Artículos de revistas
Slot-rectangular Spouted Bed: Hydrodynamic Stability And Effects Of Operating Conditions On Drying Performance
Registro en:
Drying Technology. Taylor And Francis Inc., v. 33, n. 2, p. 216 - 226, 2015.
7373937
10.1080/07373937.2014.947511
2-s2.0-84918806941
Autor
Braga M.B.
Wang Z.
Grace J.R.
Lim C.J.
Rocha S.C.S.
Institución
Resumen
A new spouted-bed configuration (rectangular cross-section with air entry through two bottom slots) was investigated as a dryer of milk and a paste mixture of milk and blackberry pulp. The aim was to analyze hydrodynamic stability and the effects of operating conditions on powder production efficiency. For the best conditions of paste-feeding flow rate, air temperature and inert type, hydrodynamic was stable and powder production efficiency was greater than 75%. The slot-rectangular spouted bed allowed for tripling of the paste-feeding flow rate at a lower air velocity compared to the conventional geometry, showing its potential for process scale-up. 33 2 216 226 Anderson, K., Raghavan, G.S.V., Mujumdar, A.S., Characteristics of asymmetric two-dimensional slot spouted beds for grains (1984) Proceedings of International Drying Symposium, pp. 205-209. , In, Kyoto, Japan, July 9–12 Dogan, O.M., Freitas, L.A.P., Lim, C.J., Grace, J.R., Luo, B., Hydrodynamics and stability of slot-rectangular spouted beds part I: Thin bed (2000) Chemical Engineering Communications, 181, pp. 225-242 Grace, J.R., Lim, C.J., Scale-up, slot-rectangular, and multiple spouting (2011) Spouted and Spout-Fluid Beds, pp. 283-296. , Epstein N., Grace J.R., (eds), In, Cambridge University Press, Cambridge Mujumdar, A.S., Spouted bed technology: A brief review (1984) Proceedings of International Drying Symposium, pp. 151-157. , In, Kyoto, Japan, July 9–12 Freitas, L.A.P., Dogan, O.M., Lim, C.J., Grace, J.R., Luo, B., Hydrodynamics and stability of slot-rectangular spouted beds part II: Increasing bed thickness (2000) Chemical Engineering Communications, 181, pp. 243-258 Chen, Z.W., (2007), Hydrodynamics, stability and scale-up of slot-rectangular spouted beds. Ph.D. thesis, University of British Columbia, Vancouver, CanadaCunha, R.L., Cruz, A.G., Menegalli, F.C., Effects of operating conditions on the quality of mango pulp dried in a spouted bed (2006) Drying Technology, 24, pp. 423-432 Freire, J.T., Ferreira, M.C., Freire, F.B., Drying of solutions, slurries, and pastes (2011) Spouted and Spout-Fluid Beds, pp. 206-221. , Epstein N., Grace J.R., (eds), Cambridge University Press, Cambridge Barret, N., Fane, A., (1984), pp. 415-420. , Drying liquid materials in spouted bed. In Proceedings of International Drying Symposium, Paris, France, September 5–8Rocha, S.C.S., Taranto, O.P., Advances in spouted bed drying of foods (2009) Advances in Food Dehydration, pp. 153-186. , Ratti C., (ed), CRC Press, Boca Raton, FL Lee, J., Drust, R.W., Wrolstad, R.E., Determination of total monomeric anthocyanin pigment content of fruit juices, beverages, natural colorants, and wines by pH differential method: Collaborative study (2005) Journal of AOAC International, 88 (5), pp. 1269-1278 Braga, M.B., Rocha, S.C.S., Drying of milk–blackberry pulp mixture in spouted bed (2013) Canadian Journal of Chemical Engineering, 91, pp. 1786-1792 Ochoa-Martinez, L.A., Brennan, J.G., Niranjan, K., Spouted bed dryer for liquid foods (1993) Food Control, 4, pp. 41-45 Medeiros, U.K.L., (2010), Technical feasibility of an unconventional route to the production of goat milk powder in Rio Grande do Norte cooperatives. Ph.D. thesis, University of Rio Grande do Norte, Brazil, (in Portuguese)Schneider, T., Bridgwater, J., The stability of wet spouted bed (1993) Drying Technology, 11 (2), pp. 277-301 Kwok, D.Y., Neumann, A.W., Contact angle measurement and contact angle interpretation (1999) Advances in Colloid and Interface Science, 81, pp. 167-249 Vieira, M.G.A., Donida, M.W., Rocha, S.C.S., Adhesion of aqueous polymeric suspension to inert particles in a spouted bed (2004) Drying Technology, 22, pp. 1069-1085 Rocha, S.C.S., Souza, J.S., Alsina, O.L.S., Medeiros, M.F.D., Drying of tropical fruit pulps: Spouted bed process optimization as a function of pulp composition (2011) Drying Technology, 29, pp. 1587-1599 Rocha, S.C.S., Donida, M.W., Marques, A.M.M., Liquid-particle surface properties on spouted bed coating and drying performance (2009) Canadian Journal of Chemical Engineering, 87, pp. 695-703 (1995) Official Methods of Analysis of Association of Official Analytical Chemists, , Association of Official Analytical Chemists, 16th ed., Association of Official Analytical Chemists, Washington, DC Fakhimi, S., Sohrabi, S., Harrison, D., Entrance effects at a multi-orifice distributor in gas-fluidised beds (1983) Canadian Journal of Chemical Engineering, 61, pp. 364-369 Kvasha, V.B., Multiple-spouted gas-fluidized beds and cyclic fluidization: operation and stability (1985) Fluidization, pp. 675-701. , Davidson J.F., Clift R., Harrison D., (eds), In, Academic Press, London http://extranet.agricultura.gov.br/sislegis-consulta/consultarLegislacao.do?operacao=visualizar&id=7896, Brazil, Ministry of Agriculture, Livestock and Food Supply. Ordinance n° 369, September 4, 1997. (accessed January 15, 2014)Bacelos, M.S., Spitzner Neto, P.I., Silveira, A.M., Freire, J.T., Analysis of fluid dynamics behavior of conical spouted beds (2005) Drying Technology, 23, pp. 427-453 Spitzner Neto, P.I., Cunha, F.O., Freire, J.T., Effect of the presence of paste in a conical spouted bed dryer with continuous feeding (2002) Drying Technology, 20, pp. 789-811