Actas de congresos
Evaluation Of Degradation Of Bioabsorbable Polycaprolactone Used In Rapid Prototyping For Medical Application
Registro en:
9780415416023
Proceedings Of The 3rd International Conference On Advanced Research In Virtual And Rapid Prototyping: Virtual And Rapid Manufacturing Advanced Research Virtual And Rapid Prototyping. , v. , n. , p. 101 - 105, 2007.
2-s2.0-75049085879
Autor
Salgado C.L.
Sanchez E.M.S.
Zavaglia C.A.C.
Oliveira M.F.
Silva J.V.L.
Institución
Resumen
Tissue engineering is an emerging field on regenerative medicine to try to solve the end-stage of organ and tissue failure. This kind of method was developed as an alternative therapy for the treatment of tissue loss or organ failure resolving the shortage on transplantation therapy. Bone and cartilage tissue are under extensive investigation in tissue engineering research. A significant progress has been done on the recent years, although one major obstacle is to maintain the constructed tissue alive in vitro as well as in vivo. For this kind of problem a large number of bioresorbable materials and scaffolds design have been developed. They must have some especial characteristics such as three-dimensional features and highly porous structure with interconnection, biocompatibility and degradation control. Additionally, they shall present suitable surface for attachment of cells, growth and differentiation. Trying to enhance these properties it was used a bioabsorbable polymer approved by the FDA, polycaprolactone. Selective Laser Sintering (SLS) was used with a deflected laser beam selectively to scan over the powder surface following the cross-sequential profiles carried by the slice data. The interaction of the laser beam with the powder elevates the powder temperature to reach the glass-transition temperature, causing surfaces in contact to deform and fuse together. CAD models of different scaffolds were made to evaluate the most commons problems such shrinkage and distortion. In this case we observed oversize of the scaffold walls, reducing the pores size. To evaluate the material degradation rate it was used the SBF solution on 37°C on different times of immersion. After that the samples were weighted and observed on the SEM. We could see a reduction of mass percentage and it was visible bulk degradation of the material on the microscope observation. This study allows some properties of bioabsorbable polymer used in rapid prototyping (SLS), but it must be done citotoxicity tests to evaluate the biocompatibility. © 2008 Taylor & Francis Group.
101 105 Berry, E., Preliminary experience with medical applications of rapid prototyping by selective laser sintering (1997) Med Eng Phys, 19 (1), pp. 90-96 Bezwada, R.S., Monocryl suture, a new ultrapliable absorbable monofilament suture (1995) Biomaterials, 16, pp. 1141-1148 (2007) InVesalius software, , http://www.cenpra.gov.br, CenPRA , Available at Chen, D.R., Polycaprolactone microparticles and their biodegradation (2000) Polymer Degradation and Stability, 67, pp. 455-459 Chen, J.H., (1995) Polym Mater Sci Eng, 11, p. 79 Darney, P.D., Clinical evaluation of the Capronor contraceptive implant: Preliminary report (1989) Am J Obstet Gynecol, 160, pp. 1292-1295 Das, S., Freeform fabrication of nylon-6 tissue engineering scaffolds (2003) Rapid Prototyping J, 9 (1), pp. 43-49 Deckard, C.R., (1986) Generation by Layerwise Selective Sintering, , MS thesis, Department of Mechanical Engineering, University of Texas at Austin Deckard, C.R., (1988) Selective Laser Sintering, , PhD dissertation, Department of Mechanical Engineering, University of Texas at Austin Deshpande, A.A., Bioerodible polymers for ocular drug delivery (1998) Crit Rev Therapeutic Drug Carrier Systems, 15 (4), pp. 381-420 Engelberg, I., Kohn, J., Physicomechanical properties of degradable polymers used in medical applications:a comparative study (1991) Biomaterials, 12 (3), pp. 292-304 Li, Y., Effects of filtration seeding on cell density, spatial distribution and proliferation in nonwoven fibrous matrices (2001) Biotechnol. Prog, 17, pp. 935-944 Pitt, C.G., Schindler, A., Biodegradation of polymers (1983) Controlled drug delivery, pp. 55-80. , Bruck SD, editor, Boca Raton, FL: CRC Press. p Sanchlos, E., Czernuzka, J.T., Making Tissue Engineering Scaffolds Work: Review on the Application of Solid Free-form Fabrication Technology to the Production of Tissue Engineering Scaffolds (2003) European Cells and Materials, 5, pp. 29-40 Shishkovsky, I.V., The synthesis of a biocomposite based on nickel titanium and hydroxyapatite under selective laser sintering conditions (2001) Techn Phys Lett, 27 (3), pp. 211-213 Suggs, L.J., Mikos, A.G., Synthetic biodegradable polymers for medical applications (1996) Physical properties of polymers handbook, pp. 615-624. , Mark JE, editor, New York: American Institute of Physics. p Tan, K.H., Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends (2003) Biomaterials, 24 (18), pp. 3115-3123 Vail, N.K., Materials for biomedical applications (1999) Mater Design, 20 (2-3), pp. 123-132 Willians, J.M., Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering (2005) Biomaterials, 26, pp. 4817-4827 Wiria, F.E., (2007) Poly-e-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering Acta Biomaterialia, 3, pp. 1-12 Yeong, W.Y., Rapid prototyping in tissue engineering: Challenges and potential (2004) Trends in Biotechnology, 22 (12), pp. 643-652 Zein, I., Fused deposition modeling of novel scaffold architectures for tissue engineering applications (2002) Biomaterials, 23, pp. 1169-1185