Artículos de revistas
Study Of The Homogeneity Of Drug Loaded In Polymeric Films Using Near-infrared Chemical Imaging And Split-plot Design
Registro en:
Journal Of Pharmaceutical Sciences. John Wiley And Sons Inc., v. 103, n. 8, p. 2356 - 2365, 2014.
223549
10.1002/jps.24051
2-s2.0-84905093628
Autor
Alexandrino G.L.
Poppi R.J.
Institución
Resumen
Split-plot design (SPD) and near-infrared chemical imaging were used to study the homogeneity of the drug paracetamol loaded in films and prepared from mixtures of the biocompatible polymers hydroxypropyl methylcellulose, polyvinylpyrrolidone, and polyethyleneglycol. The study was split into two parts: a partial least-squares (PLS) model was developed for a pixel-to-pixel quantification of the drug loaded into films. Afterwards, a SPD was developed to study the influence of the polymeric composition of films and the two process conditions related to their preparation (percentage of the drug in the formulations and curing temperature) on the homogeneity of the drug dispersed in the polymeric matrix. Chemical images of each formulation of the SPD were obtained by pixel-to-pixel predictions of the drug using the PLS model of the first part, and macropixel analyses were performed for each image to obtain the y-responses (homogeneity parameter). The design was modeled using PLS regression, allowing only the most relevant factors to remain in the final model. The interpretation of the SPD was enhanced by utilizing the orthogonal PLS algorithm, where the y-orthogonal variations in the design were separated from the y-correlated variation. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 103:2356-2365, 2014 © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association. 103 8 2356 2365 Gendrin, C., Roggo, Y., Collet, C., Pharmaceutical applications of vibrational chemical imaging and chemometrics: A review (2008) J Pharm Biopharm Anal, 48, pp. 533-553 Amigo, J.M., Cruz, J., Bautista, M., Maspoch, S., Coelho, J., Blanco, M., Study of pharmaceutical samples by NIR chemical-image and multivariate analysis (2008) TrAC, 27, pp. 696-713 Sabin, G.P., Breitkreitz, M.C., De Souza, A.M., Da Fonseca, P., Calefe, L., Moffa, M., Poppi, R.J., Analysis of pharmaceutical pellets: An approach using near-infrared chemical imaging (2011) Anal Chim Acta, 706, pp. 113-119 Hua, M., Anderson, C.A., Characterization of pharmaceutical powder blends by NIR chemical imaging (2008) J Pharm Sci, 97, pp. 3305-3320 Belu, A., Mahoney, C., Wormuth, K., Chemical imaging of drug eluting coatings: Combining surface analysis and confocal Raman microscopy (2008) J Control Release, 126, pp. 111-121 Sabin, G.P., Março, P.H., Poppi, R.J., Quantitative analysis of piroxicam polymorphs pharmaceutical mixtures by hyperspectral imaging and chemometrics (2011) Chemometr Int Lab Sys, 106, pp. 198-204. , Rocha WFC Sacre, P.-Y., Deconinck, E., Saerens, L., Beer, T.D., Courselle, P., Vancauwenberghe, R., Chiap, P., Beer Jo, D., Detection of counterfeit Viagra® by Raman microspectroscopy imaging and multivariate analysis (2011) J Pharm Biomed Anal, 56, pp. 454-461 Wray, P.S., Clarke, G.S., Kazarian, S.G., Application of FTIR spectroscopic imaging to study the effects of modifying the pH microenvironment on the dissolution of ibuprofen from HPMC matrices (2011) J Pharm Sci, 100, pp. 4745-4755 Ravn, C., Skibsted, E., Bro, R., Near-infrared chemical imaging (NIR-CI) on pharmaceutical solid dosage forms - Comparing common calibration approaches (2008) J Pharm Biomed Anal, 48, pp. 554-561 Thomas, B.J., Finnin, B.C., The transdermal revolution (2004) Drug Discov Today, 9, pp. 697-703 Subedi, R.K., Oh, S.Y., Chun, M.-K., Choi, H.