Artículos de revistas
Drying In Cyclones - A Review
Registro en:
Drying Technology. , v. 18, n. 3, p. 791 - 832, 2000.
7373937
2-s2.0-0034163321
Autor
Nebra S.A.
Silva M.A.
Mujumdar A.S.
Institución
Resumen
This paper presents an overview of the flow, heat and mass transfer characteristics of vortex (or cyclone) dryers. The focus is on the potential of the cyclone configuration for drying of participates. A selective review is made of the literature pertains to single phase and gas-particle flow in cyclone geometries. Recent data on drying of particulates in cyclone dryers are summarized. Key Words and Phrases: vortex dryers, cyclone dryers, cyclones, heat and mass transfer in cyclones Copyright ©2000 by Marcel Dekker, Inc. 18 3 791 832 Benta, E.S., Silva, M.A., Cyclonic drying of milled corncob (1997) IADC Proceedings, 1997., A, pp. 288-294. , Suva, M.A. and Rocha, S.C.S., eds Bloor, M.I.G., Ingham, D.B., Theoretical investigation of the flow in a conical hydrocyclone (1973) Trans. Inst. Chem. Engrs., 51, pp. 36-41 Bloor, M.I.G., Ingham, D.B., Turbulent spin in a cyclone (1975) Trans. Inst. Chem. Engrs., 53, pp. 1-6 Bloor, M.I.G., Ingham, D.B., The flow in industrial cyclones (1987) J. of Fluid Mech., 178, pp. 507-519 Bonhet, M., Cyclone separation of gas/solids mixtures (1983) Ger. Chem. Eng., 6 (4), pp. 221-1220 Boysan, F., Ayers, W.H., Swithenbank, J.A., Fundamental mathematical Modeling approach to cyclone design (1982) Trans. I. Chem. E., 60, pp. 222-230 Chen, T., Zhou, L., Luo, G., Experimental studies on strongly swirling turbulent gas-particle flows using PDF a (1997) Journal of Combustion Science and Technology, 3 (4), pp. 340-343 Davidson, M.R., Similarity solutions for flow in hydrocyclones (1988) Chem. Eng. Sci., 43 (7), pp. 1499-1505 Davidson, M.R., Numerical calculations of flow in a hydrocyclone operating without an air core (1988) Appl. Math. Modeling, 12, pp. 119-128 Dibb, A., Silva, M.A., Cyclone as dryer - The optimum geometry (1997) IADC Proceedings, 1997., B, pp. 396-403. , Suva, M.A. and Rocha, S.C.S. eds Duggins, R.K., Frith, P.C.W., Turbulence anisotropy in cyclones (1987) Filtration and Separation, 24 (6), pp. 394-397 Flick, D., Lenoir, P., Gibert, H., Drying of liquids on inert particles circulating in a cyclonic device (1990) Presented in IDS'90 (International Drying Symposium), p. 1. , Prague Fraser, S.M., Razek, A.M., Abdel, A.M., Abdullah, M.Z., Computational and experimental investigations in a cyclone dust separator (1997) Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 211 (E4), pp. 247-257 Frolov, V.F., (1987) Modeling of the Drying of Dispersed Materials., 208p. , Khimiya, Leningrad, . (in Russian) Godoy, A.L., (1989) Theoretical and Experimental Study of Particles Residence Time in Gas Cyclones, p. 91. , Master's diss., Mechanical Engineering School, State University of Campinas, Brazil, ( in Portuguese) Godoy, A.L., Suva, M.A., Nebra, S.A., (1992) Experimental Residence Time of Particles in Cyclonic Reactors, Anais Do XX ENEMP., 1, pp. 251-261 Gonçalves, E.G., (1996) Cyclonic Drying of the Orange Juice Processing., p. 87. , Master's diss., Chemical Engineering School, State University