Now showing items 1-10 of 742
Deposition of Al2O3 by resistive evaporation and thermal oxidation of Al to be applied as a transparent FET insulating layer
Alumina thin films have been obtained by resistive evaporation of Al layer, followed by thermal oxidation by means of annealing in appropriate atmosphere (air or O2-rich), with variation of annealing time and temperature. ...
Study of the thermal resistance of alpha-phase aluminum oxide (alpha-Al2O3) films deposited on the paper substrate
(Elsevier B.V., 2014-08-01)
The purpose of this study was to increase the thermal resistance of a cellulose substrate, using films (a mixture of corundum-phase aluminum oxide, (x-Al2O3, and a PVA solution). The corundum phase, which was chosen due ...
Thermal properties and fire resistance of jute-reinforced composites
(Taylor & Francis, 2010-02)
The thermal behaviour, fire resistance and mechanical properties of jute-reinforced composites with vinylester and resol matrix were studied. Organically modified clay was added to the polymeric matrix in order to enhance ...
Changes in the Chemical Composition and Decay Resistance of Thermally-Modified Hevea brasiliensis Wood
In this study the effect of thermal treatment on the equilibrium moisture content, chemical composition and biological resistance to decay fungi of juvenile and mature Hevea brasiliensis wood (rubber wood) was evaluated. ...
Decay resistance of thermally-modified Eucalyptus grandis wood at 140 degrees C, 160 degrees C, 180 degrees C, 200 degrees C and 220 degrees C
(Elsevier B.V., 2010-12-01)
The objective of this study was to evaluate the effect of thermal treatment on the biological resistance of Eucalyptus grandis wood to the decay fungus Picnoporus sanguineus. Boards from 5 years and 11 months old E. grandis ...
Estimation of the surface thermal resistances and heat loss by conduction using thermography
(Pergamon-Elsevier Science Ltd, 2017-03)
The thermal insulation of a construction is established by the resistances of the materials employed and the thermal surface resistances, which may vary significantly from one building to another because of its location ...
Al2O3 Obtained through resistive evaporation for use as insulating layer in transparent field effect transistor
Alumina thin films have been obtained by resistive evaporation of Al layer, followed by thermal oxidation achieved by annealing in appropriate atmosphere (air or O2-rich), with variation of annealing time and temperature. ...
Machining damage analysis of alumina in relation to thermal shock behavior
Machining damage of alumina disks with two different finishes, C and F, was analyzed with the aim of explaining the differences in their thermal shock responses. Thermal treatments designed to simulate conditions in thermal ...
Abrasion and corrosion resistance of new Ni-based coating deposited by HVOF thermal spray process
(MANEY PUBLISHING, 2010)
Coatings based on NiCrAlC intermetallic based alloy were applied on AISI 316L stainless steel substrates using a high velocity oxygen fuel torch. The influence of the spray parameters on friction and abrasive wear resistance ...
Heat resistance and the effects of continuous pasteurization on the inactivation of Byssochlamys fulva ascospores in clarified apple juice
(Wiley-blackwell Publishing, IncMaldenEUA, 2009)