, and moisture content (1994), pp. 449-451. , ASAE. S269.4. In: ASAE Standards 1994. 41thed. St Joseph American Society of Agricultural EnginiersCharnet, R., Freire, C.A.L., Charnet, E.M.R., Bonvino, H., (2008) Análise de modelos de regressão linear, p. 252. , Campinas: Editora da Unicamp Ferouz, Y.A., Fallah, P., Rosentrater, K.A., Muthukumarappan, K., Modeling single-screw extrusion processing parameters and resulting extrudate properties of DDGS-Based Nile Tilapia Oreochromis niloticus feeds (2013) Journal of Food Research, 2 (2) Ferraz, A.C.O., Honório, S.L., Propriedades físicas e mecânicas de frutas (2008) Tópicos em qualidade e pós-colheita de frutos. Campinas: Instituto Agronômico e Fundag, pp. 143-154. , In: NASCIMENTO, L. M. DE NEGRI, J. D. MATOS JUNIOR, D org Fraiha, M., (2008) Efeitos da temperatura, pressão e taxa de cisalhamento sobre a viabilidade de esporo termodúrico durante a extrusão de alimentos para animais, p. 196. , Tese (Doutorado em Engenharia Agrícola) - Universidade Estadual de Campinas, Campinas, 2008 Fraiha, M., Biagi, J.D., Ferraz, A.C.O., Sverzut, C.B., Projeto e construção de reômetro capilar para caracterização de alimentos para animais (2010) Ciência Rural, 40, p. 9. , Santa Maria González, R.J., Cavada, E.P., Peña, J.V., Torres, R.L., De Greef, D.M., Drago, S.R., Extrusion conditions and amylose content affect physicochemical properties of extrudates obtained from brown rice grains (2013) International Journal of Food Science, , http://dx.doi.org/10.1155/2013/584148, Oxford Disponível em Acesso em: 10 dez. 2013 Kaliyan, N., Morey, R.V., Factors affecting strength and durability of densified biomass products (2009) Biomass and Bioenergy, 33, pp. 337-359. , Oxford Khitrin, K.S., Fuks, S.L., Khitrin, S.V., Kazienkov, S.A., Meteleva, D.S., Lignin utilization options and methods (2012) Russian Journal of General Chemistry, 82 (5), pp. 977-984. , New York Maskell, D., Walker, P., Heath, A., The compressive strength of lignosulphonate stabilized extruded earth masonry units (2012) In: INTERNATIONAL CONFERENCE ONT THE STUDY AND CONSERVATION OF EARTHEN ARCHITECTURE HERITAGE, p. 11. , http://congreso.pucp.edu.pe/terra2012/, Lima. Terra 2012... Disponível em Acesso em: 10 dez. 2013 MELBAR PRODUTOS DE LIGNINA (2000) Lignosulfonato, p. 12. , catálogo de produtos. São Paulo Roberson, K.D., Effect of feed texture on growth performance and litter moisture when fed to growing-finishing commercial toms (2003) International Journal of Poultry Science, 2 (3), pp. 183-187. , Pakistan Rokey, G.J., Plattner, B., Souza, E.M., Feed extrusion process description (2010) Revista Brasileira Zootecnia, 39, pp. 510-518. , Viçosa, MG SINDICATO NACIONAL DA INDÚSTRIA DE ALIMENTAÇÃO ANIMAL, SINDIRAÇÕES (2009) Compêndio Brasileiro de Alimentação Animal, p. 204. , São Paulo: Sindirações SINDICATO NACIONAL DA INDÚSTRIA DE ALIMENTAÇÃO ANIMAL, SINDIRAÇÕES (2011) Boletim Informativo do Setor, dezembro, , http://www.sindiracoes.org.br, Disponível em Acessado em: 10 dez. 2013 SINDICATO NACIONAL DA INDÚSTRIA DE ALIMENTAÇÃO ANIMAL SINDIRAÇÕES (2013) Boletim Informativo do Setor, , http://www.sindiracoes.org.br, maio Disponível em Acesso em: 10 dez. 2013 Sitaula, Y., (2011) Effect of starch source, screw configuration, and steam injection on physical quality and color development of extruded fish feed, p. 28. , Thesis. (MSc) - Department of Aquacultural and Animal Sciences, Norwegian University of Life Sciences, Oslo, 2011 STATIGRAPHICS Plus for Windows 4.1, , STATPOINT TECHNOLOGIES. Professional Version. Warrenton, 1999 Tarasov, D., Shahi, C., Leitch, M., Effect of additives on wood pellet physical and thermal characteristics: a review (2013) Forestry, , http://dx.doi.org/10.1155/2013/876939, Oxford Disponível em Acesso em: 10 dez. 2013 Terra, P., Líquidos na mistura, peletização, pós-peletização e eExtrusão (2000) Anais, , In: SIMPÓSIO SOBRE TECNOLOGIA DE ADIÇÃO DE LÍQUIDOS EM SISTEMAS SÓLIDOS, 2000, Paulínia Thomas, M., Van Der Poel, A.F.B., Physical quality of pelleted animal feed 1 Criteria for pellet quality (1996) Animal Feed Science Technology, 61, pp. 89-112. , Amsterdam Umar, S., Ramezani-Fard, E., Physical properties of extruded aquafeed with a combination of sago and tapioca starches at different moisture contents (2013) Animal Feed Science Technology, , http://dx.doi.org/10.1016/j.anifeedsci.2013.03.009, Amsterdam Disponível em Acesso em: 10 dez. 2013 Wu, T., Abbott, J.A., Firmness and force relaxation characteristics of tomatoes stored intact or as slices (2002) Postharvest Biology and Technology, 24, pp. 59-68. , Amsterdam Ziggers, D., The better the pellet, the better the performance (2004) Feed Technology, 8 (6), pp. 18-21