of Campinas,.Brazil, (in Portuguese) Griffiths, W.D., Boysan, F., Computational fluid dynamics (CFD) and empirical modeling of the performance of a number of cyclone samplers (1996) Journal of Aerosol Science, 27 (2), pp. 281-304 Heinze, C., A new cyclone dryer for solid particles (1984) Ger. Chem. Eng., 7 (4), pp. 274-279 Hess, D., Ross, R.A., The DRT spiral drying technique (1983) Chem. Eng. Prog., 79 (4), pp. 43-50 Hwang, G.J., Shen, H.H., Modeling the phase interaction in the momentum equations of a fluid-solid mixture (1991) Int. J. Multiphase Flow, 17 (1), pp. 45-57 (1989) Vortex Heat and Mass Transfer Apparatus. (Description Catalogue), 2p Ivanov, A.A., Kudryavtsev, N.A., Calculation of the velocity field in a hydrocyclone (1987) Theor. Found, of Chem. Eng., 21 (2), pp. 157-163 Kemp, I.C., Frnkum, D.P., Abrahamson, J., Saruchera, T., Solids residence time and drying in cyclones (1998) Proceedings Os the 11th. International Drying Symposium (IDS'98), p. 581588. , Halkidiki, Greece, August 19-22, V. A Kochergina, N.N., Kuznetsov, M.D., Determination of dust separation efficiency in cyclones (1985) J. of Applied Chemistry of the USSR, 58 (10 PART), pp. 12052-12056 Lebedev, V.Y., Barulin, E.P., Fedosov, S.V., Study of the drying of dispersed material in a cyclonic equipment (1983) Izv. Vuzov. Energetica, 2, pp. 90-92. , (in Russian) Lebedev, V.Y., Barulin, E.P., Romanov, V.S., Kisel'Nikov, V.N., Combined drying of a granulated material in a fluidized bed apparatus (1987) Journal of Applied Chemistry of USSR, 60 (7), pp. 1450-1454 Lebedev, V.Y., Barulin, E.P., Romanov, V.S., Mukhin, V.V., Aerodynamic study of the two-phase flow in a cyclonic equipment (1979) Izv. Vuzov. Energetica, 22 (7), pp. 872-875. , in Russian Ter Linden, A.J., Investigations into cyclone dust collectors (1949) Proc. of the Inst. Mech. Eng. J., 160, pp. 233-251 Minier, J.P., Simonin, O., Gabillard, M., Numerical modeling of cyclone separators (1991) Fluidized Bed Combustion - ASME, pp. 1251-1259 Morsi, S.A., Alexander, A.J., An investigation of particle trajectories in two-phase flow systems (1972) J. Fluid. Mech., 55 (2 PART), pp. 193-208 Nebra, S., (1985) Pneumatic Drying of Sugar Cane Bagasse, 121p. , Ph. D. Thesis - School of Mechanical Engineering, State University of Campinas, Brazil, . (in Portuguese) Nebra, S., Macedo, I.C., Pneumatic drying of sugar cane bagasse (1989) Int. Sugar Journal, 91, pp. 3-12 De Nunes, M.H.O., Suva, M.A., Physicochemical characterization and separation study of the components of the tomato processing residue (1996) Anais Do 1 Lo Congresso Brasileiro De Engenharia Quimica, 1, pp. 49-54. , (in Portuguese) Ogawa, A., Estimation of the collection efficiencies of three types of the cyclone dust collectors from the standpoint of the flow patterns in the cylindrical cyclone dust collectors (1984) Bulletin of JSME, 21 (223), pp. 64-69 Osinskii, V.P., Titova, N.V., Khaustov, I.P., Experience of use of combined cyclone dryers (1982) Chemical and Petroleum Engineering, 18 (56), p. 215218 Parida, A., Chand, P., Turbulent swirl with gas-solid flow in cyclone (1980) Chem. Eng. Sci., 35, pp. 949-954 Patankar, S.V., (1980) Numerical