Trabajo de grado - Pregrado
Cálculo y diseño de una prensa hidráulica semiautomática tipo “H” de 100 toneladas para la Empresa Sistemas Innovadores Moldeados y Arquitectónicos, SIMA S.A.S.
Fecha
2016Registro en:
Autor
Niño Sanabria, Daniel Esneider
Sandoval Torres, Dora Andrea
Institución
Resumen
La empresa Sistemas Innovadores Moldeados y Arquitectónicos, SIMA S.A.S solicita el diseño de una prensa que satisfaga los requisitos para la fabricación de losetas en adoquín en la línea 400 ( 400??400??60 ????) y la línea de 600 600??600??60 ????. Se realizó el estudio de los diferentes tipos de prensa, teniendo en cuenta el más adecuado para realizar éste producto , seleccionando una prensa hidráulica tipo H de 100 toneladas fuerza, por lo que se procede a realizar el diseño mecánico, analizando las cargas que soporta el pórtico por medio del método de Cross, permitiendo la selección de las vigas y los elementos estructurales que lo
van a conformar, además del estudio de la unión pernada y la configuración de cada una de las partes que integran la prensa hidráulica. Para e l diseño hidráulico, se toma en cuenta la presión de trabajo del sistema (20 MPa), ya que es una de las variables involucradas en la selección de los componentes hidráulicos, los cuales van a estar accionados por un sistema de control, mediante la implementación de un PLC. El cálculo y diseño de sistemas mecánicos, hidráulicos y de control presentados es éste informe, permiten el diseño de una prensa hidráulica tipo H de 100 toneladas semiautomática para la fabricación de losetas en adoq The company Sistemas Innovadores Moldeados y Arquitectónicos, SIMA S.A.S requested the design of a press that meets the requirements for the manufacture of tiles in Cobble in the 400 ( 400??400??60 ???? ) and line 600 ( 600??600??60 ????). The study of different types of press was performed, considering the most suitable for this product, selecting an H type 100 tons force hydraulic press, so it proceeds to the mechanical design, analyzing the load supporting the porch by the method of Cross, allowing the selection of beams and structural elements that are going to form, in addition to the study of the seigneur union and configuration of each of the parts of the hydraulic press. For the hydraulic design, taking into account the pressure of the system (20 MPa), as it is one of the variables involved in the selection of the hydraulic components, which are to be driven by a control system, by implementation of a PLC. The calculation and design of mechanical, hydraulic and presented monitoring systems is this report, allow the design of an H type 100 tons semiautomatic to manufacture tiles in Cobble hydraulic press, involving applications of concepts obtained in the lines of mechanical , hydraulic and mechanical drives, supported with software tools, which monitor the behavior of elements designed, allowing future stage pose as the implementation of the machine.