-K., Recent advances in transdermal drug delivery (2010) Arch Pharm Res, 33, pp. 339-351 Siepmann, J., Siepmann, F., Walther, M., Macrae, R.J., Bodmeier, R., Polymer blends for controlled release coatings (2008) J Control Release, 125, pp. 1-15 Roggo, Y., Jent, N., Edmond, A., Chalus, P., Ulmscheneider, M., Characterizing process effects on pharmaceutical solid forms using near-infrared spectroscopy and infrared imaging (2005) Eur J Pharm Biopharm, 61, pp. 100-110 Sabin, G.P., Rocha, W.F.D., Poppi, R.J., Study of the similarity between distribution maps of concentration in near-infrared spectroscopy chemical imaging obtained by different multivariate calibration approaches (2011) Microchem J, 99, pp. 542-547 Amigo, J.M., Ravn, C., Direct quantification and distribution assessment of major and minor components in pharmaceutical tablets by NIR-chemical imaging (2009) Eur J Pharm Sci, 37, pp. 76-82 Amigo, J.M., Practical issues of hyperspectral imaging analysis of solid dosage forms (2010) Anal Bioanal Chem, 398, pp. 93-109 Hamad, M.L., Ellison, C.D., Khan, M.A., Lyon, R.C., Drug product characterization by macropixel analysis of chemical images (2007) J Pharm Sci, 96, pp. 3390-3401 Wu, Z., Tao, O., Cheng, W., Yu, L., Shi, X., Qiao, Y., Visualizing excipient composition and homogeneity of compound liquorice tablets by near-infrared chemical imaging (2012) Spectrochim Acta A, 86, pp. 631-636 Rosas, J.G., Blanco, M., A criterion for assessing homogeneity distribution in hyperspectral images. Part 1: Homogeneity index bases and blending processes (2012) J Pharm Biomed Anal, 70, pp. 680-690 Rosas, J.G., Blanco, M., A criterion for assessing homogeneity distribution in hyperspectral images. Part 2: Application of homogeneity indices to solid pharmaceutical dosage forms (2012) J Pharm Biomed Anal, 70, pp. 691-699 Jones, B., Nachtsheim, C.J., Split-plot designs: What, why, and how (2009) J Qual Technol, 41, pp. 340-361 Borges, C.N., Breikreitz, M.C., Bruns, R.E., Silva, L.M.C., Scarminio, I.S., Unreplicated split-plot mixture designs and statistical models for optimizing mobile chromatographic phase and extraction solutions for fingerprint searches (2007) Chemometr Intell Lab Sys, 89, pp. 82-89 Reis, C., De Andrade, J.C., Bruns, R.E., Moran, R., Application of the split-plot experimental design for the optimization of a catalytic procedure for the determination of Cr(VI) (1998) Anal Chim Acta, 369, pp. 269-279 Aastveit, A.H., Sahni, N.S., Analysis of split-plot designs: An overview and comparison of methods (2007) Qual Reliab Eng Int, 23, pp. 801-820 Cornell, J.A., (1990) Experiments with Mixtures: Designs, Models and the Analysis of Mixture Data, , 2nd ed. New York: John Wiley & Sons Kowalski, S.M., Cornell, J.A., Vining, G.G., Split-plot designs and estimation methods for mixture experiments with process variables (2002) Technometrics, 44, pp. 72-79 Kettaneh-Wold, N., Analysis of mixture data with partial least squares (1992) Chemometr Intell Lab Sys, 14, pp. 57-69 Eriksson, L., Johansson, E., Wikström, C., Mixture design - Design generation, PLS analysis, and model usage (1998) Chemometr Intell Lab Sys, 43, pp. 1-24 De Jong, S., SIMPLS: An alternative approach to partial least squares regression (1993) Chemometr Intell Lab Sys, 18, pp. 251-263 Faber, N.M., Uncertainty estimation for multivariate regression coefficients (2002) Chemometr Intell Lab Sys, 64, pp. 169-179 Faber, K., Kowalski, B.R., Propagation of measurement errors for the validation of predictions obtained by principal component regression and partial least squares (1997) J Chemometr, 11, pp. 181-238 Zhang, L., A comparison of different methods to estimate prediction uncertainty using partial least squares (PLS): A practitioner's perspective (2009) Chemometr Intell Lab Sys, 97, pp. 152-158 Trygg, J., Wold, S., Orthogonal projections to latent structures (OPLS) (2002) J Chemometr, 16, pp. 119-128 Alexandrino, G.L., Poppi, R.J., NIR imaging spectroscopy for quantification of constituents in polymers thin films loaded with paracetamol (2013) Anal Chim Acta, 765, pp. 37-44 Wold, S., Sjöström, M., Eriksson, L., PLS-regression: A basic tool of chemometrics (2001) Chemometr Intell Lab Sys, 58, pp. 109-130