Heat Transfer and Fluid Flow, 197p. , Hemisphere Publishing Co., Washington D.C Planovskii, A.N., Mushtaev, V.L., Ul'Yanov, V.M., (1979) Drying of Dispersed Material in Chemical Industry., p. 287. , Khimiya, Moscow. (in Russian) Ray, M.B., Liming, P.E., Hoffinann, A.C., Plomp, A., Beumer, M.L., Improving the removal efficiency of industrial-scale cyclones for particles smaller than five micrometre, Int (1998) J. of Min. Process., 53, pp. 39-47 Rietema, K., (1961) Cyclones in Industry. (Chapter 4: the Mechanism of the Separation of Finely Dispersed Solids in Cyclones), pp. 46-63. , Elsevier Publishing Co., Amsterdam Silva, M.A., (1991) Study of the Drying in Cyclones, 123p. , Ph. D. Thesis, School of Mechanical Engineering, State University of Campinas, S.P., Brazil, (in Portuguese) Silva, M.A., Nebra, S.A., Experimental and theoretical study of drying in cyclones (1992) Drying'92. Elsevier Sci. Pub., B, pp. 1651-1664. , MUJUMDAR, A. D., ed. Amsterdam Silva, M.A., Nebra, S.A., Numerical calculations of gas solid flow in a cyclone (1994) Drying'94 (Proceedings of the IX International Drying Symposium), B, pp. 1319-1326. , RUDOLPH, V. AND KEEY, R.B., eds Silva, M.A., Nebra, S.A., Heat transfer simulation in a cyclone (1994) Anais Do XXII ENEMP, 1, pp. 251-258. , (in Portuguese) Silva, M.A., Nebra, S.A., Numerical simulation of drying in a cyclone (1997) Drying Technology, 15 (68), pp. 1731-1741 Silva, M.A., Godoy, A.L., Nebra, S.A., Experimental study of the variation of the velocity flow field in the cyclone with the concentration of solids (1989) Anais of X Congresso Brasileiro De Engenharia Mecânica, 1, pp. 351-354. , Rio de Janeiro, R.J., Brazil (in Portuguese) Soo, S.L., (1989) Particulates and Continuum: Multiphase Fluid Dynamics, pp. 254-258. , (Chapter 6), Hemisphere Publishing Co., New York, London Stairmand, C.J., (1949) Engineering, 168, pp. 409-412 Strumillo, C., Kudra, T., Drying: Principles, applications and design (1986) Gordon and Breach Sci. Pub., 448p. , New York Ternovskii, I.J., Lazutkin, M.G., Determination of the coefficient of turbulent viscosity in hydrocyclones of various types (1986) J. Appl. Chem. (USSR), 59 (7), pp. 1510-1512 Viotto, L.A., Menegalli, F.C., Drying of spent coffee grounds in pneumatic dryer (1989) XVII Encontre Sobre Escoamento Em Meios Porosos, 10p. , Sào Carlos (SP), Brazil. (in Portuguese) Wlodarczyk, J.B., (1972) Suszenie Cial Stalych Rozdrobnionych W Ukladzie Cyklonowim (Drying of Paniculate Material in a Cyclonic System), 300p. , Ph.D. Thesis Polytechnic Institute of Chemical Engineering of Warsaw. (in Polish) Yuu, S., Jotaki, T., Tomita, Y., Yoshida, K., The reduction of pressure drop due to dust loading in a conventional cyclone (1978) Chemical Engineering Science, 33, pp. 1573-1580 Zhou, L.X., Soo, S.L., Gas-solid flow and collection of solids in a cyclone separator (1990) Powder Technology, 63, pp. 45-53 Zhou, L.X., Xu, Y., Cao, D., Experimental studies on strongly swirling turbulent gas-particle flows with swirl number of 1.0 (1997) Proceedings of the 1997 International Symposium on Multiphase Fluid, pp. 120-125. , Non-Newtonian Fluid and Physic-Chemical Fluid Flows, ISMNP'97 2