Artículos de revistas
Preliminary Studies On Advanced Power Generation Based On Combined Cycle Using A Single High-pressure Fluidized Bed Boiler And Consuming Sugar-cane Bagasse
Fuel. , v. 95, n. , p. 221 - 225, 2012.
De Souza-Santos M.L.
A process based on a single high-pressure bubbling fluidized boiler consuming sugar-cane bagasse has been proposed for studies having in mind power generation. The highly pressurized boiler provides steam above critical temperature to drive steam-turbine cycle while the fuel-gas is injected into gas turbines. Preliminary studies using a comprehensive simulator for boilers and gasifiers [CSFMB © or CeSFaMB © (www.csfmb.com)] allowed a first optimization of the boiler. In addition, IPES (Industrial Process and Equipment Simulator) has been applied to predict the main features of the steam and gas turbine branches. The first phase of study has already shown advantages when compared to other processes based on the currently level of technology applied at sugar plants. In addition, is very likely that it would present gains over the BIG/GT (Biomass Integrated Gasification/Gas Turbine) mainly because it would allow feeding the fibrous bagasse as slurry, thus avoiding cumbersome and expensive cascade feeding systems. In addition, the use of supercritical boilers provides great flexibility for power generation as well steam for the processes required by sugar and alcohol units. © 2012 Elsevier Ltd. All rights reserved.95221225Williams, R.H., Biomass gasifier/gas turbine power and greenhouse warming, IEA/OECD expert seminar on energy technologies for reducing emissions of greenhouse gases (1989) OECD Headquarters, , Paris, 12-14th AprilOgden, J.M., Williams, R.H., Fulmer, M.E., Cogeneration applications of biomass gasifier/gas turbine technologies in the cane sugar and alcohol industries (1990) Conference on Energy and Environment in the 21st Century, , Massachusetts Institute of Technology, Cambridge, MA, March 26-28Larson, E.D., Biomass-gasifier/gas-turbine cogeneration in the pulp and paper industry (1991) 36th ASME International Gas Turbine and Aeroengine Congress and Exhibition, , Orlando, Florida, June 3-6Larson, E.D., Marrison, C.I., Economic scales for first-generation biomass-gasifier/gas turbine combined cycles fueled from energy plantations (1996) Turbo Expo' 96, the 41st ASME Gas Turbine and Aeroderivative Congress, , 10-13 June Birmingham, EnglandLarson, E.D., Wem, H., Performance modeling of aeroderivative steam-injected gas turbines and combined cycles fueled from fixed or fluid-bed biomass gasifiers (1996) Turbo Expo'96, the 41st ASME Gas Turbine and Aeroengine Congress, , 10-13 June Birmingham, EnglandConsonni, S., Larson, E.D., Biomass-gasifier/aeroderivative gas turbine combined cyclesPart a: Technologies and performance modeling (1994) Cogen Turbo Power'94, , The American Society of Mechanical Engineers' 8th Congress & Exposition on Gas Turbines in Cogeneration and Utility, Industrial and Independent Power Generation, Portland, Oregon, 25-27 OctoberConsonni, S., Larson, E.D., Biomass-gasifier/aeroderivative gas turbine combined cyclesPart b: Performance calculations and economic assessment (1994) Cogen Turbo Power'94, the American Society of Mechanical Engineers' 8th Congress & Exposition on Gas Turbines in Cogeneration and Utility, Industrial and Independent Power Generation, , Portland, Oregon, 25-27 OctoberLarson, E.D., Williams, R.H., Mrlv, L., A review of biomass integrated-gasifier/gas turbine combined cycle technology and its application in sugarcane industries, with an analysis for Cuba (2001) Energy for Sustainable Development, 5 (1). , MarchOakey, J., Simms, N., Kilgallon, P., Gas turbines: Gas cleaning requirements for biomass-fired systems (2004) Mater Res, 7 (1), pp. 17-25De Souza-Santos, M.L., (2010) Solid Fuels Combustion and Gasification: Modeling, Simulation, and Equipment Operation, , 2nd ed. CRC Press New York, NY, USADesouza-Santos, M.L., (2004) Solid Fuels Combustion and Gasification Modeling Simulation and Equipment Operation, , Marcel Dekker New York, NY, USADesouza-Santos, M.L., (1998) A Study on Pressurized Fluidized-bed Gasification of Biomass Through the Use of Comprehensive Simulation, Book on Combustion Technologies for A Clean Environment, 4. , Gordon and Breach Publishers Amsterdam, Holland chapterDe Souza-Santos, M.L., (1987) Modelling and Simulation of Fluidized-bed Boilers and Gasifiers for Carbonaceous Solids, , Ph.D. Thesis presented at the University of Sheffield, Department of Chemical Engineer and Fuel Technology, England, United Kingdom, JulyDe Souza-Santos, M.L., Comprehensive modelling and simulation of fluidized-bed boilers and gasifiers (1989) Fuel, 68, pp. 1507-1521De Souza-Santos, M.L., Application of comprehensive simulation to pressurized fluidized bed hydroretorting of shale (1994) Fuel, 73, pp. 1459-1465De Souza-Santos, M.L., Application of comprehensive simulation of fluidized-bed reactors to the pressurized gasification of biomass (1994) J Brazil Soc Mech Sci, 16, pp. 376-383De Souza-Santos, M.L., A study on thermo-chemically recuperated power generation systems using natural gas (1997) Fuel, 76, pp. 593-601De Souza-Santos, M.L., A feasibility study on an alternative power generation system based on biomass gasification/gas turbine concept (1999) Fuel, 78, pp. 529-538Costa, A.M.S., De Souza-Santos, M.L., Studies on the mathematical modeling of circulation rate of particles in bubbling fluidized beds (1999) Powder Technol, 103, pp. 110-116De Souza-Santos, M.L., Two trial models for the rate of combustion and gasification of liquid fuels sprayed on inert fluidized particles (2001) Sixth International Conference on Technologies and Combustion for A Clean Environment, , 9-12 July Porto - PortugalRabi, J.A., De Souza-Santos, M.L., Incorporation of a two-flux model for radiative heat transfer in a comprehensive fluidized bed simulator. Part I: Preliminary theoretical investigations (2003) Therm Eng, 3, pp. 64-70Rabi, J.A., De Souza-Santos, M.L., Incorporation of a two-flux model for radiative heat transfer in a comprehensive fluidized bed simulator. Part II: Numerical results and assessment (2004) Therm Eng, 4, pp. 49-54Costa, A.M.S., De Souza-Santos, M.L., A novel mechanism for bubble formation in fluidized systems: The effects of granular temperature on the stability in fluidization (2004) Brazil J Chem Eng, 21, pp. 479-486De Souza-Santos, M.L., A new version of CSFB, comprehensive simulator for fluidized bed equipment (2007) Fuel, 86, pp. 1684-1709De Souza-Santos, M.L., Comprehensive simulator (CSFMB) applied to circulating fluidized bed boilers and gasifiers (2008) Open Chem Eng J, 2, pp. 106-118Rabi, J.A., De Souza-Santos, M.L., Comparison of two model approaches implemented in a comprehensive fluidized-bed simulator to predict radiative heat transfer: Results for a coal-fed boiler (2008) CESES J (Int J: Comput Exp Simulations Eng Sci), 3, pp. 87-105De Souza-Santos, M.L., CSFB applied to fluidized-bed gasification of special fuels (2009) Fuel, 88, pp. 826-833Bastos-Netto, D., Riehl, R., De Souza-Santos, M.L., Conceptual design of a sugar cane bagasse gasifier (2010) ICCEU2010 - 10th International Conference on Combustion and Energy Utilization, , Mugla, Turkey, 4-8 May