Artículos de revistas
Synthesis and characterisation of a silicon oxide film solid-phase extraction system for lead traces determination: an all the way green analytical method
Fecha
2011-08Registro en:
Copello, Guillermo Javier; Martínez Vivot, Rocío; Varela, María Florencia; Diaz, Luis Eduardo; Synthesis and characterisation of a silicon oxide film solid-phase extraction system for lead traces determination: an all the way green analytical method; Taylor & Francis; International Journal of Environmental Analytical Chemistry; 91; 9; 8-2011; 828-843
0306-7319
CONICET Digital
CONICET
Autor
Copello, Guillermo Javier
Martínez Vivot, Rocío
Varela, María Florencia
Diaz, Luis Eduardo
Resumen
In this work, an all the way green analytical procedure based on a silicon oxide film-solid phase extraction system is proposed for lead traces determination. From the synthesis of a solid phase extraction (SPE) system and throughout the metal preconcentration and determination only aqueous media were employed. Characterisation of the film was carried out by Scanning Electron Microscopy and Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy. Preconcentration conditions, prior to Pb(II) Electrothermal Atomic Absorption Spectrometry (ETAAS) determination, such as adsorption and desorption time, pH and temperature, were optimised. Langmuir, Freundlich and Dubinin-Radushkevich isotherm models were analysed along with the evaluation of adsorption energy and standard free energy (ΔG 0). The greatest adsorption was obtained with incubation at pH 7 and 37°C. By using a small volume of 0.5 mol L−1 HNO3 (0.5 mL) lead was desorbed from the silicon oxide film after 2 h incubation, generating low amount of waste. The films showed better adjustment for the Langmuir model (R2 = 0.989). The detection limit (3.29σ) for Pb(II) was 0.228 µg L−1. The developed procedure is 10-fold more sensitive in comparison to direct ETAAS determination. Recovery values from soft tap-water and soft well-water were above 95%. When hard water was analysed, Pb(II) adsorption was found to be interfered by Mg2+ and Ca2+. After five preconcentration cycles relative recovery was found not to decay below 90%, indicating that the silicon oxide film could be used for multiple lead determinations.